1
1
openmpi/src/mca/base/mca_base_param.c

909 строки
25 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2004-2005 The Trustees of Indiana University.
* All rights reserved.
* Copyright (c) 2004-2005 The Trustees of the University of Tennessee.
* All rights reserved.
* $COPYRIGHT$
*
* Additional copyrights may follow
*
* $HEADER$
*/
#include "ompi_config.h"
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "include/constants.h"
#include "class/ompi_value_array.h"
#include "class/ompi_hash_table.h"
#if 0
/* JMS commented out for now -- see lookup_keyvals() below for an
explanation */
#include "attribute/attribute.h"
#endif
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
#include "util/printf.h"
#include "util/argv.h"
#include "mca/mca.h"
#include "mca/base/mca_base_param.h"
#include "mca/base/mca_base_param_internal.h"
/*
* Public variables
*
* This variable is public, but not advertised in mca_base_param.h.
* It's only public so that ompi_info can see it. The relevant component
* in ompi_info will provide an extern to see this variable.
*/
ompi_value_array_t mca_base_params;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
ompi_list_t mca_base_param_file_values;
/*
* local variables
*/
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
static const char *mca_prefix = "OMPI_MCA_";
static char *home = NULL;
static bool initialized = false;
/*
* local functions
*/
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
static int read_files(char *file_list);
static int param_register(const char *type_name, const char *component_name,
const char *param_name,
const char *mca_param_name,
mca_base_param_type_t type,
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
mca_base_param_storage_t *default_value,
mca_base_param_storage_t *file_value,
mca_base_param_storage_t *override_value);
static bool param_lookup(size_t index, mca_base_param_storage_t *storage,
ompi_hash_table_t *attrs);
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
static bool lookup_keyvals(mca_base_param_t *param,
mca_base_param_storage_t *storage,
ompi_hash_table_t *attrs);
static bool lookup_env(mca_base_param_t *param,
mca_base_param_storage_t *storage);
static bool lookup_file(mca_base_param_t *param,
mca_base_param_storage_t *storage);
static bool lookup_default(mca_base_param_t *param,
mca_base_param_storage_t *storage);
static bool set(mca_base_param_type_t type,
mca_base_param_storage_t *dest, mca_base_param_storage_t *src);
static void param_constructor(mca_base_param_t *p);
static void param_destructor(mca_base_param_t *p);
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
static void fv_constructor(mca_base_param_file_value_t *p);
static void fv_destructor(mca_base_param_file_value_t *p);
/*
* Make the class instance for mca_base_param_t
*/
OBJ_CLASS_INSTANCE(mca_base_param_t, ompi_object_t,
param_constructor, param_destructor);
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
OBJ_CLASS_INSTANCE(mca_base_param_file_value_t, ompi_list_item_t,
fv_constructor, fv_destructor);
/*
* Set it up
*/
int mca_base_param_init(void)
{
int id;
char *files;
if (!initialized) {
/* Init the value array for the param storage */
OBJ_CONSTRUCT(&mca_base_params, ompi_value_array_t);
ompi_value_array_init(&mca_base_params, sizeof(mca_base_param_t));
/* Init the file param value list */
OBJ_CONSTRUCT(&mca_base_param_file_values, ompi_list_t);
/* Set this before we register the parameter, below */
initialized = true;
/* We may need this later */
home = getenv("HOME");
/* Initialize a parameter that says where MCA param files can
be found */
asprintf(&files,
"~/.openmpi/mca-params.conf:%s/openmpi-mca-params.conf",
OMPI_SYSCONFDIR);
id = mca_base_param_register_string("base", NULL, "param_files",
"param_files", files);
free(files);
/* Read in MCA parameters from files */
mca_base_param_lookup_string(id, &files);
read_files(files);
free(files);
}
return OMPI_SUCCESS;
}
/*
* Register an integer MCA parameter
*/
int mca_base_param_register_int(const char *type_name,
const char *component_name,
const char *param_name,
const char *mca_param_name,
int default_value)
{
mca_base_param_storage_t storage;
storage.intval = default_value;
return param_register(type_name, component_name, param_name, mca_param_name,
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
MCA_BASE_PARAM_TYPE_INT, &storage, NULL, NULL);
}
/*
* Register a string MCA parameter.
*/
int mca_base_param_register_string(const char *type_name,
const char *component_name,
const char *param_name,
const char *mca_param_name,
const char *default_value)
{
mca_base_param_storage_t storage;
if (NULL != default_value) {
storage.stringval = (char *) default_value;
} else {
storage.stringval = NULL;
}
return param_register(type_name, component_name, param_name, mca_param_name,
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
MCA_BASE_PARAM_TYPE_STRING, &storage, NULL, NULL);
}
/*
* Associate a keyval with a parameter index
*/
int mca_base_param_kv_associate(size_t index, int keyval)
{
size_t len;
mca_base_param_t *array;
if (!initialized) {
return OMPI_ERROR;
}
len = ompi_value_array_get_size(&mca_base_params);
if (0 > index || index > len) {
return OMPI_ERROR;
}
/* We have a valid entry (remember that we never delete MCA
parameters, so if the index is >0 and <len, it must be good), so
save the keyval */
array = OMPI_VALUE_ARRAY_GET_BASE(&mca_base_params, mca_base_param_t);
array[index].mbp_keyval = keyval;
/* All done */
return OMPI_SUCCESS;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/*
* Look up an integer MCA parameter.
*/
int mca_base_param_lookup_int(int index, int *value)
{
mca_base_param_storage_t storage;
if (param_lookup(index, &storage, NULL)) {
*value = storage.intval;
return OMPI_SUCCESS;
}
return OMPI_ERROR;
}
/*
* Look up an integer MCA parameter, including in attributes
*/
int mca_base_param_kv_lookup_int(int index, ompi_hash_table_t *attrs,
int *value)
{
mca_base_param_storage_t storage;
if (param_lookup(index, &storage, attrs)) {
*value = storage.intval;
return OMPI_SUCCESS;
}
return OMPI_ERROR;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/*
* Set an integer parameter
*/
#if 0
#error JMS: Need to figure out what to do here
#endif
/*
* Look up a string MCA parameter.
*/
int mca_base_param_lookup_string(int index, char **value)
{
mca_base_param_storage_t storage;
if (param_lookup(index, &storage, NULL)) {
*value = storage.stringval;
return OMPI_SUCCESS;
}
return OMPI_ERROR;
}
/*
* Look up a string MCA parameter, including in attributes.
*/
int mca_base_param_kv_lookup_string(int index, ompi_hash_table_t *attrs,
char **value)
{
mca_base_param_storage_t storage;
if (param_lookup(index, &storage, attrs)) {
*value = storage.stringval;
return OMPI_SUCCESS;
}
return OMPI_ERROR;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/*
* Set an string parameter
*/
#if 0
#error JMS: Need to figure out what to do here
#endif
/*
* Find the index for an MCA parameter based on its names.
*/
int mca_base_param_find(const char *type_name, const char *component_name,
const char *param_name)
{
size_t i, size;
mca_base_param_t *array;
/* Check for bozo cases */
if (!initialized) {
return OMPI_ERROR;
}
if (NULL == type_name) {
return OMPI_ERROR;
}
/* Loop through looking for a parameter of a given
type/component/param */
size = ompi_value_array_get_size(&mca_base_params);
array = OMPI_VALUE_ARRAY_GET_BASE(&mca_base_params, mca_base_param_t);
for (i = 0; i < size; ++i) {
if (0 == strcmp(type_name, array[i].mbp_type_name) &&
((NULL == component_name && NULL == array[i].mbp_component_name) ||
(NULL != component_name && NULL != array[i].mbp_component_name &&
0 == strcmp(component_name, array[i].mbp_component_name))) &&
((NULL == param_name && NULL == array[i].mbp_param_name) ||
(NULL != param_name && NULL != array[i].mbp_param_name &&
0 == strcmp(param_name, array[i].mbp_param_name)))) {
return i;
}
}
/* Didn't find it */
return OMPI_ERROR;
}
/*
* Shut down the MCA parameter system (normally only invoked by the
* MCA framework itself).
*/
int mca_base_param_finalize(void)
{
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
ompi_list_item_t *item;
mca_base_param_t *array;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (initialized) {
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* This is slow, but effective :-) */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
array = OMPI_VALUE_ARRAY_GET_BASE(&mca_base_params, mca_base_param_t);
while (ompi_value_array_get_size(&mca_base_params) > 0) {
OBJ_DESTRUCT(&array[0]);
ompi_value_array_remove_item(&mca_base_params, 0);
}
OBJ_DESTRUCT(&mca_base_params);
for (item = ompi_list_remove_first(&mca_base_param_file_values);
NULL != item;
item = ompi_list_remove_first(&mca_base_param_file_values)) {
OBJ_RELEASE(item);
}
OBJ_DESTRUCT(&mca_base_param_file_values);
initialized = false;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* All done */
return OMPI_SUCCESS;
}
/*************************************************************************/
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
static int read_files(char *file_list)
{
int i;
char **files;
/* Iterate through all the files passed in -- read them in reverse
order so that we preserve unix/shell path-like semantics (i.e.,
the entries farthest to the left get precedence) */
files = ompi_argv_split(file_list, ':');
for (i = ompi_argv_count(files) - 1; i >= 0; --i) {
mca_base_parse_paramfile(files[i]);
}
ompi_argv_free(files);
return OMPI_SUCCESS;
}
static int param_register(const char *type_name, const char *component_name,
const char *param_name, const char *mca_param_name,
mca_base_param_type_t type,
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
mca_base_param_storage_t *default_value,
mca_base_param_storage_t *file_value,
mca_base_param_storage_t *override_value)
{
int ret;
size_t i, len;
mca_base_param_t param, *array;
/* Initialize the array if it has never been initialized */
if (!initialized) {
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
mca_base_param_init();
}
/* Error check */
if (NULL == type_name) {
return OMPI_ERR_BAD_PARAM;
}
/* Create a parameter entry. If a keyval is to be used, it will be
registered elsewhere. We simply assign -1 here. */
OBJ_CONSTRUCT(&param, mca_base_param_t);
param.mbp_type = type;
param.mbp_keyval = MPI_KEYVAL_INVALID;
param.mbp_type_name = strdup(type_name);
if (NULL == param.mbp_type_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERR_OUT_OF_RESOURCE;
}
if (NULL != component_name) {
param.mbp_component_name = strdup(component_name);
if (NULL == param.mbp_component_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERR_OUT_OF_RESOURCE;
}
} else {
param.mbp_param_name = NULL;
}
if (NULL != param_name) {
param.mbp_param_name = strdup(param_name);
if (NULL == param.mbp_param_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERR_OUT_OF_RESOURCE;
}
} else {
param.mbp_param_name = NULL;
}
/* The full parameter name may have been specified by the caller.
If it was, use that (only for backwards compatability).
Otherwise, derive it from the type, component, and parameter
name. */
param.mbp_env_var_name = NULL;
if (NULL != mca_param_name) {
param.mbp_full_name = strdup(mca_param_name);
if (NULL == param.mbp_full_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERROR;
}
} else {
len = 16 + strlen(type_name);
if (NULL != component_name) {
len += strlen(component_name);
}
if (NULL != param_name) {
len += strlen(param_name);
}
param.mbp_full_name = malloc(len);
if (NULL == param.mbp_full_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERROR;
}
/* Copy the name over in parts */
strncpy(param.mbp_full_name, type_name, len);
if (NULL != component_name) {
strcat(param.mbp_full_name, "_");
strcat(param.mbp_full_name, component_name);
}
if (NULL != param_name) {
strcat(param.mbp_full_name, "_");
strcat(param.mbp_full_name, param_name);
}
}
/* Create the environment name */
len = strlen(param.mbp_full_name) + strlen(mca_prefix) + 16;
param.mbp_env_var_name = malloc(len);
if (NULL == param.mbp_env_var_name) {
OBJ_DESTRUCT(&param);
return OMPI_ERROR;
}
snprintf(param.mbp_env_var_name, len, "%s%s", mca_prefix,
param.mbp_full_name);
/* Figure out the default value; zero it out if a default is not
provided */
if (NULL != default_value) {
if (MCA_BASE_PARAM_TYPE_STRING == param.mbp_type &&
NULL != default_value->stringval) {
param.mbp_default_value.stringval = strdup(default_value->stringval);
} else {
param.mbp_default_value = *default_value;
}
} else {
memset(&param.mbp_default_value, 0, sizeof(param.mbp_default_value));
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* Figure out the file value; zero it out if a file is not
provided */
if (NULL != file_value) {
if (MCA_BASE_PARAM_TYPE_STRING == param.mbp_type &&
NULL != file_value->stringval) {
param.mbp_file_value.stringval = strdup(file_value->stringval);
} else {
param.mbp_file_value = *file_value;
}
} else {
memset(&param.mbp_file_value, 0, sizeof(param.mbp_file_value));
}
/* Figure out the override value; zero it out if a override is not
provided */
if (NULL != override_value) {
if (MCA_BASE_PARAM_TYPE_STRING == param.mbp_type &&
NULL != override_value->stringval) {
param.mbp_override_value.stringval = strdup(override_value->stringval);
} else {
param.mbp_override_value = *override_value;
}
} else {
memset(&param.mbp_override_value, 0, sizeof(param.mbp_override_value));
}
/* See if this entry is already in the array */
len = ompi_value_array_get_size(&mca_base_params);
array = OMPI_VALUE_ARRAY_GET_BASE(&mca_base_params, mca_base_param_t);
for (i = 0; i < len; ++i) {
if (0 == strcmp(param.mbp_full_name, array[i].mbp_full_name)) {
/* We found an entry with the same param name. Free the old
value (if it was a string */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (MCA_BASE_PARAM_TYPE_STRING == array[i].mbp_type) {
if (NULL != array[i].mbp_default_value.stringval) {
free(array[i].mbp_default_value.stringval);
}
if (NULL != array[i].mbp_file_value.stringval) {
free(array[i].mbp_file_value.stringval);
}
if (NULL != array[i].mbp_override_value.stringval) {
free(array[i].mbp_override_value.stringval);
}
}
/* Now put in the new value */
if (MCA_BASE_PARAM_TYPE_STRING == param.mbp_type) {
if (NULL != param.mbp_default_value.stringval) {
array[i].mbp_default_value.stringval =
strdup(param.mbp_default_value.stringval);
} else {
array[i].mbp_default_value.stringval = NULL;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (NULL != param.mbp_file_value.stringval) {
array[i].mbp_file_value.stringval =
strdup(param.mbp_file_value.stringval);
} else {
array[i].mbp_file_value.stringval = NULL;
}
if (NULL != param.mbp_override_value.stringval) {
array[i].mbp_override_value.stringval =
strdup(param.mbp_override_value.stringval);
} else {
array[i].mbp_override_value.stringval = NULL;
}
} else {
array[i].mbp_default_value.intval =
param.mbp_default_value.intval;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
array[i].mbp_file_value.intval =
param.mbp_file_value.intval;
array[i].mbp_override_value.intval =
param.mbp_override_value.intval;
}
/* Just in case we changed type */
array[i].mbp_type = param.mbp_type;
/* Now delete the newly-created entry (since we just saved the
value in the old entry) */
OBJ_DESTRUCT(&param);
return i;
}
}
/* Add it to the array */
if (OMPI_SUCCESS !=
(ret = ompi_value_array_append_item(&mca_base_params, &param))) {
return ret;
}
return ompi_value_array_get_size(&mca_base_params) - 1;
}
/*
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
* Lookup a parameter in multiple places
*/
static bool param_lookup(size_t index, mca_base_param_storage_t *storage,
ompi_hash_table_t *attrs)
{
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
size_t size;
mca_base_param_t *array;
char *p, *q;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* Lookup the index and see if it's valid */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (!initialized) {
return false;
}
size = ompi_value_array_get_size(&mca_base_params);
if (index > size) {
return false;
}
array = OMPI_VALUE_ARRAY_GET_BASE(&mca_base_params, mca_base_param_t);
/* Ensure that MCA param has a good type */
if (MCA_BASE_PARAM_TYPE_INT != array[index].mbp_type &&
MCA_BASE_PARAM_TYPE_STRING != array[index].mbp_type) {
return false;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* Check all the places that the param may be hiding, in priority
order */
if (lookup_keyvals(&array[index], storage, attrs) ||
lookup_env(&array[index], storage) ||
lookup_file(&array[index], storage) ||
lookup_default(&array[index], storage)) {
/* If we're returning a string, replace all instances of "~/"
with the user's home directory */
if (MCA_BASE_PARAM_TYPE_STRING == array[index].mbp_type &&
NULL != storage->stringval) {
if (0 == strncmp(storage->stringval, "~/", 2)) {
asprintf(&p, "%s/%s", home, storage->stringval + 2);
free(storage->stringval);
storage->stringval = p;
}
p = strstr(storage->stringval, ":~/");
while (NULL != p) {
*p = '\0';
asprintf(&q, "%s:%s%s", storage->stringval, home, p + 2);
free(storage->stringval);
storage->stringval = q;
p = strstr(storage->stringval, ":~/");
}
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
return true;
}
/* Didn't find it. Doh! */
return false;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
}
/*
* Lookup a param in the set of attributes/keyvals
*/
static bool lookup_keyvals(mca_base_param_t *param,
mca_base_param_storage_t *storage,
ompi_hash_table_t *attrs)
{
#if 1
/* JMS: Comment this out for now, because it drags in all of
libmpi. This is undesirable for programs like mpirun, etc.
Need a better solution for this -- perhaps a registration kind
of thing...? */
return false;
#else
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
int err, flag;
/* If this param has a keyval and we were provided with a hash
table, look it up and see if we can find a value */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (-1 != param->mbp_keyval) {
/* Use the stringval member of the union because it's definitely
big enough to handle both (int) and (char*) */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
err = ompi_attr_get(attrs, param->mbp_keyval,
&storage->stringval, &flag);
if (OMPI_SUCCESS == err && 1 == flag) {
/* Because of alignment weirdness between (void*) and int, we
must grab the lower sizeof(int) bytes from the (char*) in
stringval, in case sizeof(int) != sizeof(char*). */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (MCA_BASE_PARAM_TYPE_INT == param->mbp_type) {
storage->intval = *((int *) (storage->stringval +
sizeof(void *) - sizeof(int)));
}
/* Nothing to do for string -- we already have the value loaded
in the right place */
return true;
}
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* Either this param has not keyval or we didn't find the keyval */
return false;
#endif
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
}
/*
* Lookup a param in the environment
*/
static bool lookup_env(mca_base_param_t *param,
mca_base_param_storage_t *storage)
{
char *env;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (NULL != param->mbp_env_var_name &&
NULL != (env = getenv(param->mbp_env_var_name))) {
if (MCA_BASE_PARAM_TYPE_INT == param->mbp_type) {
storage->intval = atoi(env);
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
} else if (MCA_BASE_PARAM_TYPE_STRING == param->mbp_type) {
storage->stringval = strdup(env);
}
return true;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/* Didn't find it */
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
return false;
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/*
* Lookup a param in the files
*/
static bool lookup_file(mca_base_param_t *param,
mca_base_param_storage_t *storage)
{
ompi_list_item_t *item;
mca_base_param_file_value_t *fv;
/* See if we previously found a match from a file. If so, just
return that */
if (param->mbp_file_value_set) {
return set(param->mbp_type, storage, &param->mbp_file_value);
}
/* Scan through the list of values read in from files and try to
find a match. If we do, cache it on the param (for future
lookups) and save it in the storage. */
for (item = ompi_list_get_first(&mca_base_param_file_values);
ompi_list_get_end(&mca_base_param_file_values) != item;
item = ompi_list_get_next(item)) {
fv = (mca_base_param_file_value_t *) item;
if (0 == strcmp(fv->mbpfv_param, param->mbp_full_name)) {
if (MCA_BASE_PARAM_TYPE_INT == param->mbp_type) {
if (NULL != fv->mbpfv_value) {
param->mbp_file_value.intval = atoi(fv->mbpfv_value);
} else {
param->mbp_file_value.intval = 0;
}
} else {
param->mbp_file_value.stringval = fv->mbpfv_value;
fv->mbpfv_value = NULL;
}
param->mbp_file_value_set = true;
/* Since this is now cached on the param, we might as well
remove it from the list and make future file lookups
faster */
ompi_list_remove_item(&mca_base_param_file_values,
(ompi_list_item_t *) fv);
OBJ_RELEASE(fv);
return set(param->mbp_type, storage, &param->mbp_file_value);
}
}
return false;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
}
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
/*
* Return the default value for a param
*/
static bool lookup_default(mca_base_param_t *param,
mca_base_param_storage_t *storage)
{
return set(param->mbp_type, storage, &param->mbp_default_value);
}
static bool set(mca_base_param_type_t type,
mca_base_param_storage_t *dest, mca_base_param_storage_t *src)
{
switch (type) {
case MCA_BASE_PARAM_TYPE_INT:
dest->intval = src->intval;
break;
case MCA_BASE_PARAM_TYPE_STRING:
if (NULL != src->stringval) {
dest->stringval = strdup(src->stringval);
} else {
dest->stringval = NULL;
}
break;
default:
return false;
break;
}
return true;
}
/*
* Create an empty param container
*/
static void param_constructor(mca_base_param_t *p)
{
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
p->mbp_type = MCA_BASE_PARAM_TYPE_MAX;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
p->mbp_type_name = NULL;
p->mbp_component_name = NULL;
p->mbp_param_name = NULL;
p->mbp_full_name = NULL;
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
p->mbp_keyval = -1;
p->mbp_env_var_name = NULL;
p->mbp_default_value.stringval = NULL;
p->mbp_file_value_set = false;
p->mbp_file_value.stringval = NULL;
p->mbp_override_value_set = false;
p->mbp_override_value.stringval = NULL;
}
/*
* Free all the contents of a param container
*/
static void param_destructor(mca_base_param_t *p)
{
- New capability for MCA parameters to be read from files. Order of resolution is now (effectively): - read from MPI keyval (if associated) - read from command line - read from environment - read from file More capabilities will be added shortly for developers to programatically set MCA parameter values - Create [empty but commented] system-wide MCA param file that gets installed at $sysconf/openmpi-mca-params.conf (i.e., $prefix/etc/openmpi-mca-params.conf) - The following files are opened and read (in order): 1. $sysconf/openmpi-mca-params.conf 2. $HOME/.openmpi/mca-params.conf Specifically, the values in 2) will override the values in 1) (so users can override system-wide defaults. - Update MCA string params to allow for "~/" in the middle to be expanded to the user's home directory. - Added to default value of MCA parameter component_path to be: $pkglibdir:$HOME/.openmpi/components $pkglibdir is typically $prefix/lib/openmpi. So now both of these directories will be searched for components at run time (in all Open MPI executables, including ompi_info). Note that this is an MCA parameter, so it, too, can be changed at run-time. - Updated all docs to match this behavior -- some is \internal, so it doesn't show unless you tell doxygen to generate internal docs (which is not the default) - update ompi_info to handle new behavior; ompi_info --param now shows the *current* default value (i.e., it will look in the environment and/or files to find out what the default values are -- so if you change a value in $HOME/.openmpi/mca-params.conf, it should be reflected in "ompi_info --param all all") - updated bunches of doxygen docs to match - this diff is slightly artifically large -- some of the changes are converstions to 4 space tabs (I re-indented my own code that previously used 2 space tabs) This commit was SVN r2408.
2004-08-31 13:49:56 +04:00
if (NULL != p->mbp_type_name) {
free(p->mbp_type_name);
}
if (NULL != p->mbp_component_name) {
free(p->mbp_component_name);
}
if (NULL != p->mbp_param_name) {
free(p->mbp_param_name);
}
if (NULL != p->mbp_env_var_name) {
free(p->mbp_env_var_name);
}
if (NULL != p->mbp_full_name) {
free(p->mbp_full_name);
}
if (MCA_BASE_PARAM_TYPE_STRING == p->mbp_type) {
if (NULL != p->mbp_default_value.stringval) {
free(p->mbp_default_value.stringval);
}
if (p->mbp_file_value_set &&
NULL != p->mbp_file_value.stringval) {
free(p->mbp_file_value.stringval);
}
if (p->mbp_override_value_set &&
NULL != p->mbp_override_value.stringval) {
free(p->mbp_override_value.stringval);
}
}
}
static void fv_constructor(mca_base_param_file_value_t *f)
{
f->mbpfv_param = NULL;
f->mbpfv_value = NULL;
}
static void fv_destructor(mca_base_param_file_value_t *f)
{
if (NULL != f->mbpfv_param) {
free(f->mbpfv_param);
}
if (NULL != f->mbpfv_value) {
free(f->mbpfv_value);
}
}