openmpi/ompi/mca/topo/base/topo_base_comm_select.c

/*
 * Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
 *                         University Research and Technology
 *                         Corporation.  All rights reserved.
 * Copyright (c) 2004-2005 The University of Tennessee and The University
 *                         of Tennessee Research Foundation.  All rights
 *                         reserved.
 * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
 *                         University of Stuttgart.  All rights reserved.
 * Copyright (c) 2004-2005 The Regents of the University of California.
 *                         All rights reserved.
 * $COPYRIGHT$
 * 
 * Additional copyrights may follow
 * 
 * $HEADER$
 */

#include "ompi_config.h"

#include <string.h>

#include "opal/class/opal_list.h"
#include "opal/util/argv.h"
#include "opal/mca/mca.h"
#include "opal/mca/base/base.h"
#include "ompi/mca/topo/topo.h"
#include "ompi/mca/topo/base/base.h"
#include "orte/util/output.h"
#include "ompi/communicator/communicator.h"


/*
 * Local functions
 */
static void fill_null_pointers(mca_topo_base_module_t *module);


/*
 * This structure is needed so that we can close the modules 
 * which are not selected but were opened. mca_base_modules_close
 * which does this job for us requires a opal_list_t which contains
 * these modules
 */
struct queried_module_t {
    opal_list_item_t super;
    mca_topo_base_component_t *om_component;
    mca_topo_base_module_t *om_module;
};
typedef struct queried_module_t queried_module_t;
static OBJ_CLASS_INSTANCE(queried_module_t, opal_list_item_t, NULL, NULL);


/*
 * Only one topo module can be attached to each communicator.
 *
 * This module calls the query funtion on all the components that were
 * detected by topo_base_open. This function is called on a
 * per-communicator basis. This function has the following function.
 *
 * 1. Iterate over the list of available_components
 * 2. Call the query function on each of these components.
 * 3. query function returns the structure containing pointers
 *    to its module and its priority
 * 4. Select the module with the highest priority
 * 5. Call the init function on the selected module so that it does the
 *    right setup for the communicator
 * 6. Call finalize on all the other modules which returned 
 *    their module but were unfortunate to not get selected
 */  

int mca_topo_base_comm_select (struct ompi_communicator_t *comm,
                               struct mca_base_component_t *preferred) 
{
    int priority; 
    int best_priority; 
    char name[MPI_MAX_OBJECT_NAME+32];
    opal_list_item_t *item; 
    opal_list_item_t *next_item; 
    mca_base_component_priority_list_item_t *selectable_item;
    char *names, **name_array;
    int num_names;
    mca_base_component_priority_list_item_t *cpli;
    mca_topo_base_component_t *component; 
    mca_topo_base_component_t *best_component;
    mca_topo_base_module_t *module; 
    opal_list_t queried;
    queried_module_t *om;
    opal_list_t *selectable;
    char *str;
    int err = MPI_SUCCESS;
    int i;
    bool was_selectable_constructed = false;

    /* Announce */

    /* ANJU:
     * check for names array .... mca_base_param_ */
  
    snprintf(name, sizeof(name), "%s (cid %d)", comm->c_name,
               comm->c_contextid);
    name[sizeof(name) - 1] = '\0';
    orte_output_verbose(10, mca_topo_base_output,
                        "topo:base:comm_select: new communicator: %s",
                        name);


    /* Check and see if a preferred component was provided. If it was
     provided then it should be used (if possible) */

    if (NULL != preferred) {
         
        /* We have a preferred component. Check if it is available
           and if so, whether it wants to run */
         
         str = &(preferred->mca_component_name[0]);
         
         orte_output_verbose(10, mca_topo_base_output,
                             "topo:base:comm_select: Checking preferred component: %s",
                             str);

         /* query the component for its priority and get its module 
            structure. This is necessary to proceed */

        component = (mca_topo_base_component_t *)preferred;
         module = component->topom_comm_query (&priority);
         if (NULL != module && 
             NULL != module->topo_module_init &&
             NULL != module->topo_graph_map &&
             NULL != module->topo_cart_map) {

             /* this query seems to have returned something legitimate
              * and we can now go ahead and initialize the
              * communicator with it * but first, the functions which
              * are null need to be filled in */

             fill_null_pointers (module);
             comm->c_topo = module;
             comm->c_topo_component = preferred;

             return module->topo_module_init(comm);
         } 
            /* His preferred component is present, but is unable to
             * run. This is not a good sign. We should try selecting
             * some other component We let it fall through and select
             * from the list of available components
             */
     } /*end of selection for preferred component */

    /*
     * We fall till here if one of the two things happened:
     * 1. The preferred component was provided but for some reason was
     * not able to be selected
     * 2. No preferred component was provided
     *
     * All we need to do is to go through the list of available
     * components and find the one which has the highest priority and
     * use that for this communicator
     */ 

    /* Check if anything was requested by means on the name parameters */
    names = NULL;
    mca_base_param_lookup_string (mca_topo_base_param, &names);

    if (NULL != names && 0 < strlen(names)) {
        name_array = opal_argv_split (names, ',');
        num_names = opal_argv_count (name_array);

        orte_output_verbose(10, mca_topo_base_output,
                            "topo:base:comm_Select: Checking all available module");

        /* since there are somethings which the mca requested through the 
           if the intersection is NULL, then we barf saying that the requested
           modules are not being available */

        selectable = OBJ_NEW(opal_list_t);
        was_selectable_constructed = true;
        
        /* go through the compoents_available list and check against the names
         * to see whether this can be added or not */

        for (item = opal_list_get_first(&mca_topo_base_components_available);
            item != opal_list_get_end(&mca_topo_base_components_available);
            item = opal_list_get_next(item)) {
            /* convert the opal_list_item_t returned into the proper type */
            cpli = (mca_base_component_priority_list_item_t *) item;
            component = (mca_topo_base_component_t *) cpli->super.cli_component;
            orte_output_verbose(10, mca_topo_base_output,
                                "select: initialising %s component %s",
                                component->topom_version.mca_type_name,
                                component->topom_version.mca_component_name);

            /* check if this name is present in the mca_base_params */
            for (i=0; i < num_names; i++) {
                if (0 == strcmp(name_array[i], component->topom_version.mca_component_name)) {
                    /* this is present, and should be added o the selectable list */

                    /* We need to create a seperate object to initialise this list with
                     * since we cannot have the same item in 2 lists */

                    selectable_item = OBJ_NEW (mca_base_component_priority_list_item_t);
                    *selectable_item = *cpli;
                    opal_list_append (selectable, (opal_list_item_t *)selectable_item);
                    break;
                }
            }
        }
        
        /* check for a NULL intersection between the available list and the 
         * list which was asked for */

        if (0 == opal_list_get_size(selectable)) {
            was_selectable_constructed = true;
            OBJ_RELEASE (selectable);
            orte_output_verbose (10, mca_topo_base_output,
                                 "topo:base:comm_select: preferred modules were not available");
            return OMPI_ERROR;
        }
    } else { /* if there was no name_array, then we need to simply initialize 
                selectable to mca_topo_base_components_available */
        selectable = &mca_topo_base_components_available;
    }

    best_component = NULL;
    best_priority = -1;
    OBJ_CONSTRUCT(&queried, opal_list_t);

    for (item = opal_list_get_first(selectable);
         item != opal_list_get_end(selectable);
         item = opal_list_get_next(item)) {
       /*
        * convert the opal_list_item_t returned into the proper type
        */
       cpli = (mca_base_component_priority_list_item_t *) item;
       component = (mca_topo_base_component_t *) cpli->super.cli_component;
       orte_output_verbose(10, mca_topo_base_output,
                           "select: initialising %s component %s",
                           component->topom_version.mca_type_name,
                           component->topom_version.mca_component_name);

       /*
        * we can call the query function only if there is a function :-)
        */
       if (NULL == component->topom_comm_query) {
          orte_output_verbose(10, mca_topo_base_output,
                             "select: no query, ignoring the component");
       } else {
           /*
            * call the query function and see what it returns
            */ 
           module = component->topom_comm_query (&priority);

           if (NULL == module ||
               NULL == module->topo_module_init ||
               NULL == module->topo_graph_map  ||
               NULL == module->topo_cart_map) {
               /*
                * query did not return any action which can be used
                */ 
               orte_output_verbose(10, mca_topo_base_output,
                                  "select: query returned failure");
           } else {
               orte_output_verbose(10, mca_topo_base_output,
                                  "select: query returned priority %d",
                                  priority);
               /* 
                * is this the best component we have found till now?
                */
               if (priority > best_priority) {
                   best_priority = priority;
                   best_component = component;
               }

               om = OBJ_NEW(queried_module_t);
               /*
                * check if we have run out of space
                */
               if (NULL == om) {
                   OBJ_DESTRUCT(&queried);
                   return OMPI_ERR_OUT_OF_RESOURCE;
               }
               om->om_component = component;
               om->om_module = module; 
               opal_list_append(&queried, (opal_list_item_t *)om); 
           } /* end else of if (NULL == module) */
       } /* end else of if (NULL == component->topom_init) */
    } /* end for ... end of traversal */

    /* We have to remove empty out the selectable list if the selectable 
     * list was constructed as a duplicate and not as a pointer to the
     * mca_base_components_available list. So, check and destroy */

    if (was_selectable_constructed) {

        /* remove all the items first */
        for (item = opal_list_get_first(&mca_topo_base_components_available);
             item != opal_list_get_end(&mca_topo_base_components_available);
             item = next_item) {
             next_item = opal_list_get_next(item);
             OBJ_RELEASE (item);
        }
                
        /* release the list itself */
        OBJ_RELEASE (selectable);
        was_selectable_constructed = false;
    }

    /*
     * Now we have alist of components which successfully returned
     * their module struct.  One of these components has the best
     * priority. The rest have to be comm_unqueried to counter the
     * effects of comm_query'ing them. Finalize happens only on
     * components which should are initialized.
     */
    if (NULL == best_component) {
       /*
        * This typically means that there was no component which was
        * able to run properly this time. So, we need to abort
        * JMS replace with show_help
        */
        OBJ_DESTRUCT(&queried);
        return OMPI_ERROR;
    }

    /*
     * We now have a list of components which have successfully
     * returned their priorities from the query. We now have to
     * unquery() those components which have not been selected and
     * init() the component which was selected
     */ 
    for (item = opal_list_remove_first(&queried);
         NULL != item;
         item = opal_list_remove_first(&queried)) {
        om = (queried_module_t *) item;
        if (om->om_component == best_component) {
           /*
            * this is the chosen component, we have to initialise the
            * module of this component.
            *
            * ANJU: a component might not have all the functions
            * defined.  Whereever a function pointer is null in the
            * module structure we need to fill it in with the base
            * structure function pointers. This is yet to be done
            */ 

            /*
             * We don return here coz we still need to go through and
             * elease the other objects
             */

            fill_null_pointers (om->om_module);
            comm->c_topo = om->om_module;
            err = om->om_module->topo_module_init(comm);
            comm->c_topo_component = (mca_base_component_t *)best_component;

         } else {
            /*
             * this is not the "choosen one", finalize
             */
             if (NULL != om->om_component->topom_comm_unquery) {
                /* unquery the component only if they have some clean
                 * up job to do. Components which are queried but do
                 * not actually do anything typically do not have a
                 * unquery. Hence this check is necessary
                 */
                 (void) om->om_component->topom_comm_unquery(comm);
                 orte_output_verbose(10, mca_topo_base_output,
                                     "select: component %s is not selected",
                                     om->om_component->topom_version.mca_component_name);
               } /* end if */
          } /* if not best component */
          OBJ_RELEASE(om);
    } /* traversing through the entire list */
    
    orte_output_verbose(10, mca_topo_base_output,
                       "select: component %s selected",
                        best_component->topom_version.mca_component_name);

    OBJ_DESTRUCT(&queried);

    return err;
}


/*
 * This function fills in the null function pointers, in other words,
 * those functions which are not implemented by the module with the
 * pointers from the base function. Somewhere, I need to incoroporate
 * a check for the common minimum funtions being implemented by the
 * module atleast. If not, this module cannot be considered.
 */ 
static void fill_null_pointers(mca_topo_base_module_t *module) 
{
#define CHECK_FOR_NULL_FUNCTION_POINTER(name) \
   if (NULL == module->topo_##name) { \
      module->topo_##name = mca_topo_base_##name; \
   }

   CHECK_FOR_NULL_FUNCTION_POINTER(cart_coords);
   CHECK_FOR_NULL_FUNCTION_POINTER(cart_create); 
   CHECK_FOR_NULL_FUNCTION_POINTER(cart_get);
   CHECK_FOR_NULL_FUNCTION_POINTER(cartdim_get);
   CHECK_FOR_NULL_FUNCTION_POINTER(cart_rank);
   CHECK_FOR_NULL_FUNCTION_POINTER(cart_shift);
   CHECK_FOR_NULL_FUNCTION_POINTER(cart_sub);
   CHECK_FOR_NULL_FUNCTION_POINTER(graph_create); 
   CHECK_FOR_NULL_FUNCTION_POINTER(graph_get);
   CHECK_FOR_NULL_FUNCTION_POINTER(graphdims_get);
   CHECK_FOR_NULL_FUNCTION_POINTER(graph_neighbors);
   CHECK_FOR_NULL_FUNCTION_POINTER(graph_neighbors_count);

#undef CHECK_FOR_NULL_FUNCTION_POINTER
}