openmpi/config/ompi_ext.m4

dnl -*- shell-script -*-
dnl
dnl Copyright (c) 2004-2009 The Trustees of Indiana University and Indiana
dnl                         University Research and Technology
dnl                         Corporation.  All rights reserved.
dnl Copyright (c) 2009-2015 Cisco Systems, Inc.  All rights reserved.
dnl Copyright (c) 2011-2012 Oak Ridge National Labs.  All rights reserved.
dnl Copyright (c) 2015      Research Organization for Information Science
dnl                         and Technology (RIST). All rights reserved.
dnl $COPYRIGHT$
dnl
dnl Additional copyrights may follow
dnl
dnl $HEADER$
dnl

######################################################################
#
# OMPI_EXT
#
# configure the Interface Extensions [similar to MCA version].  Works hand in
# hand with Open MPI's autogen.pl, requiring it's specially formatted lists
# of frameworks, components, etc.
#
# USAGE:
#   OMPI_EXT()
#
######################################################################
AC_DEFUN([OMPI_EXT],[
    dnl for OPAL_CONFIGURE_USER env variable
    AC_REQUIRE([OPAL_CONFIGURE_SETUP])

    # Note that we do not build DSO's here -- we *only* build convenience
    # libraries that get slurped into higher-level libraries
    #
    # [default -- no option given] = No extensions built
    # --enable-mpi-ext=[,]*EXTENSION[,]*
    #
    AC_ARG_ENABLE(mpi-ext,
        AC_HELP_STRING([--enable-mpi-ext[=LIST]],
                       [Comma-separated list of extensions that should be built.  Possible values: ompi_mpiext_list.  Example: "--enable-mpi-ext=foo,bar" will enable building the MPI extensions "foo" and "bar".  If LIST is empty or the special value "all", then all available MPI extensions will be built (default: all).]))

    # print some nice messages about what we're about to do...
    AC_MSG_CHECKING([for available MPI Extensions])
    AC_MSG_RESULT([ompi_mpiext_list])

    AC_MSG_CHECKING([which MPI extension should be enabled])
    if test "$enable_mpi_ext" = "" || \
       test "$enable_mpi_ext" = "yes" || \
       test "$enable_mpi_ext" = "all"; then
        enable_mpi_ext=all
        msg="All Available Extensions"
        str="`echo ENABLE_EXT_ALL=1`"
        eval $str
    else
        ifs_save="$IFS"
        IFS="${IFS}$PATH_SEPARATOR,"
        msg=
        for item in $enable_mpi_ext; do
            type="`echo $item | cut -s -f1 -d-`"
            if test -z $type ; then
                type=$item
            fi
            str="`echo ENABLE_${type}=1 | sed s/-/_/g`"
            eval $str
            msg="$item $msg"
        done
        IFS="$ifs_save"
    fi
    AC_MSG_RESULT([$msg])
    unset msg

    m4_ifdef([ompi_mpiext_list], [],
             [m4_fatal([Could not find MPI Extensions list.  Aborting.])])

    EXT_CONFIGURE
])


######################################################################
#
# EXT_CONFIGURE
#
# USAGE:
#   EXT_CONFIGURE()
#
######################################################################
AC_DEFUN([EXT_CONFIGURE],[
    outdir=ompi/include

    # first create the output include directory
    mkdir -p $outdir

    ###############
    # C Bindings
    ###############

    # remove any previously generated #include files
    mpi_ext_h=$outdir/mpi-ext.h
    rm -f $mpi_ext_h

    # Create the final mpi-ext.h file.
    cat > $mpi_ext_h <<EOF
/*
 * \$HEADER\$
 */

#ifndef OMPI_MPI_EXT_H
#define OMPI_MPI_EXT_H 1

#if defined(c_plusplus) || defined(__cplusplus)
extern "C" {
#endif

#define OMPI_HAVE_MPI_EXT 1

EOF

    ###############
    # mpif.h Bindings
    ###############

    # remove any previously generated #include files
    mpif_ext_h=$outdir/mpif-ext.h
    rm -f $mpif_ext_h

    # Create the final mpif-ext.h file.
    cat > $mpif_ext_h <<EOF
! -*- fortran -*-
! \$HEADER\$
!
! *** THIS FILE IS AUTOMATICALLY GENERATED!
! *** Any manual edits will be lost!
!
      integer OMPI_HAVE_MPI_EXT
      parameter (OMPI_HAVE_MPI_EXT=1)
!
EOF

    ###############
    # "use mpi" Bindings
    ###############

    # Although Fortran module files are essentially compiled header
    # files, we don't create them in ompi/include, like we do for
    # mpi.h and mpif.h.  Instead, we build them down in ompi/fortran,
    # when we build the rest of the Fortran modules.  Indeed, in the
    # "use mpi" case, it needs some of the same internal modules that
    # the mpi_f08 module itself needs.  So the mpi_f08_ext module has
    # to be built *after* the mpi_f08 module (so that all the internal
    # modules it needs are already built).

    # remove any previously generated #include files
    outdir=ompi/mpi/fortran/mpiext
    mkdir -p $outdir
    mpiusempi_ext_h=$outdir/mpi-ext-module.F90
    rm -f $mpiusempi_ext_h

    # Create the final mpiusempi-ext.h file.
    cat > $mpiusempi_ext_h <<EOF
! -*- fortran -*-
! \$HEADER\$
!
! *** THIS FILE IS AUTOMATICALLY GENERATED!
! *** Any manual edits will be lost!
!
module mpi_ext
!     Even though this is not a useful parameter (cannot be used as a
!     preprocessor catch) define it to keep the linker from complaining
!     during the build.
      integer OMPI_HAVE_MPI_EXT
      parameter (OMPI_HAVE_MPI_EXT=1)
!
EOF

    # Make an AM conditional to see whether we're building the mpi_ext
    # module.  Note that we only build it if we support the ignore-tkr
    # mpi module.
    AS_IF([test $OMPI_BUILD_FORTRAN_BINDINGS -ge $OMPI_FORTRAN_USEMPI_BINDINGS && \
           test $OMPI_FORTRAN_HAVE_IGNORE_TKR -eq 1],
          [OMPI_BUILD_FORTRAN_USEMPI_EXT=1],
          [OMPI_BUILD_FORTRAN_USEMPI_EXT=0])
    AM_CONDITIONAL(OMPI_BUILD_FORTRAN_USEMPI_EXT,
                   [test $OMPI_BUILD_FORTRAN_USEMPI_EXT -eq 1])

    ###############
    # "use mpi_f08" Bindings
    ###############

    # See note above: we generate the mpi_f08_ext module in
    # ompi/mpi/fortran/mpiext

    # remove any previously generated #include files
    mpiusempif08_ext_h=$outdir/mpi-f08-ext-module.F90
    rm -f $mpiusempif08_ext_h

    # Create the final mpiusempi-ext.h file.
    cat > $mpiusempif08_ext_h <<EOF
! -*- fortran -*-
! \$HEADER\$
!
! *** THIS FILE IS AUTOMATICALLY GENERATED!
! *** Any manual edits will be lost!
!
module mpi_f08_ext
!     Even though this is not a useful parameter (cannot be used as a
!     preprocessor catch) define it to keep the linker from complaining
!     during the build.
      integer OMPI_HAVE_MPI_EXT
      parameter (OMPI_HAVE_MPI_EXT=1)
!
EOF

    # Only build this mpi_f08_ext module if we're building the "use
    # mpi_f08" module *and* it's the non-descriptor one.
    AS_IF([test $OMPI_BUILD_FORTRAN_BINDINGS -ge $OMPI_FORTRAN_USEMPIF08_BINDINGS && \
           test $OMPI_BUILD_FORTRAN_F08_SUBARRAYS -eq 0],
          [OMPI_BUILD_FORTRAN_USEMPIF08_EXT=1],
          [OMPI_BUILD_FORTRAN_USEMPIF08_EXT=0])
    AM_CONDITIONAL(OMPI_BUILD_FORTRAN_USEMPIF08_EXT,
                   [test $OMPI_BUILD_FORTRAN_USEMPIF08_EXT -eq 1])

    # Make an AM conditional to see whether we're building either the
    # mpi_ext or mpi_f08_Ext modules.
    AM_CONDITIONAL(OMPI_BUILD_FORTRAN_USEMPI_OR_USEMPIF08_EXT,
                   [test $OMPI_BUILD_FORTRAN_USEMPI_EXT -eq 1 || \
                    test $OMPI_BUILD_FORTRAN_USEMPIF08_EXT -eq 1])

    #
    # Process each component
    #

    # remove any previously generated #include files
    outfile_real=ompi/mpiext/static-components.h
    outfile=$outfile_real.new
    rm -f $outfile $outfile.struct $outfile.extern
    $MKDIR_P ompi/mpiext
    touch $outfile.struct $outfile.extern

    m4_foreach(extension, [ompi_mpiext_list],
               [m4_ifval(extension,
               [EXT_CONFIGURE_M4_CONFIG_COMPONENT(extension,
                                                  [OMPI_MPIEXT_ALL],
                                                  [OMPI_MPIEXT_C],
                                                  [OMPI_MPIEXT_MPIFH],
                                                  [OMPI_MPIEXT_USEMPI],
                                                  [OMPI_MPIEXT_USEMPIF08])])])

    ###############
    # C Bindings
    ###############
    # Create the final mpi-ext.h file.
    cat >> $mpi_ext_h <<EOF

#if defined(c_plusplus) || defined(__cplusplus)
}
#endif

#endif /* OMPI_MPI_EXT_H */

EOF

    ###############
    # mpif.h Bindings
    ###############
    # Create the final mpif-ext.h file.
    cat >> $mpif_ext_h <<EOF
!
EOF

    ###############
    # "use mpi" Bindings
    ###############
    # Create the final mpiusempi-ext.h file.
    cat >> $mpiusempi_ext_h <<EOF
!
end module mpi_ext
EOF

    ###############
    # "use mpi_f08" Bindings
    ###############
    # Create the final mpiusempi-ext.h file.
    cat >> $mpiusempif08_ext_h <<EOF
!
end module mpi_f08_ext
EOF

    # Create the final .h file that will be included in the type's
    # top-level glue.  This lists all the static components.  We don't
    # need to do this for "common".
    if test "$2" != "common"; then
        cat > $outfile <<EOF
/*
 * \$HEADER\$
 */
#if defined(c_plusplus) || defined(__cplusplus)
extern "C" {
#endif

`cat $outfile.extern`

const ompi_mpiext_component_t *ompi_mpiext_components[[]] = {
`cat $outfile.struct`
  NULL
};

#if defined(c_plusplus) || defined(__cplusplus)
}
#endif

EOF
        # Only replace the header file if a) it doesn't previously
        # exist, or b) the contents are different.  Do this to not
        # trigger recompilation of certain .c files just because the
        # timestamp changed on $outfile_real (similar to the way AC
        # handles AC_CONFIG_HEADER files).
        diff $outfile $outfile_real > /dev/null 2>&1
        if test "$?" != "0"; then
            mv $outfile $outfile_real
        else
            rm -f $outfile
        fi
    fi
    rm -f $outfile.struct $outfile.extern

    # We have all the results we need.  Now put them in various
    # variables/defines so that others can see the results.

    OMPI_EXT_MAKE_DIR_LIST(OMPI_MPIEXT_ALL_SUBDIRS, $OMPI_MPIEXT_ALL)

    OMPI_EXT_MAKE_LISTS(OMPI_MPIEXT_C, $OMPI_MPIEXT_C, c, c)
    OMPI_EXT_MAKE_LISTS(OMPI_MPIEXT_MPIFH, $OMPI_MPIEXT_MPIFH, mpif-h, mpifh)
    OMPI_EXT_MAKE_LISTS(OMPI_MPIEXT_USEMPI, $OMPI_MPIEXT_USEMPI, use-mpi, usempi)
    OMPI_EXT_MAKE_LISTS(OMPI_MPIEXT_USEMPIF08, $OMPI_MPIEXT_USEMPIF08, use-mpi-f08, usempif08)

    comps=`echo $OMPI_MPIEXT_C | sed -e 's/^[ \t]*//;s/[ \t]*$//;s/ /, /g'`
    AC_DEFINE_UNQUOTED([OMPI_MPIEXT_COMPONENTS], ["$comps"],
                       [MPI Extensions included in libmpi])
])


######################################################################
#
# EXT_CONFIGURE_M4_CONFIG_COMPONENT
#
#
# USAGE:
#   EXT_CONFIGURE_M4_CONFIG_COMPONENT((1) component_name,
#                                     (2) all_components_variable,
#                                     (3) c_components_variable,
#                                     (4) mpifh_components_variable,
#                                     (5) usempi_components_variable,
#                                     (6) usempif08_components_variable)
#
# - component_name is a single, naked string (no prefix)
# - all others are naked component names (e.g., "example").  If an
#   extension is named in that variable, it means that that extension
#   has bindings of that flavor.
#
######################################################################
AC_DEFUN([EXT_CONFIGURE_M4_CONFIG_COMPONENT],[
    opal_show_subsubsubtitle "MPI Extension $1"

    EXT_COMPONENT_BUILD_CHECK($1, [should_build=1], [should_build=0])

    # try to configure the component
    m4_ifdef([OMPI_MPIEXT_$1_CONFIG], [],
             [m4_fatal([Could not find OMPI_MPIEXT_]$1[_CONFIG macro for ]$1[ component])])

    OMPI_MPIEXT_$1_CONFIG([should_build=${should_build}], [should_build=0])

    AS_IF([test $should_build -eq 1],
          [EXT_PROCESS_COMPONENT([$1], [$2], [$3], [$4], [$5], [$6])],
          [EXT_PROCESS_DEAD_COMPONENT([$1], [$2])])
])

######################################################################
#
# EXT_PROCESS_COMPONENT
#
# does all setup work for given component.  It should be known before
# calling that this component can build properly (and exists)
#
# USAGE:
#   EXT_CONFIGURE_ALL_CONFIG_COMPONENTS((1) component_name
#                                       (2) all_components_variable,
#                                       (3) c_components_variable,
#                                       (4) mpifh_components_variable,
#                                       (5) usempi_components_variable,
#                                       (6) usempif08_components_variable)
#
# C bindings are mandatory.  Other bindings are optional / built if
# they are found.  Here's the files that the m4 expects:
#
#--------------------
#
# C:
# - c/mpiext_<component>_c.h: is included in mpi_ext.h
# - c/libmpiext_<component>.la: convneience library slurped into libmpi.la
#
# mpi.f.h:
# - mpif-h/mpiext_<component>_mpifh.h: is included mpi mpif_ext.h
# - mpif-h/libmpiext_<component>_mpifh.la: convenience library slurped
#   into libmpi_mpifh.la
#
# If the ..._mpifh.h file exists, it is assumed that "make all" will
# build the .la file.  And therefore we'll include full support for
# the mpif.h bindings for this extension in OMPI.
#
#--------------------
#
# use mpi:
# - use-mpi/mpiext_<component>_usempi.h: included in the mpi_ext module
#
# Only supported when the ignore-tkr mpi module is built (this
# currently means: when you don't use gfortran).
#
# If the ..._usempi.h file exists, it is assumed that we'll include
# full support for the mpi_ext bindings for this extension in OMPI.
#
# NO LIBRARY IS SUPPORTED FOR THE mpi MODULE BINDINGS!  It is assumed
# that all required symbols will be in the
# libmpiext_<component>_mpifh.la library, and all that this set of
# bindings does it give strong type checking to those subroutines.
#
#--------------------
#
# use mpi_f08:
# - use-mpi-f08/mpiext_<component>_usempif08.h: included in the mpi_ext module
# - use-mpi-f08/libmpiext_<component>_usempif08.la: convenience
#   library slurped into libmpi_usempif08.la
#
# Only supported when the non-descriptor-based mpi_f08 module is built
# (this currently means: when you don't use gfortran).
#
# If the ..._usempif08.h file exists, it is assumed that "make all"
# will build the .la file.  And therefore we'll include full support
# for the mpi_f08 bindings for this extension in OMPI.
#
######################################################################
AC_DEFUN([EXT_PROCESS_COMPONENT],[
    component=$1

    # Output pretty results
    AC_MSG_CHECKING([if MPI Extension $component can compile])
    AC_MSG_RESULT([yes])

    tmp[=]m4_translit([$1],[a-z],[A-Z])
    component_define="OMPI_HAVE_MPI_EXT_${tmp}"

    ###############
    # C Bindings
    ###############
    test_header="${srcdir}/ompi/mpiext/$component/c/mpiext_${component}_c.h"

    AC_MSG_CHECKING([if MPI Extension $component has C bindings])

    AS_IF([test ! -e "$test_header" && test ! -e "$test_header.in"],
          [ # There *must* be C bindings
           AC_MSG_RESULT([no])
           AC_MSG_WARN([C bindings for MPI extensions are required])
           AC_MSG_ERROR([Cannot continue])])

    AC_MSG_RESULT([yes (required)])

    # Save the list of headers and convenience libraries that this
    # component will output
    $2="$$2 $component"
    $3="$$3 $component"

    # JMS Where is this needed?
    EXT_C_HEADERS="$EXT_C_HEADERS mpiext/$component/c/mpiext_${component}_c.h"

    component_header="mpiext_${component}_c.h"

    cat >> $mpi_ext_h <<EOF
/* Enabled Extension: $component */
#define $component_define 1
#include "openmpi/ompi/mpiext/$component/c/$component_header"

EOF

    ###############
    # mpif.h bindings
    ###############
    #
    # Test if this extension has mpif.h bindings
    # If not, skip this step.
    #
    test_header="${srcdir}/ompi/mpiext/$component/mpif-h/mpiext_${component}_mpifh.h"
    enabled_mpifh=0

    AC_MSG_CHECKING([if MPI Extension $component has mpif.h bindings])

    if test -e "$test_header" ; then
        AC_MSG_RESULT([yes])
        enabled_mpifh=1

    # JMS Where is this needed?
        EXT_MPIFH_HEADERS="$EXT_MPIFH_HEADERS mpiext/$component/mpif-h/mpiext_${component}_mpifh.h"
        $4="$$4 $component"

        component_header="mpiext_${component}_mpifh.h"

        cat >> $mpif_ext_h <<EOF
!
!     Enabled Extension: $component
!
      integer $component_define
      parameter ($component_define=1)

      include 'openmpi/ompi/mpiext/$component/mpif-h/$component_header'

EOF
    else
        AC_MSG_RESULT([no])

        cat >> $mpif_ext_h <<EOF
!
!     Enabled Extension: $component
!     No mpif.h bindings available
!
      integer $component_define
      parameter ($component_define=0)

EOF
    fi

    ###############
    # "use mpi" bindings
    ###############
    #
    # Test if this extension has "use mpi" bindings
    # If not, skip this step.
    #
    test_header="${srcdir}/ompi/mpiext/$component/use-mpi/mpiext_${component}_usempi.h"

    AC_MSG_CHECKING([if MPI Extension $component has "use mpi" bindings])

    if test -e "$test_header" ; then
        AC_MSG_RESULT([yes])

    # JMS Where is this needed?
        EXT_USEMPI_HEADERS="$EXT_USEMPI_HEADERS mpiext/$component/use-mpi/mpiext_${component}_usempi.h"
        $5="$$5 $component"
        component_header="mpiext_${component}_usempi.h"

        cat >> $mpiusempi_ext_h <<EOF
!
!     Enabled Extension: $component
!
EOF
        #
        # Include the mpif.h header if it is available.  Cannot do
        # this from inside the usempi.h since, for VPATH builds, the
        # top_ompi_srcdir is needed to find the header.
        #
        if test "$enabled_mpifh" = 1; then
            mpifh_component_header="mpiext_${component}_mpifh.h"
            cat >> $mpiusempi_ext_h <<EOF
      include '$top_ompi_srcdir/ompi/mpiext/$component/mpif-h/$mpifh_component_header'
EOF
        fi

        cat >> $mpiusempi_ext_h <<EOF
      include '$top_ompi_srcdir/ompi/mpiext/$component/use-mpi/$component_header'

EOF
    else
        AC_MSG_RESULT([no])

        cat >> $mpiusempi_ext_h <<EOF
!
!     Enabled Extension: $component
!     No "use mpi" bindings available
!

EOF
    fi

    ###############
    # "use mpi_f08" bindings
    ###############
    #
    # Test if this extension has "use mpi_f08" bindings
    # If not, skip this step.
    #
    test_header="${srcdir}/ompi/mpiext/$component/use-mpi-f08/mpiext_${component}_usempif08.h"

    AC_MSG_CHECKING([if MPI Extension $component has "use mpi_f08" bindings])

    if test -e "$test_header" ; then
        AC_MSG_RESULT([yes])

    # JMS Where is this needed?
        EXT_USEMPIF08_HEADERS="$EXT_USEMPIF08_HEADERS mpiext/$component/use-mpi-f08/mpiext_${component}_usempif08.h"
        $6="$$6 $component"

        component_header="mpiext_${component}_usempif08.h"

        cat >> $mpiusempif08_ext_h <<EOF
!
!     Enabled Extension: $component
!
EOF
        #
        # Include the mpif.h header if it is available.  Cannot do
        # this from inside the usempif08.h since, for VPATH builds,
        # the top_ompi_srcdir is needed to find the header.
        #
        if test "$enabled_mpifh" = 1; then
            mpifh_component_header="mpiext_${component}_mpifh.h"
            cat >> $mpiusempif08_ext_h <<EOF
      include '$top_ompi_srcdir/ompi/mpiext/$component/mpif-h/$mpifh_component_header'
EOF
        fi

        cat >> $mpiusempif08_ext_h <<EOF
      include '$top_ompi_srcdir/ompi/mpiext/$component/use-mpi-f08/$component_header'

EOF
    else
        AC_MSG_RESULT([no])

        cat >> $mpiusempif08_ext_h <<EOF
!
!     Enabled Extension: $component
!     No "use mpi_f08" bindings available
!

EOF
    fi

    m4_ifdef([OMPI_MPIEXT_]$1[_NEED_INIT],
             [echo "extern const ompi_mpiext_component_t ompi_mpiext_${component};" >> $outfile.extern
              echo "  &ompi_mpiext_${component}, " >> $outfile.struct])

    # now add the flags that were set in the environment variables
    # framework_component_FOO (for example, the flags set by
    # m4_configure components)
    m4_foreach(flags, [LDFLAGS, LIBS],
        [AS_IF([test "$mpiext_$1_WRAPPER_EXTRA_]flags[" = ""],
                [OPAL_FLAGS_APPEND_UNIQ([ompi_mca_wrapper_extra_]m4_tolower(flags), [$mpiext_$1_]flags)],
                [OPAL_FLAGS_APPEND_UNIQ([ompi_mca_wrapper_extra_]m4_tolower(flags), [$mpiext_$1_WRAPPER_EXTRA_]flags)])
        ])

    AS_IF([test "$mpiext_$1_WRAPPER_EXTRA_CPPFLAGS" != ""],
        [OPAL_FLAGS_APPEND_UNIQ([ompi_mca_wrapper_extra_cppflags], [$mpiext_$1_WRAPPER_EXTRA_CPPFLAGS])])
])


######################################################################
#
# EXT_PROCESS_DEAD_COMPONENT
#
# process a component that can not be built.  Do the last minute checks
# to make sure the user isn't doing something stupid.
#
# USAGE:
#   EXT_PROCESS_DEAD_COMPONENT((1) component_name,
#                              (2) all_components_variable)
#
# NOTE: component_name will not be determined until run time.
#
######################################################################
AC_DEFUN([EXT_PROCESS_DEAD_COMPONENT],[
    AC_MSG_CHECKING([if MPI Extension $1 can compile])

    # Need to add this component to the "all" list so that it is
    # included in DIST SUBDIRS
    $2="$$2 $1"

    AC_MSG_RESULT([no])
])



######################################################################
#
# EXT_COMPONENT_BUILD_CHECK
#
# checks the standard rules of component building to see if the
# given component should be built.
#
# USAGE:
#    EXT_COMPONENT_BUILD_CHECK(component,
#                              action-if-build, action-if-not-build)
#
######################################################################
AC_DEFUN([EXT_COMPONENT_BUILD_CHECK],[
    AC_REQUIRE([AC_PROG_GREP])

    component=$1
    component_path="$srcdir/ompi/mpiext/$component"
    want_component=0

    # build if:
    # - the component type is direct and we are that component
    # - there is no ompi_ignore file
    # - there is an ompi_ignore, but there is an empty ompi_unignore
    # - there is an ompi_ignore, but username is in ompi_unignore
    if test -d $component_path ; then
        # decide if we want the component to be built or not.  This
        # is spread out because some of the logic is a little complex
        # and test's syntax isn't exactly the greatest.  We want to
        # build the component by default.
        want_component=1
        if test -f $component_path/.ompi_ignore ; then
            # If there is an ompi_ignore file, don't build
            # the component.  Note that this decision can be
            # overridden by the unignore logic below.
            want_component=0
        fi
        if test -f $component_path/.ompi_unignore ; then
            # if there is an empty ompi_unignore, that is
            # equivalent to having your userid in the unignore file.
            # If userid is in the file, unignore the ignore file.
            if test ! -s $component_path/.ompi_unignore ; then
                want_component=1
            elif test ! -z "`$GREP $OPAL_CONFIGURE_USER $component_path/.ompi_unignore`" ; then
                want_component=1
            fi
        fi
    fi

    # if we asked for everything, then allow it to build if able
    str="ENABLED_COMPONENT_CHECK=\$ENABLE_EXT_ALL"
    eval $str
    if test ! "$ENABLED_COMPONENT_CHECK" = "1" ; then
        # if we were explicitly disabled, don't build :)
        str="ENABLED_COMPONENT_CHECK=\$ENABLE_${component}"
        eval $str
        if test ! "$ENABLED_COMPONENT_CHECK" = "1" ; then
            want_component=0
        fi
    fi

    AS_IF([test "$want_component" = "1"], [$2], [$3])
])


# OMPI_EXT_MAKE_DIR_LIST(subst'ed variable, shell list)
#
# Prefix every extension name with "mpiext/" and AC subst it.
# -------------------------------------------------------------------------
AC_DEFUN([OMPI_EXT_MAKE_DIR_LIST],[
    $1=
    for item in $2 ; do
       $1="$$1 mpiext/$item"
    done
    AC_SUBST($1)
])

# OMPI_EXT_MAKE_LISTS((1) subst'ed variable prefix,
#                     (2) shell list,
#                     (3) bindings dir name,
#                     (4) bindings suffix)
#
# Prefix every extension name with "mpiext/".
# -------------------------------------------------------------------------
AC_DEFUN([OMPI_EXT_MAKE_LISTS],[
    # Make the directory list
    tmp=
    for item in $2 ; do
       tmp="$tmp mpiext/$item/$3"
    done
    $1_DIRS=$tmp
    AC_SUBST($1_DIRS)

    # Make the list of libraries
    tmp=
    for item in $2 ; do
       tmp="$tmp "'$(top_builddir)'"/ompi/mpiext/$item/$3/libmpiext_${item}_$4.la"
    done
    $1_LIBS=$tmp
    AC_SUBST($1_LIBS)
])