openmpi/ompi/runtime/ompi_mpi_init.c

/*
 * Copyright (c) 2004-2007 The Trustees of Indiana University and Indiana
 *                         University Research and Technology
 *                         Corporation.  All rights reserved.
 * Copyright (c) 2004-2005 The University of Tennessee and The University
 *                         of Tennessee Research Foundation.  All rights
 *                         reserved.
 * Copyright (c) 2004-2005 High Performance Computing Center Stuttgart, 
 *                         University of Stuttgart.  All rights reserved.
 * Copyright (c) 2004-2005 The Regents of the University of California.
 *                         All rights reserved.
 * Copyright (c) 2006-2007 Cisco Systems, Inc.  All rights reserved.
 * Copyright (c) 2006-2007 Los Alamos National Security, LLC.  All rights
 *                         reserved. 
 * Copyright (c) 2006      University of Houston. All rights reserved.
 *
 * $COPYRIGHT$
 * 
 * Additional copyrights may follow
 * 
 * $HEADER$
 */

#include "ompi_config.h"

#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif  /* HAVE_SYS_TIME_H */

#include "mpi.h"
#include "opal/class/opal_list.h"
#include "opal/mca/base/base.h"
#include "opal/mca/paffinity/base/base.h"
#include "opal/mca/maffinity/base/base.h"
#include "opal/runtime/opal_progress.h"
#include "opal/threads/threads.h"
#include "opal/util/argv.h"
#include "opal/util/show_help.h"
#include "opal/util/stacktrace.h"
#include "opal/util/num_procs.h"
#include "opal/runtime/opal.h"
#include "opal/event/event.h"

#include "orte/util/proc_info.h"
#include "orte/util/session_dir.h"
#include "orte/util/name_fns.h"
#include "orte/runtime/runtime.h"
#include "orte/mca/rml/rml.h"
#include "orte/mca/errmgr/errmgr.h"
#include "orte/mca/grpcomm/grpcomm.h"
#include "orte/runtime/orte_globals.h"

#include "ompi/constants.h"
#include "ompi/mpi/f77/constants.h"
#include "ompi/runtime/mpiruntime.h"
#include "ompi/runtime/params.h"
#include "ompi/communicator/communicator.h"
#include "ompi/group/group.h"
#include "ompi/info/info.h"
#include "ompi/errhandler/errcode.h"
#include "ompi/request/request.h"
#include "ompi/op/op.h"
#include "ompi/file/file.h"
#include "ompi/attribute/attribute.h"
#include "ompi/mca/allocator/base/base.h"
#include "ompi/mca/allocator/allocator.h"
#include "ompi/mca/rcache/base/base.h"
#include "ompi/mca/rcache/rcache.h"
#include "ompi/mca/mpool/base/base.h"
#include "ompi/mca/mpool/mpool.h"
#include "ompi/mca/pml/pml.h"
#include "ompi/runtime/ompi_module_exchange.h"
#include "ompi/mca/pml/base/base.h"
#include "ompi/mca/osc/base/base.h"
#include "ompi/mca/coll/coll.h"
#include "ompi/mca/coll/base/base.h"
#include "ompi/mca/io/io.h"
#include "ompi/mca/io/base/base.h"
#include "ompi/debuggers/debuggers.h"
#include "ompi/proc/proc.h"
#include "ompi/mca/pml/base/pml_base_bsend.h"
#include "ompi/mca/dpm/base/base.h"
#include "ompi/mca/pubsub/base/base.h"

#if OPAL_ENABLE_FT == 1
#include "ompi/mca/crcp/crcp.h"
#include "ompi/mca/crcp/base/base.h"
#endif
#include "ompi/runtime/ompi_cr.h"

static int slot_list_to_cpu_set(char *slot_str);
#include "orte/runtime/orte_globals.h"
/*
 * Global variables and symbols for the MPI layer
 */

bool ompi_mpi_initialized = false;
bool ompi_mpi_finalized = false;

bool ompi_mpi_thread_multiple = false;
int ompi_mpi_thread_requested = MPI_THREAD_SINGLE;
int ompi_mpi_thread_provided = MPI_THREAD_SINGLE;

opal_thread_t *ompi_mpi_main_thread = NULL;

bool ompi_mpi_maffinity_setup = false;

/*
 * These variables are here, rather than under ompi/mpi/c/foo.c
 * because it is not sufficient to have a .c file that only contains
 * variables -- you must have a function that is invoked from
 * elsewhere in the code to guarantee that all linkers will pull in
 * the .o file from the library.  Hence, although these are MPI
 * constants, we might as well just define them here (i.e., in a file
 * that already has a function that is guaranteed to be linked in,
 * rather than make a new .c file with the constants and a
 * corresponding dummy function that is invoked from this function).
 *
 * Additionally, there can be/are strange linking paths such that
 * ompi_info needs symbols such as ompi_fortran_status_ignore,
 * which, if they weren't here with a collection of other global
 * symbols that are initialized (which seems to force this .o file to
 * be pulled into the resolution process, because ompi_info certainly
 * does not call ompi_mpi_init()), would not be able to be found by
 * the OSX linker.
 *
 * NOTE: See the big comment in ompi/mpi/f77/constants.h about why we
 * have four symbols for each of the common blocks (e.g., the Fortran
 * equivalent(s) of MPI_STATUS_IGNORE).  Here, we can only have *one*
 * value (not four).  So the only thing we can do is make it equal to
 * the fortran compiler convention that was selected at configure
 * time.  Note that this is also true for the value of .TRUE. from the
 * Fortran compiler, so even though Open MPI supports all four Fortran
 * symbol conventions, it can only support one convention for the two
 * C constants (MPI_FORTRAN_STATUS[ES]_IGNORE) and only support one
 * compiler for the value of .TRUE.  Ugh!!
 *
 * Note that the casts here are ok -- we're *only* comparing pointer
 * values (i.e., they'll never be de-referenced).  The global symbols
 * are actually of type (ompi_fortran_common_t) (for alignment
 * issues), but MPI says that MPI_F_STATUS[ES]_IGNORE must be of type
 * (MPI_Fint*).  Hence, we have to cast to make compilers not
 * complain.
 */
#if OMPI_WANT_F77_BINDINGS
#  if OMPI_F77_CAPS
MPI_Fint *MPI_F_STATUS_IGNORE = (MPI_Fint*) &MPI_FORTRAN_STATUS_IGNORE;
MPI_Fint *MPI_F_STATUSES_IGNORE = (MPI_Fint*) &MPI_FORTRAN_STATUSES_IGNORE;
#  elif OMPI_F77_PLAIN
MPI_Fint *MPI_F_STATUS_IGNORE = (MPI_Fint*) &mpi_fortran_status_ignore;
MPI_Fint *MPI_F_STATUSES_IGNORE = (MPI_Fint*) &mpi_fortran_statuses_ignore;
#  elif OMPI_F77_SINGLE_UNDERSCORE
MPI_Fint *MPI_F_STATUS_IGNORE = (MPI_Fint*) &mpi_fortran_status_ignore_;
MPI_Fint *MPI_F_STATUSES_IGNORE = (MPI_Fint*) &mpi_fortran_statuses_ignore_;
#  elif OMPI_F77_DOUBLE_UNDERSCORE
MPI_Fint *MPI_F_STATUS_IGNORE = (MPI_Fint*) &mpi_fortran_status_ignore__;
MPI_Fint *MPI_F_STATUSES_IGNORE = (MPI_Fint*) &mpi_fortran_statuses_ignore__;
#  else
#    error Unrecognized Fortran 77 name mangling scheme
#  endif
#else
MPI_Fint *MPI_F_STATUS_IGNORE = NULL;
MPI_Fint *MPI_F_STATUSES_IGNORE = NULL;
#endif  /* OMPI_WANT_F77_BINDINGS */


/* Constants for the Fortran layer.  These values are referred to via
   common blocks in the Fortran equivalents.  See
   ompi/mpi/f77/constants.h for a more detailed explanation.

   The values are *NOT* initialized.  We do not use the values of
   these constants; only their addresses (because they're always
   passed by reference by Fortran).  

   Initializing upon instantiation these can reveal size and/or
   alignment differences between Fortran and C (!) which can cause
   warnings or errors upon linking (e.g., making static libraries with
   the intel 9.0 compilers on 64 bit platforms shows alignment
   differences between libmpi.a and the user's application, resulting
   in a linker warning).  FWIW, if you initialize these variables in
   functions (i.e., not at the instantiation in the global scope), the
   linker somehow "figures it all out" (w.r.t. different alignments
   between fortan common blocks and the corresponding C variables) and
   no linker warnings occur.

   Note that the rationale for the types of each of these variables is
   discussed in ompi/include/mpif-common.h.  Do not change the types
   without also modifying ompi/mpi/f77/constants.h and
   ompi/include/mpif-common.h.
 */

#define INST(type, upper_case, lower_case, single_u, double_u)   \
type lower_case; \
type upper_case; \
type single_u;  \
type double_u

INST(int, MPI_FORTRAN_BOTTOM, mpi_fortran_bottom,
     mpi_fortran_bottom_, mpi_fortran_bottom__);
INST(int, MPI_FORTRAN_IN_PLACE, mpi_fortran_in_place,
     mpi_fortran_in_place_, mpi_fortran_in_place__);
INST(char *, MPI_FORTRAN_ARGV_NULL, mpi_fortran_argv_null,
     mpi_fortran_argv_null_, mpi_fortran_argv_null__);
INST(double, MPI_FORTRAN_ARGVS_NULL, mpi_fortran_argvs_null,
     mpi_fortran_argvs_null_, mpi_fortran_argvs_null__);
INST(int *, MPI_FORTRAN_ERRCODES_IGNORE, mpi_fortran_errcodes_ignore,
     mpi_fortran_errcodes_ignore_, mpi_fortran_errcodes_ignore__);
INST(int *, MPI_FORTRAN_STATUS_IGNORE, mpi_fortran_status_ignore,
     mpi_fortran_status_ignore_, mpi_fortran_status_ignore__);
INST (double, MPI_FORTRAN_STATUSES_IGNORE, mpi_fortran_statuses_ignore,
      mpi_fortran_statuses_ignore_, mpi_fortran_statuses_ignore__);

/*
 * Per MPI-2:9.5.3, MPI_REGISTER_DATAREP is a memory leak.  There is
 * no way to *de*register datareps once they've been registered.  So
 * we have to track all registrations here so that they can be
 * de-registered during MPI_FINALIZE so that memory-tracking debuggers
 * don't show Open MPI as leaking memory.
 */
opal_list_t ompi_registered_datareps;


int ompi_mpi_init(int argc, char **argv, int requested, int *provided)
{
    int ret;
    ompi_proc_t** procs;
    size_t nprocs;
    char *error = NULL;
    bool timing = false;
    int param, value;
    struct timeval ompistart, ompistop;
    char *slot_list = NULL;
#if 0
    /* see comment below about sched_yield */
    int num_processors;
#endif
    
    /* Join the run-time environment - do the things that don't hit
       the registry */

    if (ORTE_SUCCESS != (ret = opal_init())) {
        error = "ompi_mpi_init: opal_init failed";
        goto error;
    }

    /* check to see if we want timing information */
    param = mca_base_param_reg_int_name("ompi", "timing",
                                        "Request that critical timing loops be measured",
                                        false, false, 0, &value);
    if (value != 0) {
        timing = true;
        gettimeofday(&ompistart, NULL);
    }
    
    /* Setup ORTE stage 1, note that we are not infrastructre  */
    
    if (ORTE_SUCCESS != (ret = orte_init(ORTE_NON_TOOL))) {
        error = "ompi_mpi_init: orte_init failed";
        goto error;
    }
    
    /* check for timing request - get stop time and report elapsed time if so */
    if (timing) {
        gettimeofday(&ompistop, NULL);
        opal_output(0, "ompi_mpi_init [%ld]: time from start to completion of orte_init %ld usec",
                    (long)ORTE_PROC_MY_NAME->vpid,
                    (long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
                               (ompistop.tv_usec - ompistart.tv_usec)));
        gettimeofday(&ompistart, NULL);
    }
    /* Once we've joined the RTE, see if any MCA parameters were
       passed to the MPI level */

    if (OMPI_SUCCESS != (ret = ompi_mpi_register_params())) {
        error = "mca_mpi_register_params() failed";
        goto error;
    }

    /* Setup process affinity */
    if ( NULL != ( slot_list = getenv("slot_list"))) {
        if (ORTE_SUCCESS != (ret = slot_list_to_cpu_set(slot_list))){
            error = "ompi_mpi_init: error slot_list assigning";
            goto error;
        }       
    }

    if (ompi_mpi_paffinity_alone) {
        bool set = false;
        param = mca_base_param_find("mpi", NULL, "paffinity_processor");
        if (param >= 0) {
            if (OMPI_SUCCESS == mca_base_param_lookup_int(param, &value)) {
                if (value >= 0) {
                    opal_paffinity_base_cpu_set_t mpi_cpumask;
                    OPAL_PAFFINITY_CPU_ZERO(mpi_cpumask);
                    OPAL_PAFFINITY_CPU_SET(value,mpi_cpumask);
                    if (OPAL_SUCCESS == opal_paffinity_base_set(mpi_cpumask)) {
                         set = true;
                    }
                }
            }
            if (!set) {
                char *vpid;
                orte_util_convert_vpid_to_string(&vpid, ORTE_PROC_MY_NAME->vpid);
                opal_show_help("help-mpi-runtime",
                               "mpi_init:startup:paffinity-unavailable",
                               true, vpid);
                free(vpid);
            }
            
            /* If we were able to set processor affinity, try setting
               up memory affinity */

            else {
                if (OPAL_SUCCESS == opal_maffinity_base_open() &&
                    OPAL_SUCCESS == opal_maffinity_base_select()) {
                    ompi_mpi_maffinity_setup = true;
                }
            }
        }
    }

    /* initialize datatypes. This step should be done early as it will
     * create the local convertor and local arch used in the proc
     * init.
     */
    if (OMPI_SUCCESS != (ret = ompi_ddt_init())) {
        error = "ompi_ddt_init() failed";
        goto error;
    }

    /* Initialize OMPI procs */
    if (OMPI_SUCCESS != (ret = ompi_proc_init())) {
        error = "mca_proc_init() failed";
        goto error;
    }

    /* initialize ops. This has to be done *after* ddt_init, but
       befor mca_coll_base_open, since come collective modules
       (e.g. the hierarchical) need them in the query function
    */
    if (OMPI_SUCCESS != (ret = ompi_op_init())) {
        error = "ompi_op_init() failed";
        goto error;
    }


    /* Open up MPI-related MCA components */

    if (OMPI_SUCCESS != (ret = mca_allocator_base_open())) {
        error = "mca_allocator_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = mca_rcache_base_open())) {
        error = "mca_rcache_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = mca_mpool_base_open())) {
        error = "mca_mpool_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = mca_pml_base_open())) {
        error = "mca_pml_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = mca_coll_base_open())) {
        error = "mca_coll_base_open() failed";
        goto error;
    }

    if (OMPI_SUCCESS != (ret = ompi_osc_base_open())) {
        error = "ompi_osc_base_open() failed";
        goto error;
    }

#if OPAL_ENABLE_FT == 1
    if (OMPI_SUCCESS != (ret = ompi_crcp_base_open())) {
        error = "ompi_crcp_base_open() failed";
        goto error;
    }
#endif

    /* In order to reduce the common case for MPI apps (where they
       don't use MPI-2 IO or MPI-1 topology functions), the io and
       topo frameworks are initialized lazily, at the first use of
       relevant functions (e.g., MPI_FILE_*, MPI_CART_*, MPI_GRAPH_*),
       so they are not opened here. */

    /* Select which MPI components to use */

    if (OMPI_SUCCESS != 
        (ret = mca_mpool_base_init(OMPI_ENABLE_PROGRESS_THREADS,
                                   OMPI_ENABLE_MPI_THREADS))) {
        error = "mca_mpool_base_init() failed";
        goto error;
    }

    if (OMPI_SUCCESS != 
        (ret = mca_pml_base_select(OMPI_ENABLE_PROGRESS_THREADS,
                                   OMPI_ENABLE_MPI_THREADS))) {
        error = "mca_pml_base_select() failed";
        goto error;
    }

    /* select buffered send allocator component to be used */
    ret=mca_pml_base_bsend_init(OMPI_ENABLE_MPI_THREADS);
    if( OMPI_SUCCESS != ret ) {
        error = "mca_pml_base_bsend_init() failed";
        goto error;
    }

    if (OMPI_SUCCESS != 
        (ret = mca_coll_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
                                            OMPI_ENABLE_MPI_THREADS))) {
        error = "mca_coll_base_find_available() failed";
        goto error;
    }

    if (OMPI_SUCCESS != 
        (ret = ompi_osc_base_find_available(OMPI_ENABLE_PROGRESS_THREADS,
                                           OMPI_ENABLE_MPI_THREADS))) {
        error = "ompi_osc_base_find_available() failed";
        goto error;
    }

#if OPAL_ENABLE_FT == 1
    if (OMPI_SUCCESS != (ret = ompi_crcp_base_select() ) ) {
        error = "ompi_crcp_base_select() failed";
        goto error;
    }
#endif

    /* io and topo components are not selected here -- see comment
       above about the io and topo frameworks being loaded lazily */

    /* Initialize each MPI handle subsystem */
    /* initialize requests */
    if (OMPI_SUCCESS != (ret = ompi_request_init())) {
        error = "ompi_request_init() failed";
        goto error;
    }

    /* initialize info */
    if (OMPI_SUCCESS != (ret = ompi_info_init())) {
        error = "ompi_info_init() failed";
        goto error;
    }

    /* initialize error handlers */
    if (OMPI_SUCCESS != (ret = ompi_errhandler_init())) {
        error = "ompi_errhandler_init() failed";
        goto error;
    }

    /* initialize error codes */
    if (OMPI_SUCCESS != (ret = ompi_mpi_errcode_init())) {
        error = "ompi_mpi_errcode_init() failed";
        goto error;
    }
    
    /* initialize internal error codes */
    if (OMPI_SUCCESS != (ret = ompi_errcode_intern_init())) {
        error = "ompi_errcode_intern_init() failed";
        goto error;
    }
     
    /* initialize groups  */
    if (OMPI_SUCCESS != (ret = ompi_group_init())) {
        error = "ompi_group_init() failed";
        goto error;
    }

    /* initialize communicators */
    if (OMPI_SUCCESS != (ret = ompi_comm_init())) {
        error = "ompi_comm_init() failed";
        goto error;
    }

    /* initialize file handles */
    if (OMPI_SUCCESS != (ret = ompi_file_init())) {
        error = "ompi_file_init() failed";
        goto error;
    }

    /* initialize windows */
    if (OMPI_SUCCESS != (ret = ompi_win_init())) {
        error = "ompi_win_init() failed";
        goto error;
    }

    /* initialize attribute meta-data structure for comm/win/dtype */
    if (OMPI_SUCCESS != (ret = ompi_attr_init())) {
        error = "ompi_attr_init() failed";
        goto error;
    }

    /* check for timing request - get stop time and report elapsed time if so */
    if (timing) {
        gettimeofday(&ompistop, NULL);
        opal_output(0, "ompi_mpi_init[%ld]: time from completion of orte_init to modex %ld usec",
                    (long)ORTE_PROC_MY_NAME->vpid,
                    (long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
                               (ompistop.tv_usec - ompistart.tv_usec)));
        gettimeofday(&ompistart, NULL);
    }
    
    /* exchange connection info - this function also acts as a barrier
     * as it will not return until the exchange is complete
     */
    if (OMPI_SUCCESS != (ret = orte_grpcomm.modex(NULL))) {
        error = "orte_grpcomm_modex failed";
        goto error;
    }
    
    if (timing) {
        gettimeofday(&ompistop, NULL);
        opal_output(0, "ompi_mpi_init[%ld]: time to execute modex %ld usec",
                    (long)ORTE_PROC_MY_NAME->vpid,
                    (long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
                               (ompistop.tv_usec - ompistart.tv_usec)));
        gettimeofday(&ompistart, NULL);
    }
    
    /* Fill in remote proc information */
    if (OMPI_SUCCESS != (ret = ompi_proc_get_info())) {
        ORTE_ERROR_LOG(ret);
        error = "ompi_mpi_init: ompi_proc_get_info failed";
        goto error;
    }

    /* Figure out the final MPI thread levels.  If we were not
       compiled for support for MPI threads, then don't allow
       MPI_THREAD_MULTIPLE. */

    ompi_mpi_thread_requested = requested;
    if (OMPI_HAVE_THREAD_SUPPORT == 0) {
        ompi_mpi_thread_provided = *provided = MPI_THREAD_SINGLE;
        ompi_mpi_main_thread = NULL;
    } else if (OMPI_ENABLE_MPI_THREADS == 1) {
        ompi_mpi_thread_provided = *provided = requested;
        ompi_mpi_main_thread = opal_thread_get_self();
    } else {
        if (MPI_THREAD_MULTIPLE == requested) {
            ompi_mpi_thread_provided = *provided = MPI_THREAD_SERIALIZED;
        } else {
            ompi_mpi_thread_provided = *provided = requested;
        }
        ompi_mpi_main_thread = opal_thread_get_self();
    }

    ompi_mpi_thread_multiple = (ompi_mpi_thread_provided == 
                                MPI_THREAD_MULTIPLE);
    if ((OMPI_ENABLE_PROGRESS_THREADS == 1) ||
        (*provided != MPI_THREAD_SINGLE)) {
        opal_set_using_threads(true);
    }

    /* start PML/BTL's */
    ret = MCA_PML_CALL(enable(true));
    if( OMPI_SUCCESS != ret ) {
        error = "PML control failed";
        goto error;
    }

    /* add all ompi_proc_t's to PML */
    if (NULL == (procs = ompi_proc_world(&nprocs))) {
        error = "ompi_proc_world() failed";
        goto error;
    }
    ret = MCA_PML_CALL(add_procs(procs, nprocs));
    free(procs);
    if( OMPI_SUCCESS != ret ) {
        error = "PML add procs failed";
        goto error;
    }

    MCA_PML_CALL(add_comm(&ompi_mpi_comm_world));
    MCA_PML_CALL(add_comm(&ompi_mpi_comm_self));

    /* Init coll for the comms */

    if (OMPI_SUCCESS !=
        (ret = mca_coll_base_comm_select(MPI_COMM_WORLD))) {
        error = "mca_coll_base_comm_select(MPI_COMM_WORLD) failed";
        goto error;
    }

    if (OMPI_SUCCESS != 
        (ret = mca_coll_base_comm_select(MPI_COMM_SELF))) {
        error = "mca_coll_base_comm_select(MPI_COMM_SELF) failed";
        goto error;
    }

    /*
     * Dump all MCA parameters if requested
     */
    if (ompi_mpi_show_mca_params) {
       ompi_show_all_mca_params(ompi_mpi_comm_world.c_my_rank, 
                                nprocs, 
                                orte_process_info.nodename);
    }

    /* wait for everyone to reach this point */
    if (OMPI_SUCCESS != (ret = orte_grpcomm.barrier())) {
        error = "orte_grpcomm_barrier failed";
        goto error;
    }
    
    /* wire up the oob interface, if requested.  Do this here because
       it will go much faster before the event library is switched
       into non-blocking mode */
    if (OMPI_SUCCESS != (ret = ompi_init_preconnect_oob())) {
        error = "ompi_mpi_do_preconnect_oob() failed";
        goto error;
    }

    /* check for timing request - get stop time and report elapsed
       time if so, then start the clock again */
    if (timing) {
        gettimeofday(&ompistop, NULL);
        opal_output(0, "ompi_mpi_init[%ld]: time from stage 2 cast to complete oob wireup %ld usec",
                    (long)ORTE_PROC_MY_NAME->vpid,
                    (long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
                               (ompistop.tv_usec - ompistart.tv_usec)));
        gettimeofday(&ompistart, NULL);
    }

#if OMPI_ENABLE_PROGRESS_THREADS == 0
    /* Start setting up the event engine for MPI operations.  Don't
       block in the event library, so that communications don't take
       forever between procs in the dynamic code.  This will increase
       CPU utilization for the remainder of MPI_INIT when we are
       blocking on ORTE-level events, but may greatly reduce non-TCP
       latency. */
    opal_progress_set_event_flag(OPAL_EVLOOP_NONBLOCK);
#endif
    
    /* wire up the mpi interface, if requested.  Do this after the
       non-block switch for non-TCP performance.  Do before the
       polling change as anyone with a complex wire-up is going to be
       using the oob. */
    if (OMPI_SUCCESS != (ret = ompi_init_preconnect_mpi())) {
        error = "ompi_mpi_do_preconnect_all() failed";
        goto error;
    }

    /* Setup the publish/subscribe (PUBSUB) framework */
    if (OMPI_SUCCESS != (ret = ompi_pubsub_base_open())) {
        error = "ompi_pubsub_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = ompi_pubsub_base_select())) {
        error = "ompi_pubsub_base_select() failed";
        goto error;
    }
    
    /* Setup the dynamic process management (DPM) framework */
    if (OMPI_SUCCESS != (ret = ompi_dpm_base_open())) {
        error = "ompi_dpm_base_open() failed";
        goto error;
    }
    if (OMPI_SUCCESS != (ret = ompi_dpm_base_select())) {
        error = "ompi_dpm_base_select() failed";
        goto error;
    }
    
    /* Check whether we have been spawned or not.  We introduce that
       at the very end, since we need collectives, datatypes, ptls
       etc. up and running here.... */
    if (OMPI_SUCCESS != (ret = ompi_dpm.dyn_init())) {
        error = "ompi_comm_dyn_init() failed";
        goto error;
    }

    /*
     * Startup the Checkpoint/Restart Mech.
     * Note: Always do this so tools don't hang when
     * in a non-checkpointable build
     */
    if (OMPI_SUCCESS != (ret = ompi_cr_init())) {
        error = "ompi_cr_init";
        goto error;
    }

    /* Undo ORTE calling opal_progress_event_users_increment() during
       MPI lifetime, to get better latency when not using TCP.  Do
       this *after* dyn_init, as dyn init uses lots of ORTE
       communication and we don't want to hinder the performance of
       that code. */
    opal_progress_event_users_decrement();

    /* see if the user specified yield_when_idle - if so, use it */
    param = mca_base_param_find("mpi", NULL, "yield_when_idle");
    mca_base_param_lookup_int(param, &value);
    if (value < 0) {
        /* TEMPORARY FIX - RIGHT NOW, WE DO NOT HAVE ACCESS TO
         * INFO ON THE NUMBER OF LOCAL PROCS. THE ORTED IS SETTING
         * THE MCA PARAM (OR THE PLS WILL, DEPENDING ON SYSTEM) SO
         * THE FOLLOWING CODE WILL **NEVER** BE EXECUTED *EXCEPT*
         * POSSIBLY BY SINGLETONS IN THE ABSENCE OF AN ENVIRO MCA PARAM
         */
#if 0
        /* nope - so let's figure out what we can/should do...
         * first, get the number of processors - if we can't then
         * we can't do anything but set conservative values
         */
        if (OPAL_SUCCESS == opal_get_num_processors(&num_processors)) {
            /* got the num_processors - compare that to the number of
             * local procs in this job to decide if we are oversubscribed
             */
            if (ompi_proc_local_proc->num_local_procs > num_processors) {
                /* oversubscribed - better yield */
                opal_progress_set_yield_when_idle(true);
            } else {
                /* not oversubscribed - go ahead and be a hog! */
                opal_progress_set_yield_when_idle(false);
            }
        } else {
            /* couldn't get num_processors - be conservative */
            opal_progress_set_yield_when_idle(true);
        }
#endif
        /* always just default to conservative */
        opal_progress_set_yield_when_idle(true);
    } else {
        /* yep, they specified it - so set idle accordingly */
        opal_progress_set_yield_when_idle(value == 0 ? false : true);
    }
    param = mca_base_param_find("mpi", NULL, "event_tick_rate");
    mca_base_param_lookup_int(param, &value);
    /* negative value means use default - just don't do anything */
    if (value >= 0) {
        opal_progress_set_event_poll_rate(value);
    }

    /* At this point, we are fully configured and in MPI mode.  Any
       communication calls here will work exactly like they would in
       the user's code.  Setup the connections between procs and warm
       them up with simple sends, if requested */

 error:
    if (ret != OMPI_SUCCESS) {
        const char *err_msg = opal_strerror(ret);
        opal_show_help("help-mpi-runtime",
                       "mpi_init:startup:internal-failure", true,
                       "MPI_INIT", "MPI_INIT", error, err_msg, ret);
        return ret;
    }

    /* Initialize the registered datarep list to be empty */

    OBJ_CONSTRUCT(&ompi_registered_datareps, opal_list_t);

    /* All done.  Wasn't that simple? */

    ompi_mpi_initialized = true;

    /* Do we need to wait for a debugger? */
    ompi_wait_for_debugger();

    /* check for timing request - get stop time and report elapsed time if so */
    if (timing) {
        gettimeofday(&ompistop, NULL);
        opal_output(0, "ompi_mpi_init[%ld]: time from oob wireup to complete mpi_init %ld usec",
                    (long)ORTE_PROC_MY_NAME->vpid,
                    (long int)((ompistop.tv_sec - ompistart.tv_sec)*1000000 +
                               (ompistop.tv_usec - ompistart.tv_usec)));
    }

    return MPI_SUCCESS;
}

/**
  *  This function receives a slot string ant translate it to
  *  cpu_set (long bitmap) using the PLPA module.
  */

static int socket_to_cpu_set(char **socket_list, int socket_cnt)
{
    int i;
    char **range;
    int range_cnt;
    int lower_range, upper_range;
    int processor_id, num_processors;
    int max_processor_id;
    int rc;
    opal_paffinity_base_cpu_set_t cpumask;

    if (OPAL_SUCCESS != (rc = opal_paffinity_base_get_processor_info(&num_processors, &max_processor_id))) {
        ORTE_ERROR_LOG(rc);
        return ORTE_ERROR;
    }
    OPAL_PAFFINITY_CPU_ZERO(cpumask);
    for (i=0; i<socket_cnt; i++) {
        if (0 == strcmp("*", socket_list[i])) {
            for ( processor_id=0; processor_id<=max_processor_id; processor_id++) {
                OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                if (OPAL_SUCCESS != ( rc = opal_paffinity_base_set(cpumask))) {
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                if (rmaps_rank_file_debug) {
                    opal_output(0,"rank %ld runon cpu #%d (any socket)",(long)ORTE_PROC_MY_NAME->vpid, processor_id);
                }
            }
            continue;
        }
        range = opal_argv_split(socket_list[i],'-');
        range_cnt = opal_argv_count(range);
        switch (range_cnt) {
            case 1:
                processor_id = atoi(range[0]);
                if (max_processor_id < processor_id) {
                    opal_output(0, "ERROR !!! max_processor_id (%d) < processor_id(%d), modify rankfile and run again\n",max_processor_id, processor_id);
                    ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                    return ORTE_ERROR;
                }
                OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                if (OPAL_SUCCESS != ( rc = opal_paffinity_base_set(cpumask))) {
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                if (rmaps_rank_file_debug) {
                    opal_output(0,"rank %ld runs on cpu #%d", (long)ORTE_PROC_MY_NAME->vpid, processor_id);
                }
                break;
            case 2:
                lower_range = atoi(range[0]);
                upper_range = atoi(range[1]);
                if (max_processor_id < upper_range || lower_range >= upper_range ) {
                    opal_output(0,"Error !!! Check your boundaries %d < %d(max_cpu) < %d , modify rankfile and run again\n",lower_range, max_processor_id, upper_range);
                    ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                    return ORTE_ERROR;
                }
                for (processor_id=lower_range; processor_id<=upper_range; processor_id++) {
                    OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                    if (OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                        ORTE_ERROR_LOG(rc);
                        return ORTE_ERROR;
                    }
                    if (rmaps_rank_file_debug) {
                        opal_output(0,"rank %ld runs on cpu #%d (%d-%d)",
                                    (long)ORTE_PROC_MY_NAME->vpid, processor_id, lower_range, upper_range);
                    }
                }
                break;
            default:
                opal_argv_free(range);
                ORTE_ERROR_LOG(ORTE_ERROR);
                return ORTE_ERROR;
        }
        opal_argv_free(range);
    }
    return ORTE_SUCCESS;
}

static int socket_core_to_cpu_set(char **socket_core_list, int socket_core_list_cnt)
{
        int rc, i;
        char **socket_core;
        int socket_core_cnt;
        char **range;
        int range_cnt;
        int lower_range, upper_range;
        int socket, core, processor_id ;
        int max_socket_num, max_core_num;
        int num_sockets, num_cores;
        opal_paffinity_base_cpu_set_t cpumask;
        
        socket_core = opal_argv_split (socket_core_list[0], ':');
        socket_core_cnt = opal_argv_count(socket_core);
        OPAL_PAFFINITY_CPU_ZERO(cpumask);
        socket = atoi(socket_core[0]);
        
        if ( OPAL_SUCCESS != ( rc = opal_paffinity_base_get_socket_info(&num_sockets, &max_socket_num))) {
            ORTE_ERROR_LOG(rc);
            return ORTE_ERROR;
        }
        
        if ( max_socket_num < socket) {
            opal_output(0,"ERROR !!! socket(%d) > max_socket_num(%d), modify rankfile and run again", socket, max_socket_num);
            return ORTE_ERROR;
        }
        if ( OPAL_SUCCESS != ( rc = opal_paffinity_base_get_core_info(socket, &num_cores, &max_core_num))) {
            opal_output(0,"Error !!! Invalid socket number (%d) in rankfile, modify rankfile and run again\n", socket);
            ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
            return ORTE_ERROR;
        }
        
        if (0 == strcmp("*",socket_core[1])) {
            for (core = 0; core <= max_core_num; core++) {
                if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                if (OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                if (rmaps_rank_file_debug) {
                    opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
               }
            }
        } else {
            range = opal_argv_split(socket_core[1], '-');
            range_cnt = opal_argv_count(range);
            switch (range_cnt) {
                case 1:
                    core = atoi(range[0]);
                    if ( max_core_num < core ) {
                        opal_output(0,"Error !!! core(%d) > max_core (%d) on socket %d, modify rankfile and run again\n",
                                core, max_core_num, socket);
                        ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                        return ORTE_ERROR;
                    }
                    if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                        ORTE_ERROR_LOG(rc);
                        return ORTE_ERROR;
                    }
                    OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                    if (OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                        ORTE_ERROR_LOG(rc);
                        return ORTE_ERROR;
                    }
                    if (rmaps_rank_file_debug) {
                        opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                    }
                    break;
                case 2:
                    lower_range = atoi(range[0]);
                    upper_range = atoi(range[1]);
                    if ( 0 > lower_range || max_core_num < upper_range || lower_range >= upper_range ) {
                        opal_output(0,"Error !!! Check your boundaries %d < %d(max_core) < %d ,modify rankfile and run again\n",
                                lower_range, max_core_num, upper_range);
                        ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                        return ORTE_ERROR;
                    }
                    for (core=lower_range; core<=upper_range; core++) {
                        if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                            ORTE_ERROR_LOG(rc);
                            return ORTE_ERROR;
                        }
                        OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                        if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                            ORTE_ERROR_LOG(rc);
                            return ORTE_ERROR;
                        }
                        if (rmaps_rank_file_debug) {
                            opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                        (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                        }
                    }
                    break;
                default:
                    opal_argv_free(range);
                    opal_argv_free(socket_core);
                    ORTE_ERROR_LOG(ORTE_ERROR);
                    return ORTE_ERROR;
            }
            opal_argv_free(range);
            opal_argv_free(socket_core);
        }
        for (i=1; i<socket_core_list_cnt; i++) {
            socket_core = opal_argv_split (socket_core_list[i], ':');
            socket_core_cnt = opal_argv_count(socket_core);
            switch (socket_core_cnt) {
                case 1:
                    range = opal_argv_split(socket_core[0], '-');
                    range_cnt = opal_argv_count(range);
                    switch (range_cnt) {
                        case 1:
                            core = atoi(range[0]);
                            /* use PLPA to construct the child->cpu_set */
                            if ( max_core_num < core ) {
                                opal_output(0,"Error !!! max_core(%d) < core(%d), modify rankfile and run again\n",max_core_num, core);
                                ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                                return ORTE_ERROR;
                            }
                            if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                                opal_output(0,"Error !!! Invalid socket : core pair ( #%d : %d), modify rankfile and run again\n",socket, core);
                                ORTE_ERROR_LOG(rc);
                                return ORTE_ERROR;
                            }
                            OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                            if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                                ORTE_ERROR_LOG(rc);
                                return ORTE_ERROR;
                            }
                            if (rmaps_rank_file_debug) {
                                opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                            (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);                                    
                            }
                            break;
                        case 2:
                            lower_range = atoi(range[0]);
                            upper_range = atoi(range[1]);
                            if ( 0 > lower_range || max_core_num < upper_range || lower_range >= upper_range) {
                                opal_output(0,"Error !!! Check your boundaries %d < %d(max_core) < %d, modify rankfile and run again\n",
                                        lower_range, max_core_num, upper_range);
                                ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                                return ORTE_ERROR;
                            }
                            for (core=lower_range; core<=upper_range; core++) {
                                if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                                    ORTE_ERROR_LOG(rc);
                                    return ORTE_ERROR;
                                }
                                OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                                if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                                    ORTE_ERROR_LOG(rc);
                                    return ORTE_ERROR;
                                }
                                if (rmaps_rank_file_debug) {
                                    opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",           
                                                (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                                } 
                            }
                            break;
                        default:
                            opal_argv_free(range);
                            opal_argv_free(socket_core);
                            ORTE_ERROR_LOG(ORTE_ERROR);
                            return ORTE_ERROR;
                    }
                    opal_argv_free(range);
                    break;
                case 2:
                    socket = atoi(socket_core[0]);
                    if (0 == strcmp("*",socket_core[1])) {
                        for (core=0; core<=max_core_num; core++) {
                            if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id ( socket, core, &processor_id))) {
                                ORTE_ERROR_LOG(rc);
                                return ORTE_ERROR;
                            }
                            OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                            if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                                ORTE_ERROR_LOG(rc);
                                return ORTE_ERROR;
                            }
                            if (rmaps_rank_file_debug) {
                                opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                            (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                            }
                        }
                    } else {
                        range = opal_argv_split(socket_core[1], '-');
                        range_cnt = opal_argv_count(range);
                        socket = atoi(socket_core[0]);
                        switch (range_cnt) {
                            case 1:
                                core = atoi(range[0]);
                                if ( max_core_num < core ) {
                                    opal_output(0,"Error !!! max_core(%d) < core(%d), modify rankfile and run again\n", max_core_num, core);
                                    ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                                    return ORTE_ERROR;
                                }
                                if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                                    ORTE_ERROR_LOG(rc);
                                    return ORTE_ERROR;
                                }
                                OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                                if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                                    ORTE_ERROR_LOG(rc);
                                    return ORTE_ERROR;
                                }
                                if (rmaps_rank_file_debug) {
                                    opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                                (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                                }
                                break;
                            case 2:
                                lower_range = atoi(range[0]);
                                upper_range = atoi(range[1]);
                                if ( 0 > lower_range || max_core_num < upper_range || lower_range > upper_range) {
                                    opal_output(0,"Error !!! Check your boundaries %d < %d(max_core) < %d, modify rankfile and run again\n",
                                            lower_range, max_core_num, upper_range);
                                    ORTE_ERROR_LOG(OPAL_ERR_BAD_PARAM);
                                    return ORTE_ERROR;
                                }
                                for ( core = lower_range; core <= upper_range; core++) {
                                    if ( OPAL_SUCCESS != (rc = opal_paffinity_base_map_to_processor_id (socket, core, &processor_id))) {
                                        ORTE_ERROR_LOG(rc);
                                        return ORTE_ERROR;
                                    }
                                    OPAL_PAFFINITY_CPU_SET(processor_id, cpumask);
                                    if ( OPAL_SUCCESS != (rc = opal_paffinity_base_set(cpumask))) {
                                        ORTE_ERROR_LOG(rc);
                                        return ORTE_ERROR;
                                    }
                                    if (rmaps_rank_file_debug) {
                                        opal_output(0,"rank %ld runs on pair %d:%d (cpu #%d)",
                                                    (long)ORTE_PROC_MY_NAME->vpid, socket, core, processor_id);
                                    }
                                }
                                break;
                            default:
                                opal_argv_free(range);
                                opal_argv_free(socket_core);
                                ORTE_ERROR_LOG(ORTE_ERROR);
                                return ORTE_ERROR;
                        }
                        opal_argv_free(range);
                    }
                    break;
                default:
                    opal_argv_free(socket_core);
                    ORTE_ERROR_LOG(ORTE_ERROR);
                    return ORTE_ERROR;
            }
            opal_argv_free(socket_core);
        }
        return ORTE_SUCCESS;
}

static int slot_list_to_cpu_set(char *slot_str)
{
        char **item;
        char **socket_core;
        orte_std_cntr_t item_cnt, socket_core_cnt;
        int rc;

        item = opal_argv_split (slot_str, ',');
        item_cnt = opal_argv_count (item);
        socket_core = opal_argv_split (item[0], ':');
        socket_core_cnt = opal_argv_count(socket_core);
        opal_argv_free(socket_core);
    
        switch (socket_core_cnt) {
            case 1:
                if (ORTE_SUCCESS != (rc = socket_to_cpu_set(item, item_cnt))) {
                    opal_argv_free(item);
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                break;
            case 2:
                if (ORTE_SUCCESS != (rc = socket_core_to_cpu_set(item, item_cnt))) {
                    opal_argv_free(item);
                    ORTE_ERROR_LOG(rc);
                    return ORTE_ERROR;
                }
                break;
            default:
                opal_argv_free(item);
                return ORTE_ERROR;
        }
        opal_argv_free(item);
        return ORTE_SUCCESS;
}