# mc ko.po # Copyright (C) 2000 Free Software Foundation, Inc. # Sung-Hyun Nam , 2000 msgid "" msgstr "" "Project-Id-Version: mc 4.5.44\n" "POT-Creation-Date: 2000-05-04 17:37+0900\n" "PO-Revision-Date: 2000-05-07 05:11:31+0900\n" "Last-Translator: Sung-Hyun Nam \n" "Language-Team: Korean \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=euc-kr\n" "Content-Transfer-Encoding: 8bit\n" #: edit/edit_key_translator.c:124 msgid " Emacs key: " msgstr " Emacs 글쇠: " #: edit/edit_key_translator.c:136 edit/edit_key_translator.c:151 msgid " Execute Macro " msgstr " 매크로 실행 " #. Input line for a single key press follows the ':' #: edit/edit_key_translator.c:136 edit/edit_key_translator.c:151 #: gtkedit/editcmd.c:760 gtkedit/editcmd.c:769 msgid " Press macro hotkey: " msgstr " 매크로 단축글쇠를 누르십시오: " #: edit/edit_key_translator.c:147 msgid " Insert Literal " msgstr " Literal 입력 " #: edit/edit_key_translator.c:147 msgid " Press any key: " msgstr " 아무 글쇠나 누르십시오: " #: gnome/gaction.c:33 #, c-format msgid "" "Unable to execute\n" "\"%s\".\n" "\n" "Please check it to see if it points to a valid command." msgstr "" "\"%s\"를\n" "실행할 수 없습니다.\n" "\n" "정상적인 명령을 가리키고 있는 지 확인하시기 바랍니다." #: gnome/gaction.c:40 #, c-format msgid "" "\".\n" "\n" "To fix this, bring up the mime-properties editor in the GNOME Control " "Center, and edit the default %s-action for \"%s\"." msgstr "" "\".\n" "\n" "이걸 고치려면 그놈 조정판에서 mime 속성 편집기를 열어서 \"%2$s\"에 대한 " "기본적인 %1$s-동작을 편집하십시요." #: gnome/gaction.c:46 #, c-format msgid "" "\".\n" "\n" "To fix this error, bring up this file's properties and change the default " "%s-action." msgstr "" "\".\n" "\n" "이 에러를 고치려면 파일의 속성을 열어서 기본적인 %s-동작을 바꾸십시요." #: gnome/gaction.c:51 #, c-format msgid "" "Unable to %s\n" "\"%s\"\n" "with the command:\n" "\"%s\"%s" msgstr "" "Unable to %s\n" "\"%s\"\n" "with the command:\n" "\"%s\"%s" #: gnome/gaction.c:137 gnome/gaction.c:154 msgid "open" msgstr "열기" #: gnome/gaction.c:194 gnome/gaction.c:211 msgid "edit" msgstr "편집" #: gnome/gaction.c:351 msgid "view" msgstr "보기" #: gnome/gcmd.c:49 msgid " There is no other panel to compare contents to " msgstr " There is no other panel to compare contents to " #: gnome/gcmd.c:85 msgid " Could not start a terminal " msgstr " 터미널을 열 수 없습니다 " #: gnome/gcmd.c:100 msgid "The Midnight Commander Team" msgstr " The Midnight Commander 팀" #: gnome/gcmd.c:102 msgid "bug reports: http://bugs.gnome.org, or use gnome-bug" msgstr "버그 레포트: http://bugs.gnome.org 혹은 gnome-bug 사용" #: gnome/gcmd.c:114 msgid "GNU Midnight Commander" msgstr "GNU Midnight Commander" #: gnome/gcmd.c:117 msgid "The GNOME edition of the Midnight Commander file manager." msgstr "The GNOME edition of the Midnight Commander file manager." #: gnome/gcmd.c:290 msgid "Sort By" msgstr "정렬" #. we define this up here so we can pass it in to our callback #: gnome/gcmd.c:295 msgid "Ignore case sensitivity." msgstr "대소문자 무시" #: gnome/gcmd.c:298 msgid "Sort files by " msgstr "Sort files by " #: gnome/gcmd.c:303 gnome/gcustom-layout.c:41 src/chmod.c:150 src/screen.c:413 msgid "Name" msgstr "이름" #: gnome/gcmd.c:310 msgid "File Type" msgstr "파일 종류" #: gnome/gcmd.c:316 gnome/gcustom-layout.c:45 src/screen.c:414 #: src/screen.c:415 msgid "Size" msgstr "크기" #: gnome/gcmd.c:322 msgid "Time Last Accessed" msgstr "마지막 액세스 시간" #: gnome/gcmd.c:328 msgid "Time Last Modified" msgstr "마지막 수정 시간" #: gnome/gcmd.c:334 msgid "Time Last Changed" msgstr "마지막 고쳐진 시간" #: gnome/gcmd.c:348 msgid "Reverse the order." msgstr "순서 뒤집기." #: gnome/gcmd.c:395 msgid "Enter name." msgstr "이름 입력." #: gnome/gcmd.c:401 msgid "Enter label for command:" msgstr "명령어 꼬리표 입력:" #: gnome/gcmd.c:506 msgid "Find all core files" msgstr "모든 core 파일 찾기" #: gnome/gcmd.c:509 src/panelize.c:350 msgid "Find rejects after patching" msgstr "기운 후 거부파일이 생겼습니다" #: gnome/gcmd.c:554 msgid "Run Command" msgstr "명령 실행" #. Frame 1 #: gnome/gcmd.c:559 msgid "Preset Commands" msgstr "명령 미리 조절" #. add add/remove buttons in center #: gnome/gcmd.c:576 gnome/gcustom-layout.c:183 msgid "Add" msgstr "추가" #: gnome/gcmd.c:580 gnome/gcustom-layout.c:184 msgid "Remove" msgstr "삭제" #. Frame 2 #: gnome/gcmd.c:588 msgid "Run this Command" msgstr "이 명령 실행" #: gnome/gcmd.c:595 msgid "Command: " msgstr "명령: " #: gnome/gcmd.c:674 msgid "Set Filter" msgstr "필터 설정" #: gnome/gcmd.c:679 gnome/gcmd.c:720 gnome/gcmd.c:725 gnome/gcmd.c:729 #: gnome/gscreen.c:2429 msgid "Show all files" msgstr "모든 파일 보여주기" #: gnome/gcmd.c:686 msgid "." msgstr "." #: gnome/gcmd.c:702 msgid "" "Enter a filter here for files in the panel view.\n" "\n" "For example:\n" "*.png will show just png images" msgstr "" "패널 보기에서 보고자 하는 파일의 필터를 입력하시오.\n" "\n" "예를 들면:\n" "*.png는 png 그림만을 보여줄 것입니다" #: gnome/gcmd.c:704 msgid "Enter a Regular Expression to filter files in the panel view." msgstr "패널 보기에서 파일 필터링을 위한 정규 표현식 입력." #: gnome/gcmd.c:764 msgid " Open with..." msgstr " Open with..." #: gnome/gcmd.c:765 msgid "Enter extra arguments:" msgstr "extra 인자 입력:" #: gnome/gcmd.c:835 msgid "Desktop entry properties" msgstr "데스크탑 엔트리 속성" #: gnome/gcmd.c:861 msgid "Select File" msgstr "파일 선택" #: gnome/gcmd.c:869 msgid "" "Enter a filter here to select files in the panel view with.\n" "\n" "For example:\n" "*.png will select all png images" msgstr "" "패널 보기에서 선택하고자 하는 파일의 필터를 입력하시오.\n" "\n" "예를 들면:\n" "*.png는 모든 png 그림을 선택할 것입니다" #: gnome/gcmd.c:871 msgid "Enter a regular expression here to select files in the panel view with." msgstr "패널 보기에서 파일 선택을 위한 정규 표현식 입력." #: gnome/gcmd.c:917 src/cmd.c:543 src/cmd.c:594 msgid " Malformed regular expression " msgstr " 이해할 수 없는 정규표현식 " #: gnome/gcmd.c:962 msgid "Creating a desktop link" msgstr "데스크탑 링크 생성" #: gnome/gcmd.c:963 msgid "Enter the URL:" msgstr "URL 입력:" #: gnome/gcustom-layout.c:34 msgid "Access Time" msgstr "접근 시간" #: gnome/gcustom-layout.c:35 msgid "Creation Time" msgstr "생성 시간" #. Group #: gnome/gcustom-layout.c:36 gnome/gnome-file-property-dialog.c:788 #: gnome/gnome-file-property-dialog.c:957 gnome/gprop.c:280 gnome/gprop.c:405 #: src/screen.c:427 msgid "Group" msgstr "집단" #: gnome/gcustom-layout.c:37 msgid "Group ID" msgstr "집단 ID" #: gnome/gcustom-layout.c:38 msgid "Inode Number" msgstr "Inode 숫자" #: gnome/gcustom-layout.c:39 src/achown.c:378 msgid "Mode" msgstr "모드" #: gnome/gcustom-layout.c:40 msgid "Modification Time" msgstr "수정 시간" #: gnome/gcustom-layout.c:42 msgid "Number of Hard Links" msgstr "하드 링크 갯수" #. Owner #: gnome/gcustom-layout.c:43 gnome/gnome-file-property-dialog.c:942 #: gnome/gprop.c:390 src/screen.c:426 msgid "Owner" msgstr "소유자" #: gnome/gcustom-layout.c:44 src/screen.c:420 msgid "Permission" msgstr "허용" #: gnome/gcustom-layout.c:46 msgid "Size (short)" msgstr "크기 (짧음)" #: gnome/gcustom-layout.c:47 msgid "Type" msgstr "Type" #: gnome/gcustom-layout.c:48 msgid "User ID" msgstr "사용자 ID" #: gnome/gcustom-layout.c:142 msgid "Possible Columns" msgstr "가능한 행" #: gnome/gcustom-layout.c:162 msgid "Displayed Columns" msgstr "표시될 행" #: gnome/gcustom-layout.c:304 msgid "Custom View" msgstr "사용자 보기" #: gnome/gdesktop.c:532 gnome/gmount.c:382 msgid "Warning" msgstr "경고" #: gnome/gdesktop.c:533 #, c-format msgid "Could not open %s; will not have desktop icons" msgstr "%s 열 수 없음; 초기 데스크탑 아이콘을 가질 수 없을 것임" #: gnome/gdesktop.c:1205 msgid "While running the mount/umount command" msgstr "mount/unmount 명령을 실행하는 도중" #: gnome/gdesktop.c:1274 msgid "While running the eject command" msgstr "eject 명령을 실행하는 도중" #: gnome/gdesktop.c:1458 gnome/gicon.c:282 gnome/gtools.c:46 msgid "Error" msgstr "에러" #: gnome/gdesktop.c:2617 msgid "" "Unable to locate the file:\n" "background-properties-capplet\n" "in your path.\n" "\n" "We are unable to set the background." msgstr "" "background-properties-capplet을\n" "경로에서 찾을 수 없습니다.\n" "\n" "배경을 설정할 수 없습니다." #: gnome/gdesktop.c:2640 gnome/glayout.c:362 msgid "_Terminal" msgstr "터미널(_T)" #: gnome/gdesktop.c:2640 gnome/glayout.c:363 msgid "Launch a new terminal in the current directory" msgstr "현재 디렉토리에서 새 터미널 열기" #. If this ever changes, make sure you update create_new_menu accordingly. #: gnome/gdesktop.c:2642 gnome/glayout.c:365 msgid "_Directory..." msgstr "디렉토리(_D)..." #: gnome/gdesktop.c:2642 gnome/glayout.c:366 msgid "Creates a new directory" msgstr "새로운 디렉토리을 생성" #: gnome/gdesktop.c:2643 msgid "URL L_ink..." msgstr "URL 링크(_i)..." #: gnome/gdesktop.c:2643 msgid "Creates a new URL link" msgstr "새로운 URL 링크 생성" #: gnome/gdesktop.c:2644 msgid "_Launcher..." msgstr "_Launcher..." #: gnome/gdesktop.c:2644 msgid "Creates a new launcher" msgstr "새로운 launcher 생성" #: gnome/gdesktop.c:2650 msgid "By _Name" msgstr "이름으로(_N)" #: gnome/gdesktop.c:2651 msgid "By File _Type" msgstr "파일 종류로(_T)" #: gnome/gdesktop.c:2652 msgid "By _Size" msgstr "크기로(_S)" #: gnome/gdesktop.c:2653 msgid "By Time Last _Accessed" msgstr "마지막 액세스 시간으로(_A)" #: gnome/gdesktop.c:2654 msgid "By Time Last _Modified" msgstr "마지막 수정 시간으로(_M)" #: gnome/gdesktop.c:2655 msgid "By Time Last _Changed" msgstr "마지막 고쳐진 시간으로(_C)" #: gnome/gdesktop.c:2663 gnome/glayout.c:462 msgid "_Arrange Icons" msgstr "아이콘 정렬(_A)" #: gnome/gdesktop.c:2664 msgid "Create _New Window" msgstr "새 창 생성(_N)" #: gnome/gdesktop.c:2666 gnome/glayout.c:464 msgid "Rescan _Desktop Directory" msgstr "디렉토리 다시 읽기(_D)" #: gnome/gdesktop.c:2667 gnome/glayout.c:465 msgid "Rescan De_vices" msgstr "장치 다시 읽기(_v)" #: gnome/gdesktop.c:2668 gnome/glayout.c:466 msgid "Recreate Default _Icons" msgstr "기본 아이콘 재생성(_I)" #: gnome/gdesktop.c:2670 msgid "Configure _Background Image" msgstr "배경 그림 설정(_B)" #. Icon position #: gnome/gdesktop-prefs.c:242 msgid "Icon position" msgstr "아이콘 위치" #. Snap and placement #: gnome/gdesktop-prefs.c:258 msgid "Automatic icon placement" msgstr "아이콘 위치 자동" #: gnome/gdesktop-prefs.c:262 msgid "Snap icons to grid" msgstr "Snap icons to grid" #: gnome/gdesktop-prefs.c:277 msgid "Use shaped icons" msgstr "shaped 아이콘 사용" #: gnome/gdesktop-prefs.c:281 msgid "Use shaped text" msgstr "shaped 텍스트 사용" #: gnome/gdesktop-prefs.c:335 msgid "Desktop" msgstr "데스크탑" #. Create the link to the user's home directory so that he will have an icon #: gnome/gdesktop-init.c:141 msgid "Home directory" msgstr "홈 디렉토리" #: gnome/gdialogs.c:60 msgid "To: " msgstr "...로:" #: gnome/gdialogs.c:61 msgid "Copying from: " msgstr "...로부터 복사: " #: gnome/gdialogs.c:62 msgid "Deleting file: " msgstr "파일 지움: " #: gnome/gdialogs.c:371 msgid "Files Exist" msgstr "파일 있음" #: gnome/gdialogs.c:386 msgid "" "Some of the files you are trying to copy already exist in the destination " "folder. Please select the action to be performed." msgstr "" "당신이 복사하고자 하는 파일들 중 몇개는 이미 대상 폴더에 존재하고 " "있습니다.수행될 항목을 선택하십시오." #: gnome/gdialogs.c:399 msgid "Prompt me before overwriting any file." msgstr "파일을 덮어쓰기전에 물어보기." #: gnome/gdialogs.c:406 msgid "Don't overwrite any files." msgstr "어떤 파일도 겹쳐쓸 수 없습니다." #: gnome/gdialogs.c:422 msgid "Overwrite:" msgstr "겹쳐쓰기:" #: gnome/gdialogs.c:429 msgid "Older files." msgstr "오래된 파일." #: gnome/gdialogs.c:435 msgid "Files only if size differs." msgstr "크기가 다른 파일만." #: gnome/gdialogs.c:441 msgid "All files." msgstr "모든 파일." #: gnome/gdialogs.c:481 msgid "File Exists" msgstr "파일 있음" #: gnome/gdialogs.c:487 #, c-format msgid "The target file already exists: %s" msgstr "대상 파일이 이미 있습니다: %s" #: gnome/gdialogs.c:494 msgid "Replace it?" msgstr "바꿀까요?" #: gnome/gdialogs.c:568 gtkedit/editwidget.c:1140 gtkedit/gtkedit.c:1250 #: src/file.c:802 src/screen.c:2398 src/screen.c:2428 src/tree.c:1014 msgid "Copy" msgstr "복사" #: gnome/gdialogs.c:571 gtkedit/editwidget.c:1141 gtkedit/gtkedit.c:1252 msgid "Move" msgstr "이동" #: gnome/gdialogs.c:583 msgid "Destination" msgstr "대상" #: gnome/gdialogs.c:597 msgid "Find Destination Folder" msgstr "대상 폴더 찾기" #: gnome/gdialogs.c:611 msgid "Copy as a background process" msgstr "Background로 복사" #: gnome/gdialogs.c:629 msgid "Advanced Options" msgstr "Advanced 옵션" #: gnome/gdialogs.c:633 msgid "Preserve symlinks" msgstr "심볼릭링크 보존" #: gnome/gdialogs.c:643 msgid "Follow links." msgstr "링크 따르기." #: gnome/gdialogs.c:649 msgid "" "Selecting this will copy the files that symlinks point to instead of just " "copying the link." msgstr "" "이것을 선택하면 단지 링크를 복사하는 것이 아니라 심볼링 링크가 가리키는 " "파일을 복사하게 됩니다." #: gnome/gdialogs.c:654 msgid "Preserve file attributes." msgstr "파일 속성 보존" #: gnome/gdialogs.c:660 msgid "Preserves the permissions and the UID/GID if possible" msgstr "가능하면 퍼미션 및 UID/GID를 보존" #: gnome/gdialogs.c:666 msgid "Recursively copy subdirectories." msgstr "하위디렉토리까지 복사" #: gnome/gdialogs.c:673 msgid "If set, this will copy the directories recursively" msgstr "이것이 설정되면 디렉토리을 밑의 디렉토리까지 복사합니다" #: gnome/gdialogs.c:780 #, c-format msgid "" "%s\n" "\n" "Directory not empty. Delete it recursively?" msgstr "" "%s\n" "\n" "빈 디렉토리이 아닌데요. 그래도 지울까요?" #: gnome/gdialogs.c:790 src/file.c:2244 msgid " Delete: " msgstr " 지우기: " #: gnome/gdialogs.c:794 msgid "Do the same for the rest" msgstr "나머지에 대해서도 같은 동작 수행" #: gnome/gdialogs.c:877 msgid "Move Progress" msgstr "이동중" #: gnome/gdialogs.c:880 msgid "Copy Progress" msgstr "복사중" #: gnome/gdialogs.c:883 msgid "Delete Progress" msgstr "삭제중" #: gnome/gdialogs.c:939 msgid "File " msgstr "파일 " #: gnome/gdialogs.c:943 msgid "is " msgstr "is " #: gnome/gdialogs.c:946 msgid "done." msgstr "done." #. Translators should take care as "Password" or its translations #. are used to identify password boxes and hide characters with "*" #: gnome/gdialogs.c:1007 src/wtools.c:587 vfs/vfs.c:1886 msgid "Password:" msgstr "비밀번호:" #: gnome/gdialogs.c:1007 msgid "Password" msgstr "비밀번호" #. Create the dialog #: gnome/gdialogs.c:1039 msgid "Symbolic Link" msgstr "심볼릭 링크" #: gnome/gdialogs.c:1055 src/boxes.c:803 msgid "Existing filename (filename symlink will point to):" msgstr "대상 파일명 (심볼릭링크 파일이 가리킬 파일):" #: gnome/gdialogs.c:1069 src/boxes.c:801 msgid "Symbolic link filename:" msgstr "심볼릭링크 파일명:" #: gnome/gdnd.c:53 msgid "_Move here" msgstr "여기로 이동(_M)" #: gnome/gdnd.c:54 msgid "_Copy here" msgstr "여기로 복사(_C)" #: gnome/gdnd.c:55 msgid "_Link here" msgstr "여기로 연결(_L)" #: gnome/gdnd.c:57 msgid "Cancel drag" msgstr "드래그 취소" #. FIXME: this error message sucks #: gnome/gdnd.c:193 #, c-format msgid "" "Could not stat %s\n" "%s" msgstr "" "%s 파일정보를 얻을 수 없어요\n" "%s" #: gnome/gicon.c:282 msgid "Default set of icons not found, check your installation" msgstr "기본 아이콘 세트를 찾을 수 없음. 인스틀이 제대로 되었는 지 확인하시오" #: gnome/glayout.c:41 msgid "_Icon View" msgstr "아이콘 보기(_I)" #: gnome/glayout.c:42 gnome/glayout.c:58 msgid "Switch view to an icon display" msgstr "아이콘 보기로 전환" #: gnome/glayout.c:44 msgid "_Brief View" msgstr "간단히 보기(_B)" #: gnome/glayout.c:45 gnome/glayout.c:61 msgid "Switch view to show just file name and type" msgstr "파일 이름과 형식 보기로 전환" #: gnome/glayout.c:47 msgid "_Detailed View" msgstr "자세히 보기(_D)" #: gnome/glayout.c:48 gnome/glayout.c:64 msgid "Switch view to show detailed file statistics" msgstr "파일 상태를 자세히 보기로 전환" #: gnome/glayout.c:50 msgid "_Custom View" msgstr "사용자 보기(_C)" #: gnome/glayout.c:51 gnome/glayout.c:67 msgid "Switch view to show user-defined statistics" msgstr "사용자가 설정한 상태로 보기 전환" #: gnome/glayout.c:57 msgid "Icons" msgstr "아이콘" #: gnome/glayout.c:60 msgid "Brief" msgstr "간단히" #: gnome/glayout.c:63 msgid "Detailed" msgstr "자세히" #: gnome/glayout.c:66 msgid "Custom" msgstr "사용자 보기" #: gnome/glayout.c:302 msgid "Enter command to run" msgstr "실행할 명령 입력" #: gnome/glayout.c:315 msgid "" "Notice that if you choose to terminate the file manager, you will\n" "also terminate the GNOME desktop handler.\n" "\n" "Are you sure you want to exit?" msgstr "" "당신의 파일 관리자 종료를 선택하면 그놈 데스크탑 매니져도\n" "종료하게 됨을 알아 두십시오.\n" "\n" "정말로 종료하기를 원하십니까?" #: gnome/glayout.c:327 msgid "" "The file manager and the desktop handler are now terminating\n" "\n" "If you want to start up again the desktop handler or the file manager\n" "you can launch it from the Panel, or you can run the UNIX command `gmc'\n" "\n" "Press OK to terminate the application, or cancel to continue using it." msgstr "" "파일 관리자와 데스크탑 매니져는 이제 종료됩니다.\n" "\n" "다시 파일 관리자나 데스크탑 매니져를 시작하고 싶으시면 패널에서\n" "그것들을 시작할 수도 있고, 혹은 유닉스 명령 `gmc'를 실행하십시오\n" "\n" "응용프로그램을 종료하기 위해 확인 버튼을 누르거나 계속 사용하시려면\n" "취소 버튼을 누르십시오." #: gnome/glayout.c:367 msgid "_File..." msgstr "파일(_F)..." #: gnome/glayout.c:368 msgid "Creates a new file in this directory" msgstr "이 디렉토리에 새로운 파일을 생성" #. GNOMEUIINFO_ITEM_NONE(N_("Open _FTP site"), N_("Opens an FTP site"), ftplink_cmd }, #: gnome/glayout.c:389 gnome/gscreen.c:2098 msgid "_Copy..." msgstr "복사(_C)..." #: gnome/glayout.c:389 msgid "Copy files" msgstr "파일 복사" #: gnome/glayout.c:390 gnome/gscreen.c:2099 msgid "_Delete..." msgstr "지우기(_D)..." #: gnome/glayout.c:390 msgid "Delete files" msgstr "파일 지움" #: gnome/glayout.c:391 gnome/gscreen.c:2100 msgid "_Move..." msgstr "이동(_M)..." #: gnome/glayout.c:391 msgid "Rename or move files" msgstr "파일 이름을 바꾸거나 이동" #: gnome/glayout.c:393 msgid "Show directory sizes" msgstr "디렉토리 크기 보기" #: gnome/glayout.c:393 msgid "Shows the disk space used by each directory" msgstr "각 디렉토리이 사용하고 있는 디스크 용량을 보여줌" #: gnome/glayout.c:395 msgid "Close window" msgstr "창 닫기" #: gnome/glayout.c:395 msgid "Closes this window" msgstr "이 창 닫기" #: gnome/glayout.c:402 msgid "Select _All" msgstr "모두 선택(_A)" #: gnome/glayout.c:402 msgid "Select all files in the current Panel" msgstr "현재 패널의 모든 파일 선택" #: gnome/glayout.c:404 msgid "_Select Files..." msgstr "파일 선택(_S)..." #: gnome/glayout.c:404 msgid "Select a group of files" msgstr "파일을 묶어서 선택" #: gnome/glayout.c:405 msgid "_Invert Selection" msgstr "선택 반전(_I)" #: gnome/glayout.c:405 msgid "Reverses the list of tagged files" msgstr "선택된 파일과 선택되지 않은 파일을 반전시킴" #: gnome/glayout.c:408 gtkedit/editwidget.c:1142 src/view.c:2085 msgid "Search" msgstr "찾기" #: gnome/glayout.c:408 msgid "Search for a file in the current Panel" msgstr "현재 패널에서 파일 찾기" #: gnome/glayout.c:411 gnome/gscreen.c:1428 msgid "_Rescan Directory" msgstr "디렉토리 다시 읽기(_R)" #: gnome/glayout.c:411 msgid "Rescan the directory contents" msgstr "디렉토리 다시 읽기" #: gnome/glayout.c:421 msgid "_Sort By..." msgstr "정렬(_S)..." #: gnome/glayout.c:421 msgid "Confirmation settings" msgstr "확인 내용 설정" #: gnome/glayout.c:422 msgid "_Filter View..." msgstr "필터 보기(_F)..." #: gnome/glayout.c:422 msgid "Global option settings" msgstr "전체 선택항목 설정" #: gnome/glayout.c:429 msgid "_Find File..." msgstr "파일 찾기(_F)" #: gnome/glayout.c:429 msgid "Locate files on disk" msgstr "디스크에서의 파일 위치" #. { GNOME_APP_UI_ITEM, N_("_Compare panels..."), N_("Compare two panel contents"), gnome_compare_panels }, #: gnome/glayout.c:432 msgid "_Edit mime types..." msgstr "mime 형식 편집(_E)..." #: gnome/glayout.c:432 msgid "Edits the MIME type bindings" msgstr "MIME 형식 바인딩 편집" #: gnome/glayout.c:434 msgid "_Run Command..." msgstr "명령 실행(_R)" #: gnome/glayout.c:434 msgid "Runs a command" msgstr "명령 실행" #: gnome/glayout.c:436 msgid "_Run Command in panel..." msgstr "패널에서 명령 실행(_R)..." #: gnome/glayout.c:436 msgid "Run a command and put the results in a panel" msgstr "명령을 실행하여 그 결과를 패널에 표시" #: gnome/glayout.c:446 msgid "_Background jobs..." msgstr "Background jobs(_B)..." #: gnome/glayout.c:446 msgid "List of background operations" msgstr "background operations 목록" #: gnome/glayout.c:449 msgid "Exit" msgstr "종료" #: gnome/glayout.c:449 msgid "Terminates the file manager and the desktop" msgstr "파일 관리자와 데스크탑 종료" #: gnome/glayout.c:473 gnome/glayout.c:484 msgid "_Settings" msgstr "설정(_S)" #: gnome/glayout.c:474 gnome/glayout.c:485 msgid "_Layout" msgstr "배치(_L)" #: gnome/glayout.c:475 gnome/glayout.c:486 msgid "_Commands" msgstr "명령(_C)" #: gnome/glayout.c:476 msgid "_Desktop" msgstr "데스크탑(_D)" #: gnome/glayout.c:477 gnome/glayout.c:487 msgid "_Help" msgstr "도움말(_H)" #: gnome/glayout.c:627 msgid "File/New/Directory..." msgstr "파일(F)/새로운(N)/디렉토리(D)..." #: gnome/gmain.c:554 msgid "" "You are running the GNOME File Manager as root.\n" "\n" "As root, you can damage your system if you are not careful, and the GNOME " "File Manager will not stop you from doing it." msgstr "" "수퍼유저로서 그놈 파일 관지자를 실행하고 있습니다.\n" "\n" "조심하지 않으면 시스템을 파괴시킬 수도 있으며, 그놈 파일 관리자는 당신이 " "그런 일을 하는 것을 알 수 없습니다." #: gnome/gmount.c:218 msgid "Could not open the /etc/fstab file" msgstr "/etc/fstab 파일을 열 수 없습니다" #: gnome/gmount.c:383 #, c-format msgid "Could not symlink %s to %s; will not have such a desktop device icon." msgstr "" "%s를 %s로 심볼릭링크 만들 수 없음; 그런 데스크탑 아이콘을 가질 수 없을 것임" #: gnome/gmount.c:439 #, c-format msgid "CD-ROM %d" msgstr "CD-ROM %d" #: gnome/gmount.c:451 #, c-format msgid "Floppy %d" msgstr "플로피 %d" #: gnome/gmount.c:457 #, c-format msgid "Disk %d" msgstr "디스크 %d" #: gnome/gmount.c:462 #, c-format msgid "NFS dir %s" msgstr "NFS dir %s" #: gnome/gmount.c:466 #, c-format msgid "Device %d" msgstr "디바이스 %d" #. we set the file part #: gnome/gnome-file-property-dialog.c:171 msgid "Full Name: " msgstr "전체 이름: " #: gnome/gnome-file-property-dialog.c:179 msgid "File Name" msgstr "파일명" #: gnome/gnome-file-property-dialog.c:204 #: gnome/gnome-file-property-dialog.c:210 msgid "File Type: " msgstr "파일 종류: " #: gnome/gnome-file-property-dialog.c:217 msgid "File Type: Symbolic Link" msgstr "파일 종류: 심볼릭 링크" #: gnome/gnome-file-property-dialog.c:222 msgid "Target Name: INVALID LINK" msgstr "대상 이름: 유효하지 않은 링크" #: gnome/gnome-file-property-dialog.c:225 msgid "Target Name: " msgstr "대상 이름: " #: gnome/gnome-file-property-dialog.c:230 msgid "File Type: Directory" msgstr "파일 종류: 디렉토리" #: gnome/gnome-file-property-dialog.c:232 msgid "File Type: Character Device" msgstr "파일 종류: 문자 장치" #: gnome/gnome-file-property-dialog.c:234 msgid "File Type: Block Device" msgstr "파일 종류: 블럭 장치" #: gnome/gnome-file-property-dialog.c:236 msgid "File Type: Socket" msgstr "파일 종류: 소켓" #: gnome/gnome-file-property-dialog.c:238 msgid "File Type: FIFO" msgstr "파일 종류: 피포" #: gnome/gnome-file-property-dialog.c:248 #: gnome/gnome-file-property-dialog.c:252 #: gnome/gnome-file-property-dialog.c:258 msgid "File Size: " msgstr "파일 크기: " #: gnome/gnome-file-property-dialog.c:248 msgid " bytes" msgstr " 바이트" #: gnome/gnome-file-property-dialog.c:252 msgid " KBytes (" msgstr " 킬로바이트 (" #: gnome/gnome-file-property-dialog.c:253 #: gnome/gnome-file-property-dialog.c:259 msgid " bytes)" msgstr " 바이트)" #: gnome/gnome-file-property-dialog.c:258 msgid " MBytes (" msgstr " 메가바이트 (" #: gnome/gnome-file-property-dialog.c:266 msgid "File Size: N/A" msgstr "파일 크기: N/A" #: gnome/gnome-file-property-dialog.c:277 msgid "File Created on: " msgstr "파일 생성일: " #: gnome/gnome-file-property-dialog.c:286 msgid "Last Modified on: " msgstr "마지막 수정 시간: " #: gnome/gnome-file-property-dialog.c:295 msgid "Last Accessed on: " msgstr "마지막 액세스 시간: " #: gnome/gnome-file-property-dialog.c:313 msgid "URL:" msgstr "URL:" #: gnome/gnome-file-property-dialog.c:320 msgid "Caption:" msgstr "캡션:" #: gnome/gnome-file-property-dialog.c:397 #: gnome/gnome-file-property-dialog.c:499 msgid "Drop Action" msgstr "Drop 동작" #: gnome/gnome-file-property-dialog.c:398 msgid "Use default Drop Action options" msgstr "기본적인 Drop 동작 사용" #: gnome/gnome-file-property-dialog.c:413 #: gnome/gnome-file-property-dialog.c:501 gnome/gpopup2.c:203 #: src/screen.c:2396 src/screen.c:2426 msgid "View" msgstr "보기" #: gnome/gnome-file-property-dialog.c:414 msgid "Use default View options" msgstr "기본적인 보기 옵션 사용" #: gnome/gnome-file-property-dialog.c:449 msgid "Select an Icon" msgstr "아이콘 선택" #. we do open first #: gnome/gnome-file-property-dialog.c:479 gnome/gpopup2.c:195 msgid "Open" msgstr "열기" #: gnome/gnome-file-property-dialog.c:489 msgid "Use default Open action" msgstr "기본적인 열기 동작 사용" #: gnome/gnome-file-property-dialog.c:512 msgid "Use default Drop action" msgstr "기본적인 Drop 동작 사용" #: gnome/gnome-file-property-dialog.c:514 msgid "Use default View action" msgstr "기본적인 보기 동작 사용" #: gnome/gnome-file-property-dialog.c:523 gnome/gpopup2.c:205 #: src/screen.c:2397 src/screen.c:2427 src/view.c:2081 msgid "Edit" msgstr "편집" #: gnome/gnome-file-property-dialog.c:533 msgid "Use default Edit action" msgstr "기본적인 편집 동작 사용" #: gnome/gnome-file-property-dialog.c:587 gnome/gprop.c:521 msgid "Icon" msgstr "아이콘" #. We must be a file or a link to a file. #: gnome/gnome-file-property-dialog.c:621 msgid "File Actions" msgstr "파일 동작" #: gnome/gnome-file-property-dialog.c:626 msgid "Open action" msgstr "열기 동작" #: gnome/gnome-file-property-dialog.c:627 msgid "Needs terminal to run" msgstr "실행시 단말 사용" #: gnome/gnome-file-property-dialog.c:753 msgid "File Permissions" msgstr "파일 허용" #: gnome/gnome-file-property-dialog.c:764 gnome/gprop.c:259 msgid "Current mode: " msgstr "현재 모드: " #. Headings #: gnome/gnome-file-property-dialog.c:780 gnome/gprop.c:272 msgid "Read" msgstr "읽기" #: gnome/gnome-file-property-dialog.c:781 gnome/gprop.c:273 msgid "Write" msgstr "쓰기" #: gnome/gnome-file-property-dialog.c:782 gnome/gprop.c:274 msgid "Exec" msgstr "실행" #: gnome/gnome-file-property-dialog.c:783 gnome/gprop.c:275 msgid "Special" msgstr "스페셜" #. Permissions #: gnome/gnome-file-property-dialog.c:787 gnome/gprop.c:279 msgid "User" msgstr "사용자" #: gnome/gnome-file-property-dialog.c:789 gnome/gprop.c:281 msgid "Other" msgstr "다른 사용자" #. Special #: gnome/gnome-file-property-dialog.c:793 gnome/gprop.c:285 msgid "Set UID" msgstr "UID 설정" #: gnome/gnome-file-property-dialog.c:794 gnome/gprop.c:286 msgid "Set GID" msgstr "GID 설정" #: gnome/gnome-file-property-dialog.c:795 gnome/gprop.c:287 msgid "Sticky" msgstr "Sticky" #: gnome/gnome-file-property-dialog.c:917 #, c-format msgid " (%d)" msgstr " (%d)" #: gnome/gnome-file-property-dialog.c:931 msgid "File ownership" msgstr "파일 소유관계" #: gnome/gnome-file-property-dialog.c:1097 msgid "URL" msgstr "URL" #: gnome/gnome-file-property-dialog.c:1100 msgid "Statistics" msgstr "통계" #: gnome/gnome-file-property-dialog.c:1106 msgid "Options" msgstr "선택항목" #: gnome/gnome-file-property-dialog.c:1109 msgid "Permissions" msgstr "허용" #: gnome/gnome-file-property-dialog.c:1112 msgid " Properties" msgstr " 속성" #: gnome/gnome-file-property-dialog.c:1164 #: gnome/gnome-file-property-dialog.c:1175 msgid "You entered an invalid username" msgstr "유효하지 않은 사용자이름을 입력하셨습니다" #: gnome/gnome-file-property-dialog.c:1220 msgid "You must rename your file to something" msgstr "다른 이름으로 파일명을 바꾸어야 합니다" #: gnome/gnome-file-property-dialog.c:1226 msgid "You cannot rename a file to something containing a '/' character" msgstr "'/' 문자를 포함하는 파일명으로는 바꿀 수 없습니다" #: gnome/gnome-open-dialog.c:385 #, c-format msgid "Select an application to open \"%s\" with." msgstr "Select an application to open \"%s\" with." #: gnome/gnome-open-dialog.c:395 msgid "Select a file to run with" msgstr "Select a file to run with" #. the file tree #: gnome/gnome-open-dialog.c:406 msgid "Applications" msgstr "응용프로그램" #: gnome/gnome-open-dialog.c:422 msgid "Program to run" msgstr "실행할 프로그램" #: gnome/gpopup2.c:197 msgid "Mount device" msgstr "장치 마운트" #: gnome/gpopup2.c:198 msgid "Unmount device" msgstr "장치 언마운트" #: gnome/gpopup2.c:199 msgid "Eject device" msgstr "장치 추출" #: gnome/gpopup2.c:202 msgid "Open with..." msgstr "Open with..." #: gnome/gpopup2.c:204 msgid "View Unfiltered" msgstr "필터없이 보기" #: gnome/gpopup2.c:207 msgid "Copy..." msgstr "복사..." #: gnome/gpopup2.c:208 gtkedit/editwidget.c:1143 src/screen.c:2401 #: src/screen.c:2431 msgid "Delete" msgstr "지우기" #: gnome/gpopup2.c:209 msgid "Move..." msgstr "이동..." #: gnome/gpopup2.c:210 msgid "Hard Link..." msgstr "하드 링크..." #: gnome/gpopup2.c:211 msgid "Symlink..." msgstr "심볼릭연결..." #: gnome/gpopup2.c:212 msgid "Edit Symlink..." msgstr "심볼릭링크 수정..." #: gnome/gpopup2.c:214 msgid "Properties..." msgstr "속성..." #: gnome/gprefs.c:92 msgid "Show backup files" msgstr "백업 파일 보기" #: gnome/gprefs.c:96 msgid "Show hidden files" msgstr "숨은 파일 보기" #: gnome/gprefs.c:100 msgid "Mix files and directories" msgstr "파일과 디렉토리 섞음" #: gnome/gprefs.c:104 msgid "Use shell patterns instead of regular expressions" msgstr "정규표현식 대신 쉘 패턴 사용" #: gnome/gprefs.c:108 msgid "Determine file types from file content instead of extensions" msgstr "" #: gnome/gprefs.c:117 msgid "Confirm when deleting file" msgstr "파일 삭제전에 확인" #: gnome/gprefs.c:121 msgid "Confirm when overwriting files" msgstr "파일 겹쳐쓰기전에 확인" #: gnome/gprefs.c:125 msgid "Confirm when executing files" msgstr "파일 실행전에 확인" #: gnome/gprefs.c:129 msgid "Show progress while operations are being performed" msgstr "작업을 수행하는 동안 진행상황 표시" #: gnome/gprefs.c:138 msgid "VFS Timeout:" msgstr "VFS 타임아웃:" #: gnome/gprefs.c:139 gnome/gprefs.c:164 msgid "Seconds" msgstr "초" #: gnome/gprefs.c:142 msgid "Anonymous FTP password:" msgstr "Anonymous FTP 비밀번호:" #: gnome/gprefs.c:146 msgid "Always use FTP proxy" msgstr "항상 FTP proxy 사용" #: gnome/gprefs.c:155 msgid "Fast directory reload" msgstr "디렉토리 빨리 다시읽기" #: gnome/gprefs.c:159 msgid "Compute totals before copying files" msgstr "파일 복사전에 전체크기 계산" #: gnome/gprefs.c:163 msgid "FTP directory cache timeout :" msgstr "FTP 디렉토리 캐쉬 타임아웃:" #: gnome/gprefs.c:167 msgid "Allow customization of icons in icon view" msgstr "아이콘뷰에서 아이콘 바꾸기 허용" #: gnome/gprefs.c:176 msgid "File display" msgstr "파일 표시" #: gnome/gprefs.c:180 msgid "Confirmation" msgstr "확인" #: gnome/gprefs.c:184 msgid "VFS" msgstr "VFS" #: gnome/gprefs.c:188 msgid "Caching" msgstr "캐쉬" #: gnome/gprefs.c:478 msgid "Preferences" msgstr "속성" #: gnome/gprop.c:58 gnome/gprop.c:75 msgid "Filename" msgstr "파일명" #: gnome/gprop.c:67 msgid "Full name: " msgstr "전체 이름: " #: gnome/gprop.c:109 src/panelize.c:205 msgid "Command" msgstr "명령어" #: gnome/gprop.c:119 msgid "Command:" msgstr "명령:" #: gnome/gprop.c:129 msgid "Use terminal" msgstr "단말 사용" #: gnome/gprop.c:248 msgid "File mode (permissions)" msgstr "파일 모드 (허용)" #: gnome/gprop.c:321 gnome/gprop.c:347 msgid "" msgstr "" #: gnome/gprop.c:494 msgid "General" msgstr "일반" #: gnome/gprop.c:505 msgid "Title" msgstr "제목" #: gnome/gprop.c:535 msgid "Select icon" msgstr "아이콘 선택" #: gnome/gscreen.c:1428 msgid "Reloads the current directory" msgstr "현재 디렉토리 다시 읽기" #: gnome/gscreen.c:1430 msgid "New _Directory..." msgstr "새 디렉토리(_D)..." #: gnome/gscreen.c:1430 msgid "Creates a new directory here" msgstr "새로운 디렉토리을 생성" #: gnome/gscreen.c:1432 msgid "New _File..." msgstr "새 파일(_F)..." #: gnome/gscreen.c:1432 msgid "Creates a new file here" msgstr "여기에 새 파일을 생성" #: gnome/gscreen.c:1633 #, c-format msgid "Search: %s" msgstr "찾기: %s" #: gnome/gscreen.c:1643 #, c-format msgid "%s bytes in %d file" msgstr "%s bytes in %d file" #: gnome/gscreen.c:1643 #, c-format msgid "%s bytes in %d files" msgstr "%s bytes in %d files" #: gnome/gscreen.c:1669 src/screen.c:688 msgid "" msgstr "" #: gnome/gscreen.c:2098 msgid "Copy directory" msgstr "디렉토리 복사" #: gnome/gscreen.c:2099 msgid "Delete directory" msgstr "디렉토리 삭제" #: gnome/gscreen.c:2100 msgid "Rename or move directory" msgstr "디렉토리 이름을 바꾸거나 이동" #: gnome/gscreen.c:2258 msgid "Back" msgstr "뒤로" #: gnome/gscreen.c:2258 msgid "Go to the previously visited directory" msgstr "바로 전 디렉토리으로 가기" #: gnome/gscreen.c:2260 msgid "Up" msgstr "위로" #: gnome/gscreen.c:2260 msgid "Go up a level in the directory heirarchy" msgstr "윗 디렉토리으로 가기" #: gnome/gscreen.c:2262 msgid "Forward" msgstr "앞으로" #: gnome/gscreen.c:2262 msgid "Go to the next directory" msgstr "다음 디렉토리으로 가기" #: gnome/gscreen.c:2265 src/tree.c:1010 msgid "Rescan" msgstr "Rescan" #: gnome/gscreen.c:2265 msgid "Rescan the current directory" msgstr "현재 디렉토리 다시 읽기" #: gnome/gscreen.c:2268 msgid "Home" msgstr "홈" #: gnome/gscreen.c:2268 msgid "Go to your home directory" msgstr "홈 디렉토리으로 가기" #: gnome/gscreen.c:2408 msgid "Location:" msgstr "위치:" #. 1 #: gnome/gtools.c:105 gtkedit/editcmd.c:386 gtkedit/editcmd.c:1234 #: gtkedit/editcmd.c:1319 gtkedit/editcmd.c:2983 gtkedit/editoptions.c:69 #: src/boxes.c:138 src/boxes.c:278 src/boxes.c:378 src/boxes.c:466 #: src/boxes.c:646 src/boxes.c:728 src/boxes.c:783 src/boxes.c:898 #: src/filegui.c:839 src/find.c:171 src/layout.c:370 src/option.c:143 #: src/wtools.c:289 src/wtools.c:563 vfs/smbfs.c:117 msgid "&Ok" msgstr "확인(&O)" #: gnome/gview.c:136 #, c-format msgid "Offset 0x%08lx" msgstr "옵셋 0x%08lx" #: gnome/gview.c:138 src/view.c:732 #, c-format msgid "Col %d" msgstr "Col %d" #: gnome/gview.c:142 src/view.c:736 #, c-format msgid "%s bytes" msgstr "%s 바이트" #: gnome/gview.c:306 msgid "_Goto line" msgstr "라인 찾아가기(_G)" #: gnome/gview.c:307 msgid "Jump to a specified line number" msgstr "주어진 줄로 점프" #: gnome/gview.c:309 msgid "_Monitor file" msgstr "파일 감시(_M)" #: gnome/gview.c:309 msgid "Monitor file growing" msgstr "파일이 커지는지 감시" #: gnome/gview.c:316 msgid "Regexp search" msgstr "정규표현식 찾기" #: gnome/gview.c:317 msgid "Regular expression search" msgstr "정규표현식 찾기" #: gnome/gview.c:326 msgid "_Wrap" msgstr "_Wrap" #: gnome/gview.c:327 msgid "Wrap the text" msgstr "Wrap the text" #. Can not use this one yet, as it destroys the viewer, need to fix that #: gnome/gview.c:330 msgid "_Parsed view" msgstr "_Parsed view" #: gnome/gview.c:333 msgid "_Formatted" msgstr "_Formatted" #: gnome/gview.c:335 msgid "_Hex" msgstr "십육진(_H)" #: gnome/gview.c:341 msgid "_Search" msgstr "찾기(_S)" #: gnome/gwidget.c:95 msgid "ok" msgstr "확인" #: gnome/gwidget.c:97 msgid "cancel" msgstr "취소" #: gnome/gwidget.c:99 msgid "help" msgstr "도움말" #: gnome/gwidget.c:101 src/file.c:2268 msgid "yes" msgstr "예" #: gnome/gwidget.c:103 src/file.c:2266 msgid "no" msgstr "아니오" #: gnome/gwidget.c:105 msgid "exit" msgstr "종료" #: gnome/gwidget.c:107 msgid "abort" msgstr "중지" #: gnome/gmc-client.c:26 msgid "Could not contact the file manager\n" msgstr "파일 관리자와 접촉할 수 없습니다\n" #: gnome/gmc-client.c:45 msgid "Could not get the desktop\n" msgstr "데스크탑을 얻을 수 없습니다\n" #: gnome/gmc-client.c:142 #, c-format msgid "Unknown arrange type `%s'\n" msgstr "모르는 정렬 형식 `%s'\n" #: gnome/gmc-client.c:206 msgid "Create window showing the specified directory" msgstr "명시된 디렉토리를 보여주기 위해 창 생성" #: gnome/gmc-client.c:206 gnome/gmc-client.c:208 msgid "DIRECTORY" msgstr "디렉토리" #: gnome/gmc-client.c:208 msgid "Rescan the specified directory" msgstr "명시된 디렉토리 다시 읽기" #: gnome/gmc-client.c:210 msgid "Rescan the desktop icons" msgstr "데스크탑 아이콘 다시 읽기" #: gnome/gmc-client.c:212 msgid "Rescan the desktop device icons" msgstr "데스크탑 장치 아이콘 다시 읽기" #: gnome/gmc-client.c:214 msgid "Arrange the desktop icons" msgstr "데스크탑 아이콘 정렬" #: gnome/gmc-client.c:215 msgid "name | type | size | atime | mtime | ctime" msgstr "이름 | 형식 | 크기 | atime | mtime | ctime" #: gnome/gmc-client.c:217 msgid "Close windows whose directories cannot be reached" msgstr "도달할 수 없는 디렉토리의 창 닫기" #. The file-name is printed after the ':' #: gtkedit/edit.c:145 gtkedit/edit.c:314 gtkedit/edit.c:319 gtkedit/edit.c:333 #: gtkedit/edit.c:337 gtkedit/edit.c:369 gtkedit/edit.c:375 gtkedit/edit.c:382 #: gtkedit/edit.c:389 gtkedit/edit.c:395 gtkedit/editcmd.c:298 #: gtkedit/editcmd.c:304 gtkedit/editcmd.c:2030 gtkedit/editwidget.c:1023 #: src/dir.c:386 src/tree.c:682 src/tree.c:688 src/wtools.c:222 msgid " Error " msgstr " 에러 " #: gtkedit/edit.c:145 gtkedit/edit.c:337 gtkedit/edit.c:375 msgid " Failed trying to open file for reading: " msgstr " 파일 열기 실패: " #: gtkedit/edit.c:314 msgid " Error reading from pipe: " msgstr " 파이프 읽기 에러: " #: gtkedit/edit.c:319 msgid " Failed trying to open pipe for reading: " msgstr " 읽을 파이프 열기 실패: " #: gtkedit/edit.c:333 msgid " Error reading file: " msgstr " 파일 읽기 에러: " #: gtkedit/edit.c:382 msgid " Cannot get size/permissions info on file: " msgstr " 파일 크기/허용 정보 얻기 실패: " #: gtkedit/edit.c:389 msgid " Not an ordinary file: " msgstr " 일반 파일 아님: " #: gtkedit/edit.c:395 msgid " File is too large: " msgstr " 파일 크기가 너무 큼: " #: gtkedit/edit.c:396 msgid "" " \n" " Increase edit.h:MAXBUF and recompile the editor. " msgstr "" " \n" " edit.h의 MAXBUF 값을 키운 후 다시 컴파일하십시오. " #: gtkedit/editcmd.c:298 msgid " Error writing to pipe: " msgstr " 파이프 쓰기 에러: " #: gtkedit/editcmd.c:304 msgid " Failed trying to open pipe for writing: " msgstr " 쓰기위한 파이프 열기 실패: " #: gtkedit/editcmd.c:379 msgid "Quick save " msgstr "빠른 저장 " #: gtkedit/editcmd.c:380 msgid "Safe save " msgstr "안전한 저장 " #: gtkedit/editcmd.c:381 msgid "Do backups -->" msgstr "백업 -->" #. NLS for hotkeys? #: gtkedit/editcmd.c:384 gtkedit/editcmd.c:1188 gtkedit/editcmd.c:1232 #: gtkedit/editcmd.c:1317 gtkedit/editcmd.c:2981 gtkedit/editoptions.c:66 #: src/achown.c:71 src/boxes.c:139 src/boxes.c:279 src/boxes.c:376 #: src/boxes.c:464 src/boxes.c:644 src/boxes.c:727 src/boxes.c:781 #: src/chmod.c:114 src/chown.c:79 src/cmd.c:859 src/filegui.c:822 #: src/find.c:171 src/hotlist.c:138 src/hotlist.c:814 src/hotlist.c:911 #: src/layout.c:371 src/learn.c:59 src/option.c:144 src/panelize.c:86 #: src/view.c:406 src/wtools.c:111 src/wtools.c:386 src/wtools.c:561 #: vfs/smbfs.c:117 msgid "&Cancel" msgstr "취소(&C)" #: gtkedit/editcmd.c:390 msgid "Extension:" msgstr "확장자:" #. NLS ? #: gtkedit/editcmd.c:397 msgid " Edit Save Mode " msgstr " 편집 저장 모드 " #: gtkedit/editcmd.c:525 msgid " Save As " msgstr " 새이름으로 저장 " #. Warning message with a query to continue or cancel the operation #: gtkedit/editcmd.c:539 gtkedit/editcmd.c:862 gtkedit/editcmd.c:887 #: gtkedit/editcmd.c:1038 gtkedit/editcmd.c:1135 src/ext.c:315 src/file.c:619 #: src/help.c:318 src/main.c:708 src/screen.c:1451 src/screen.c:2128 #: src/screen.c:2178 src/subshell.c:705 src/subshell.c:731 src/utilunix.c:382 #: src/utilunix.c:386 src/utilunix.c:406 src/utilunix.c:457 vfs/mcfs.c:172 msgid " Warning " msgstr " 경고 " #: gtkedit/editcmd.c:540 msgid " A file already exists with this name. " msgstr " 같은 이름의 파일이 이미 있습니다. " #. Push buttons to over-write the current file, or cancel the operation #: gtkedit/editcmd.c:542 msgid "Overwrite" msgstr "겹쳐쓰기" #: gtkedit/editcmd.c:542 gtkedit/editcmd.c:609 gtkedit/editcmd.c:836 #: gtkedit/editcmd.c:862 gtkedit/editcmd.c:887 gtkedit/editcmd.c:1038 #: gtkedit/editcmd.c:1670 msgid "Cancel" msgstr "취소" #: gtkedit/editcmd.c:561 msgid " Save as " msgstr " 새이름으로 저장 " #: gtkedit/editcmd.c:561 gtkedit/editcmd.c:2770 msgid " Error trying to save file. " msgstr " 파일 저장 에러. " #. This heads the delete macro error dialog box #: gtkedit/editcmd.c:679 gtkedit/editcmd.c:687 gtkedit/editcmd.c:712 msgid " Delete macro " msgstr " 매크로 지우기 " #. 'Open' = load temp file #: gtkedit/editcmd.c:681 msgid " Error trying to open temp file " msgstr " 임시 파일 열기 에러 " #. 'Open' = load temp file #: gtkedit/editcmd.c:689 gtkedit/editcmd.c:750 gtkedit/editcmd.c:818 msgid " Error trying to open macro file " msgstr " 매크로 파일 열기 에러 " #: gtkedit/editcmd.c:694 gtkedit/editcmd.c:702 gtkedit/editcmd.c:738 #: gtkedit/editcmd.c:793 #, c-format msgid "key '%d 0': " msgstr "글쇠 '%d 0': " #: gtkedit/editcmd.c:713 msgid " Error trying to overwrite macro file " msgstr " 매크로 파일 겹쳐쓰기 에러 " #. This heads the 'Macro' dialog box #: gtkedit/editcmd.c:729 msgid " Macro " msgstr " 매크로 " #. Input line for a single key press follows the ':' #: gtkedit/editcmd.c:731 msgid " Press the macro's new hotkey: " msgstr " 새로운 매크로 단축글쇠를 누르십시오: " #. This heads the 'Save Macro' dialog box #: gtkedit/editcmd.c:750 msgid " Save macro " msgstr " 매크로 저장 " #: gtkedit/editcmd.c:760 gtkedit/editcmd.c:767 msgid " Delete Macro " msgstr " 매크로 지우기 " #. This heads the 'Load Macro' dialog box #: gtkedit/editcmd.c:817 msgid " Load macro " msgstr " 매크로 불러오기 " #: gtkedit/editcmd.c:831 gtkedit/editcmd.c:833 msgid " Confirm save file? : " msgstr " 저장하시겠습니까? " #. Buttons to 'Confirm save file' query #: gtkedit/editcmd.c:836 msgid " Save file " msgstr " 파일 저장 " #: gtkedit/editcmd.c:836 gtkedit/editwidget.c:1137 gtkedit/gtkedit.c:1247 #: src/view.c:2077 msgid "Save" msgstr "저장" #: gtkedit/editcmd.c:862 gtkedit/editcmd.c:887 msgid "" " Current text was modified without a file save. \n" " Continue discards these changes. " msgstr "" " 파일이 바뀌었습니다. \n" " 저장 않하고 계속하실 겁니까? " #: gtkedit/editcmd.c:862 gtkedit/editcmd.c:887 gtkedit/editcmd.c:1038 msgid "Continue" msgstr "계속" #: gtkedit/editcmd.c:893 msgid " Load " msgstr " 불러오기 " #: gtkedit/editcmd.c:1038 gtkedit/editcmd.c:1135 msgid " Block is large, you may not be able to undo this action. " msgstr " 구역이 너무 커서 나중에 무를 수 없습니다. " #: gtkedit/editcmd.c:1135 msgid " Continue " msgstr " 계속 " #: gtkedit/editcmd.c:1135 msgid " Cancel " msgstr " 취소 " #: gtkedit/editcmd.c:1190 msgid "o&Ne" msgstr "하나(&N)" #: gtkedit/editcmd.c:1192 src/filegui.c:597 msgid "al&L" msgstr "모두(&L)" #: gtkedit/editcmd.c:1194 src/file.c:2190 src/filegui.c:267 msgid "&Skip" msgstr "건너뜀(&S)" #: gtkedit/editcmd.c:1196 msgid "&Replace" msgstr "바꿈(&R)" #: gtkedit/editcmd.c:1202 gtkedit/editcmd.c:1670 msgid " Replace with: " msgstr " ...로 바꿈: " #: gtkedit/editcmd.c:1206 msgid " Confirm replace " msgstr " 바꾸기 확인 " #: gtkedit/editcmd.c:1236 gtkedit/editcmd.c:1321 msgid "scanf &Expression" msgstr "scanf 표현(&E)" #: gtkedit/editcmd.c:1238 msgid "replace &All" msgstr "모두 바꿈(&A)" #: gtkedit/editcmd.c:1240 msgid "pr&Ompt on replace" msgstr "바꿀 때마다 물어봄(&O)" #: gtkedit/editcmd.c:1242 gtkedit/editcmd.c:1323 msgid "&Backwards" msgstr "뒤로(&B)" #: gtkedit/editcmd.c:1244 gtkedit/editcmd.c:1325 msgid "&Regular expression" msgstr "정규표현식(&R)" #: gtkedit/editcmd.c:1246 gtkedit/editcmd.c:1327 msgid "&Whole words only" msgstr "단어 단위로(&W)" #: gtkedit/editcmd.c:1248 gtkedit/editcmd.c:1329 msgid "case &Sensitive" msgstr "대소문자 구분(&S)" #: gtkedit/editcmd.c:1252 msgid " Enter replacement argument order eg. 3,2,1,4 " msgstr " 인자 순서 입력 (가령: 3,2,1,4): " #: gtkedit/editcmd.c:1256 msgid " Enter replacement string:" msgstr " 바꿀 글월 입력:" #: gtkedit/editcmd.c:1260 gtkedit/editcmd.c:1333 src/view.c:2000 msgid " Enter search string:" msgstr " 찾을 글월 입력:" #. Heads the 'Replace' dialog box #: gtkedit/editcmd.c:1279 gtkedit/editcmd.c:1583 gtkedit/editcmd.c:1670 #: gtkedit/editcmd.c:2209 gtkedit/editcmd.c:2240 gtkedit/editcmd.c:2242 msgid " Replace " msgstr " 바꿈 " #. Heads the 'Search' dialog box #: gtkedit/editcmd.c:1347 gtkedit/editcmd.c:1577 gtkedit/editcmd.c:2308 #: gtkedit/editcmd.c:2310 gtkedit/editcmd.c:2338 src/view.c:1528 #: src/view.c:1627 src/view.c:1750 src/view.c:1968 src/view.c:2000 msgid " Search " msgstr " 찾기 " #. An input line comes after the ':' #: gtkedit/editcmd.c:1401 msgid " Enter search text : " msgstr " 찾을 글월은 : " #: gtkedit/editcmd.c:1408 msgid " Enter replace text : " msgstr " 바꿀 글월은 : " #: gtkedit/editcmd.c:1411 gtkedit/editcmd.c:1412 #, c-format msgid "" "You can enter regexp substrings with %s\n" "(not \\1, \\2 like sed) then use \"Enter...order\"" msgstr "" "You can enter regexp substrings with %s\n" "(not \\1, \\2 like sed) then use \"Enter...order\"" #: gtkedit/editcmd.c:1414 msgid " Enter argument (or substring) order : " msgstr " 인자 (혹은 문자열) 순서 입력 : " #. Tool hint #: gtkedit/editcmd.c:1418 gtkedit/editcmd.c:1419 msgid "" "Enter the order of replacement of your scanf\n" "format specifiers or regexp substrings, eg 3,1,2" msgstr "" "scanf 형식 혹은 정규표현식으로 바꿀 순서를 3,1,2처럼\n" "같이 입력하십시요" #. The following are check boxes #: gtkedit/editcmd.c:1424 msgid " Whole words only " msgstr " 단어 단위로 " #: gtkedit/editcmd.c:1426 msgid " Case sensitive " msgstr " 대소문자 구별 " #: gtkedit/editcmd.c:1429 msgid " Regular expression " msgstr " 정규표현식 " #: gtkedit/editcmd.c:1430 gtkedit/editcmd.c:1431 msgid "" "See the regex man page for how\n" "to compose a regular expression" msgstr "" "regex(정규표현식)을 어떻게 쓸 수 있는지를\n" "알려면 regex 도움말 페이지를 보십시오 " #: gtkedit/editcmd.c:1439 msgid " Backwards " msgstr " 뒤로 " #. Tool hint #: gtkedit/editcmd.c:1441 gtkedit/editcmd.c:1442 msgid "Warning: Searching backward can be slow" msgstr "경고: 뒤로 찾기는 너무 느립니다" #: gtkedit/editcmd.c:1463 msgid " Prompt on replace " msgstr " 바꿀 때마다 물어봄 " #. Tool hint #: gtkedit/editcmd.c:1465 msgid "Ask before making each replacement" msgstr "바꿀 때마다 물어볼까요" #: gtkedit/editcmd.c:1467 msgid " Replace all " msgstr " 모두 바꾸기 " #. Tool hint #: gtkedit/editcmd.c:1469 msgid "Replace repeatedly" msgstr "반복적으로 바꿈" #: gtkedit/editcmd.c:1473 msgid " Bookmarks " msgstr " 책갈피 " #. Tool hint #: gtkedit/editcmd.c:1475 gtkedit/editcmd.c:1476 msgid "Create bookmarks at all lines found" msgstr "" #: gtkedit/editcmd.c:1479 msgid " Scanf expression " msgstr " scanf 표현 " #. Tool hint #: gtkedit/editcmd.c:1481 msgid "" "Allows entering of a C format string,\n" "see the scanf man page" msgstr "" "C 형식 문자열을 입력할 수 있습니다,\n" "scanf 설명서를 보십시오" #. Tool hint #: gtkedit/editcmd.c:1506 msgid "Begin search, Enter" msgstr "찾기 시작, Enter" #: gtkedit/editcmd.c:1507 msgid "Abort this dialog, Esc" msgstr "대화상자 취소, Esc" #: gtkedit/editcmd.c:1670 msgid "Replace" msgstr "바꿈" #: gtkedit/editcmd.c:1670 msgid "Skip" msgstr "건너뜀" #: gtkedit/editcmd.c:1670 msgid "Replace all" msgstr "모두 바꿈" #: gtkedit/editcmd.c:1670 msgid "Replace one" msgstr "하나 바꿈" #: gtkedit/editcmd.c:2030 msgid "" " Invalid regular expression, or scanf expression with to many conversions " msgstr " 이상한 정규표현식 혹은 너무 많이 바꿔야 하는 scanf 표현 " #. "Invalid regexp string or scanf string" #: gtkedit/editcmd.c:2211 msgid " Error in replacement format string. " msgstr " 바꿀 형식 문자열 에러. " #: gtkedit/editcmd.c:2239 #, c-format msgid " %ld replacements made. " msgstr " %ld 개가 바뀌었습니다. " #: gtkedit/editcmd.c:2242 gtkedit/editcmd.c:2310 gtkedit/editcmd.c:2338 msgid " Search string not found. " msgstr " 찾는 문자열이 없습니다. " #. in response to number of bookmarks added because of string being found %d times #: gtkedit/editcmd.c:2307 #, c-format msgid " %d finds made, %d bookmarks added " msgstr "" #. Confirm 'Quit' dialog box #: gtkedit/editcmd.c:2363 gtkedit/editcmd.c:2378 gtkedit/editcmd.c:2381 msgid " Quit " msgstr " 종료 " #: gtkedit/editcmd.c:2364 gtkedit/editcmd.c:2382 msgid "" " Current text was modified without a file save. \n" " Save with exit? " msgstr "" " 현재 문서가 바뀌었습니다. \n" " 저장하고 종료할까요? " #: gtkedit/editcmd.c:2378 msgid " File was modified, Save with exit? " msgstr " 파일이 바뀌었는 데, 저장하고 종료할까요? " #: gtkedit/editcmd.c:2378 msgid "Cancel quit" msgstr "종료 취소" #: gtkedit/editcmd.c:2378 src/cmd.c:249 src/file.c:1878 src/file.c:2249 #: src/filegui.c:603 src/hotlist.c:1035 src/main.c:863 src/screen.c:2165 #: src/subshell.c:706 src/subshell.c:732 src/tree.c:745 src/view.c:406 msgid "&Yes" msgstr "예(&Y)" #: gtkedit/editcmd.c:2378 src/cmd.c:249 src/file.c:1878 src/file.c:2249 #: src/filegui.c:602 src/hotlist.c:1035 src/main.c:863 src/screen.c:2165 #: src/subshell.c:706 src/subshell.c:732 src/tree.c:745 src/view.c:406 msgid "&No" msgstr "아니오(&N)" #: gtkedit/editcmd.c:2382 msgid " &Cancel quit " msgstr " 종료 취소(&C) " #: gtkedit/editcmd.c:2382 msgid " &Yes " msgstr " 예(&Y) " #: gtkedit/editcmd.c:2382 msgid " &No " msgstr " 아니오(&N) " #: gtkedit/editcmd.c:2614 gtkedit/editcmd.c:2689 msgid " Copy to clipboard " msgstr " 클립보드로 복사하기 " #: gtkedit/editcmd.c:2614 gtkedit/editcmd.c:2636 gtkedit/editcmd.c:2689 #: gtkedit/editcmd.c:2702 msgid " Unable to save to file. " msgstr " 파일 저장 실패. " #: gtkedit/editcmd.c:2636 gtkedit/editcmd.c:2702 msgid " Cut to clipboard " msgstr " 클립보드로 오려두기 " #: gtkedit/editcmd.c:2724 gtkedit/editcmd.c:2728 gtkedit/editcmd.c:2733 #: gtkedit/editcmd.c:2736 src/view.c:1915 msgid " Goto line " msgstr " 줄찾기 " #: gtkedit/editcmd.c:2724 gtkedit/editcmd.c:2728 gtkedit/editcmd.c:2733 #: gtkedit/editcmd.c:2736 msgid " Enter line: " msgstr " 줄 번호 입력: " #: gtkedit/editcmd.c:2757 gtkedit/editcmd.c:2770 msgid " Save Block " msgstr " 구역 저장 " #: gtkedit/editcmd.c:2784 msgid " Insert File " msgstr " 파일 끼워넣기 " #: gtkedit/editcmd.c:2797 msgid " Insert file " msgstr " 파일 끼워넣기 " #: gtkedit/editcmd.c:2797 msgid " Error trying to insert file. " msgstr " 파일 끼워넣기 실패 " #. Not essential to translate #: gtkedit/editcmd.c:2819 msgid " Sort block " msgstr " 구역 정렬 " #. Not essential to translate #: gtkedit/editcmd.c:2819 gtkedit/editcmd.c:2873 msgid " You must first highlight a block of text. " msgstr " You must first highlight a block of text. " #: gtkedit/editcmd.c:2826 msgid " Run Sort " msgstr " 정렬 시작 " #. Not essential to translate #: gtkedit/editcmd.c:2828 msgid " Enter sort options (see manpage) separated by whitespace: " msgstr " 공백문자로 구분된 정렬 선택항목 입력: " #: gtkedit/editcmd.c:2839 gtkedit/editcmd.c:2845 msgid " Sort " msgstr " 정렬 " #. Not essential to translate #: gtkedit/editcmd.c:2841 msgid " Error trying to execute sort command " msgstr " 정렬중 오류 발생 " #. Not essential to translate #: gtkedit/editcmd.c:2847 msgid " Sort returned non-zero: " msgstr " Sort returned non-zero: " #. Not essential to translate #: gtkedit/editcmd.c:2871 gtkedit/editcmd.c:2901 msgid " Process block " msgstr " Process block " #. Not essential to translate #: gtkedit/editcmd.c:2903 msgid " Error trying to stat file " msgstr " Error trying to stat file " #: gtkedit/editcmd.c:2974 msgid " Mail " msgstr " 전자우편 " #: gtkedit/editcmd.c:2987 msgid " Copies to" msgstr " Copies to" #: gtkedit/editcmd.c:2991 msgid " Subject" msgstr " 제목" #: gtkedit/editcmd.c:2995 msgid " To" msgstr " To" #: gtkedit/editcmd.c:2997 msgid " mail -s -c " msgstr " mail -s -c " #: gtkedit/editmenu.c:61 msgid " Word wrap " msgstr " Word wrap " #. Not essential to translate #: gtkedit/editmenu.c:63 msgid " Enter line length, 0 for off: " msgstr " 라인 길이를 입력, 0은 off: " #: gtkedit/editmenu.c:74 msgid " About " msgstr " 이 프로그램은 " #: gtkedit/editmenu.c:75 msgid "" "\n" " Cooledit v3.11.5\n" "\n" " Copyright (C) 1996 the Free Software Foundation\n" "\n" " A user friendly text editor written\n" " for the Midnight Commander.\n" msgstr "" "\n" " Cooledit v3.11.5\n" "\n" " Copyright (C) 1996 the Free Software Foundation\n" "\n" " Midnight Commander를 위해 개발된\n" " 사용자와 친근한 텍스트 편집기.\n" #: gtkedit/editmenu.c:124 gtkedit/editmenu.c:140 msgid "&Open/load... C-o" msgstr "열기/불러오기(&O)... C-o" #: gtkedit/editmenu.c:125 msgid "&New C-n" msgstr "새 파일(&N) C-n" #: gtkedit/editmenu.c:127 gtkedit/editmenu.c:143 msgid "&Save F2" msgstr "저장(_S) F3" #: gtkedit/editmenu.c:128 gtkedit/editmenu.c:144 msgid "save &As... F12" msgstr "다른 이름으로 저장(&A)... M-d" #: gtkedit/editmenu.c:130 gtkedit/editmenu.c:146 msgid "&Insert file... F15" msgstr "파일 끼워넣기(&I)... F15" #: gtkedit/editmenu.c:131 msgid "copy to &File... C-f" msgstr "파일로 복사(&F)... C-f" #: gtkedit/editmenu.c:133 gtkedit/editmenu.c:149 msgid "a&Bout... " msgstr "이 프로그램은(&B)... " #: gtkedit/editmenu.c:135 gtkedit/editmenu.c:151 msgid "&Quit F10" msgstr "종료(&Q) F10" #: gtkedit/editmenu.c:141 msgid "&New C-x k" msgstr "새 파일(&N) C-x l" #: gtkedit/editmenu.c:147 msgid "copy to &File... " msgstr "파일로 복사(&F)... " #: gtkedit/editmenu.c:156 gtkedit/editmenu.c:173 msgid "&Toggle Mark F3" msgstr "마크 토글(&T) F3" #: gtkedit/editmenu.c:157 gtkedit/editmenu.c:174 msgid "&Mark Columns S-F3" msgstr "컬럼 마크(&M) S-F3" #: gtkedit/editmenu.c:159 gtkedit/editmenu.c:176 msgid "toggle &Ins/overw Ins" msgstr "삽입/겹침 토글(&I) Ins" #: gtkedit/editmenu.c:161 gtkedit/editmenu.c:178 msgid "&Copy F5" msgstr "복사(&C) F5" #: gtkedit/editmenu.c:162 gtkedit/editmenu.c:179 msgid "&Move F6" msgstr "이동(&M) F6" #: gtkedit/editmenu.c:163 gtkedit/editmenu.c:180 msgid "&Delete F8" msgstr "지우기(&D) F8" #: gtkedit/editmenu.c:165 gtkedit/editmenu.c:182 msgid "&Undo C-u" msgstr "취소(&U) C-u" #: gtkedit/editmenu.c:167 gtkedit/editmenu.c:184 msgid "&Beginning C-PgUp" msgstr "파일 처음(&B) C-PgUp" #: gtkedit/editmenu.c:168 gtkedit/editmenu.c:185 msgid "&End C-PgDn" msgstr "파일 끝(&E) C-PgDn" #: gtkedit/editmenu.c:190 gtkedit/editmenu.c:197 msgid "&Search... F7" msgstr "찾기(&S)... F7" #: gtkedit/editmenu.c:191 gtkedit/editmenu.c:198 msgid "search &Again F17" msgstr "다시 찾기(&A) F17" #: gtkedit/editmenu.c:192 gtkedit/editmenu.c:199 msgid "&Replace... F4" msgstr "바꾸기(&R)... F4" #: gtkedit/editmenu.c:204 gtkedit/editmenu.c:227 msgid "&Goto line... M-l" msgstr "라인 찾아가기(&G)... M-l" #: gtkedit/editmenu.c:205 gtkedit/editmenu.c:228 msgid "goto matching &Bracket M-b" msgstr "" #: gtkedit/editmenu.c:207 gtkedit/editmenu.c:230 msgid "insert &Literal... C-q" msgstr "Literal 입력(&L) C-q" #: gtkedit/editmenu.c:209 gtkedit/editmenu.c:232 msgid "&Refresh screen C-l" msgstr "화면 갱신(&R) C-l" #: gtkedit/editmenu.c:211 gtkedit/editmenu.c:234 msgid "&Start record macro C-r" msgstr "매크로 저장 시작(&S) C-r" #: gtkedit/editmenu.c:212 gtkedit/editmenu.c:235 msgid "&Finish record macro... C-r" msgstr "매크로 저장 끝(&F) C-r" #: gtkedit/editmenu.c:213 msgid "&Execute macro... C-a, KEY" msgstr "매크로 실행(&E)... C-a, KEY" #: gtkedit/editmenu.c:214 gtkedit/editmenu.c:237 msgid "delete macr&O... " msgstr "매크로 삭제(&O)... " #: gtkedit/editmenu.c:216 gtkedit/editmenu.c:239 msgid "insert &Date/time " msgstr "날짜/시간 삽입(&D) " #: gtkedit/editmenu.c:218 gtkedit/editmenu.c:241 msgid "format p&Aragraph M-p" msgstr "format p&Aragraph M-p" #: gtkedit/editmenu.c:219 msgid "'ispell' s&Pell check C-p" msgstr "'ispell' 철자 검사(&P) C-p" #: gtkedit/editmenu.c:220 gtkedit/editmenu.c:243 msgid "sor&T... M-t" msgstr "정렬(&T) M-t" #: gtkedit/editmenu.c:221 gtkedit/editmenu.c:244 msgid "'indent' &C Formatter F19" msgstr "'indent' &C Formatter F19" #: gtkedit/editmenu.c:222 msgid "&Mail... " msgstr "전자우편(&M)... " #: gtkedit/editmenu.c:236 msgid "&Execute macro... C-x e, KEY" msgstr "매크로 실행(&E)... C-x e, KEY" #: gtkedit/editmenu.c:242 msgid "'ispell' s&Pell check M-$" msgstr "'ispell' 철자 검사(&P) M-$" #: gtkedit/editmenu.c:251 gtkedit/editmenu.c:260 msgid "&General... " msgstr "일반(&G)... " #: gtkedit/editmenu.c:252 gtkedit/editmenu.c:261 msgid "&Save mode..." msgstr "모드 저장(&S)..." #: gtkedit/editmenu.c:254 gtkedit/editmenu.c:263 src/main.c:1355 msgid "&Layout..." msgstr "배치(&L)..." #. The following are menu options. Do not change the key bindings (eg. C-o) and preserve '\t' #: gtkedit/editmenu.c:273 gtkedit/editmenu.c:282 gtkedit/editmenu.c:399 #: src/chmod.c:164 src/chown.c:130 msgid " File " msgstr " 파일 " #: gtkedit/editmenu.c:274 gtkedit/editmenu.c:283 gtkedit/editmenu.c:415 msgid " Edit " msgstr " 편집 " #: gtkedit/editmenu.c:275 gtkedit/editmenu.c:284 msgid " Sear/Repl " msgstr " 찾기/바꿈 " #: gtkedit/editmenu.c:276 gtkedit/editmenu.c:285 gtkedit/editmenu.c:455 msgid " Command " msgstr " 명령 " #: gtkedit/editmenu.c:277 gtkedit/editmenu.c:286 msgid " Options " msgstr " 선택항목 " #: gtkedit/editmenu.c:400 msgid "Open...\tC-o" msgstr "열기...\tC-o" #: gtkedit/editmenu.c:401 msgid "New\tC-n" msgstr "새 글\tC-n" #: gtkedit/editmenu.c:403 msgid "Save\tF2" msgstr "저장\tF2" #: gtkedit/editmenu.c:404 msgid "Save as...\tF12" msgstr "새이름으로 저장\tF12" #: gtkedit/editmenu.c:406 msgid "Insert file...\tF15" msgstr "파일 끼워넣기...\tF15" #: gtkedit/editmenu.c:407 msgid "Copy to file...\tC-f" msgstr "파일로 복사...\tC-f" #. Tool hint #: gtkedit/editmenu.c:410 msgid "Disk operations and file indexing/searching" msgstr "디스크 동작과 파일 색인/찾기" #: gtkedit/editmenu.c:416 msgid "Toggle mark\tF3" msgstr "마크 토글\tF3" #: gtkedit/editmenu.c:417 msgid "Toggle mark columns\tC-b" msgstr "컬럼 마크 토글\tC-b" #: gtkedit/editmenu.c:419 msgid "Toggle book mark\tC-M-Ins" msgstr "책갈피 토글\tC-M-Ins" #: gtkedit/editmenu.c:420 msgid "Previous book mark\tC-M-Up" msgstr "이전 책갈피\tC-M-Up" #: gtkedit/editmenu.c:421 msgid "Next book mark\tC-M-Down" msgstr "다음 책갈피\tC-M-Down" #: gtkedit/editmenu.c:422 msgid "Flush book marks" msgstr "모든 책갈피 삭제" #: gtkedit/editmenu.c:424 msgid "Toggle insert/overwrite\tIns" msgstr "삽입/겹침 토글\tIns" #: gtkedit/editmenu.c:426 msgid "Copy block to cursor\tF5" msgstr "블럭을 커서위치로 복사\tF5" #: gtkedit/editmenu.c:427 msgid "Move block to cursor\tF6" msgstr "블럭을 커서위치로 이동\tF6" #: gtkedit/editmenu.c:428 msgid "Delete block\tF8/C-Del" msgstr "블럭 삭제\tF8/C-Del" #: gtkedit/editmenu.c:430 msgid "Copy block to clipbrd\tC-Ins" msgstr "블럭을 클립보드로 복사\tC-Ins" #: gtkedit/editmenu.c:431 msgid "Cut block to clipbrd\tS-Del" msgstr "블럭을 클립보드로 오려두기\tS-Del" #: gtkedit/editmenu.c:432 msgid "Paste block from clipbrd\tS-Ins" msgstr "클립보드에서 블럭 붙이기\tS-Ins" #: gtkedit/editmenu.c:433 msgid "Selection history\tM-Ins" msgstr "선택 히스토리\tM-Ins" #: gtkedit/editmenu.c:435 msgid "Undo\tC-BackSpace" msgstr "취소\tC-BackSpace" #. Tool hint #: gtkedit/editmenu.c:438 msgid "Manipulating blocks of text" msgstr "텍스트 블럭 조작" #: gtkedit/editmenu.c:443 msgid " Srch/Replce " msgstr " 찾기/바꿈 " #: gtkedit/editmenu.c:444 msgid "Search...\tF7" msgstr "찾기...\tF7" #: gtkedit/editmenu.c:445 msgid "Search again\tF17" msgstr "다시 찾기\tF17" #: gtkedit/editmenu.c:446 msgid "Replace...\tF4" msgstr "바꿈...\tF4" #: gtkedit/editmenu.c:447 msgid "Replace again\tF14" msgstr "모두 바꿈\tF14" #. Tool hint #: gtkedit/editmenu.c:450 msgid "Search for and replace text" msgstr "찾아서 바꿀 문자열" #: gtkedit/editmenu.c:456 msgid "Goto line...\tM-l" msgstr "라인 찾아가기...\tM-l" #: gtkedit/editmenu.c:457 msgid "Goto matching bracket\tM-b" msgstr "" #: gtkedit/editmenu.c:459 msgid "Start record macro\tC-r" msgstr "매크로 저장 시작\tC-r" #: gtkedit/editmenu.c:460 msgid "Finish record macro...\tC-r" msgstr "매크로 저장 끝...\tC-r" #: gtkedit/editmenu.c:461 msgid "Execute macro...\tC-a, KEY" msgstr "매크로 실행...\tC-a, KEY" #: gtkedit/editmenu.c:462 msgid "Delete macro...\t" msgstr "매크로 삭제...\t" #: gtkedit/editmenu.c:464 msgid "Insert date/time\tC-d" msgstr "날짜/시간 삽입\tC-d" #: gtkedit/editmenu.c:465 msgid "Format paragraph\tM-p" msgstr "Format paragraph\tM-p" #: gtkedit/editmenu.c:467 msgid "Refresh display\tC-l" msgstr "화면 갱신\tC-l" #. Tool hint #: gtkedit/editmenu.c:470 msgid "Macros and internal commands" msgstr "매크로와 내장 명령" #: gtkedit/editoptions.c:36 msgid "Intuitive" msgstr "직관적" #: gtkedit/editoptions.c:36 msgid "Emacs" msgstr "이맥스" #: gtkedit/editoptions.c:39 msgid "None" msgstr "없음" #: gtkedit/editoptions.c:39 msgid "Dynamic paragraphing" msgstr "Dynamic paragraphing" #: gtkedit/editoptions.c:39 msgid "Type writer wrap" msgstr "Type writer wrap" #. 2 #: gtkedit/editoptions.c:72 msgid "Word wrap line length : " msgstr "Word wrap line length : " #. 4 #: gtkedit/editoptions.c:78 msgid "Tab spacing : " msgstr "탭 간격 : " #: gtkedit/editoptions.c:86 msgid "synta&X highlighting" msgstr "synta&X highlighting" #. 7 #: gtkedit/editoptions.c:92 msgid "confir&M before saving" msgstr "저장 전 확인(&M)" #. 8 #: gtkedit/editoptions.c:95 msgid "fill tabs with &Spaces" msgstr "탭을 공백으로 채움(&S)" #. 9 #: gtkedit/editoptions.c:98 msgid "&Return does autoindent" msgstr "리턴키 입력시 autoindent(&R)" #. 10 #: gtkedit/editoptions.c:101 msgid "&Backspace through tabs" msgstr "백스페이스에 탭간격 사용(&B)" #. 11 #: gtkedit/editoptions.c:104 msgid "&Fake half tabs" msgstr "&Fake half tabs" #. 13 #: gtkedit/editoptions.c:110 msgid "Wrap mode" msgstr "Wrap 모드" #. 15 #: gtkedit/editoptions.c:116 msgid "Key emulation" msgstr "글쇠 에뮬레이션" #: gtkedit/editoptions.c:157 msgid " Editor options " msgstr " 편집기 선택항목 " #. Not essential to translate #: gtkedit/editwidget.c:323 msgid "Error initialising editor.\n" msgstr "Error initialising editor.\n" #: gtkedit/editwidget.c:1136 gtkedit/gtkedit.c:1246 src/help.c:806 #: src/main.c:1721 src/screen.c:2394 src/screen.c:2424 src/tree.c:1008 #: src/view.c:2070 msgid "Help" msgstr "도움말" #: gtkedit/editwidget.c:1138 gtkedit/gtkedit.c:1248 msgid "Mark" msgstr "선택" #: gtkedit/editwidget.c:1139 msgid "Replac" msgstr "바꿈" #: gtkedit/editwidget.c:1145 src/main.c:1723 msgid "PullDn" msgstr "풀다운" #. gtk_edit_menu #: gtkedit/editwidget.c:1146 gtkedit/gtkedit.c:1256 src/help.c:818 #: src/main.c:1724 src/view.c:2072 src/view.c:2094 msgid "Quit" msgstr "종료" #: gtkedit/gtkedit.c:65 msgid "&Dismiss" msgstr "취소(&D)" #: gtkedit/gtkedit.c:66 msgid " Enter file name: " msgstr " 파일명 입력: " #: gtkedit/gtkedit.c:111 msgid "The Quick Brown Fox Jumps Over The Lazy Dog" msgstr "The Quick Brown Fox Jumps Over The Lazy Dog" #: gtkedit/gtkedit.c:802 msgid "" "gtkedit.c: HOME environment variable not set and no passwd entry - aborting\n" msgstr "" "gtkedit.c: HOME 환경변수가 설정되지 않았고, passwd 파일에도 없음 - 중단\n" #: gtkedit/gtkedit.c:1246 msgid "Interactive help browser" msgstr "쌍방향 도움말 브라우져" #: gtkedit/gtkedit.c:1247 msgid "Save to current file name" msgstr "현재 파일명으로 저장" #: gtkedit/gtkedit.c:1248 msgid "Toggle In/Off invisible marker to highlight text" msgstr "Toggle In/Off invisible marker to highlight text" #: gtkedit/gtkedit.c:1249 msgid "Replc" msgstr "바꿈" #: gtkedit/gtkedit.c:1249 msgid "Find and replace strings/regular expressions" msgstr "문자열/정규표현식을 찾아서 바꾸기" #: gtkedit/gtkedit.c:1250 msgid "Copy highlighted block to cursor position" msgstr "선택된 블럭을 커서위치로 복사" #: gtkedit/gtkedit.c:1252 msgid "Move highlighted block to cursor position" msgstr "선택된 블럭을 커서위치로 이동" #: gtkedit/gtkedit.c:1253 msgid "Find" msgstr "찾기" #: gtkedit/gtkedit.c:1253 msgid "Find strings/regular expressions" msgstr "문자열/정규표현식 찾기" #: gtkedit/gtkedit.c:1254 msgid "Dlete" msgstr "지우기" #: gtkedit/gtkedit.c:1254 msgid "Delete highlighted text" msgstr "선택된 텍스트 삭제" #: gtkedit/gtkedit.c:1255 src/main.c:1722 src/screen.c:2395 src/screen.c:2425 msgid "Menu" msgstr "메뉴" #: gtkedit/gtkedit.c:1255 msgid "Pull down menu" msgstr "풀다운 메뉴" #: gtkedit/gtkedit.c:1256 msgid "Exit editor" msgstr "편집기 종료" #: gtkedit/gtkedit.c:1290 msgid "Clear the edit buffer" msgstr "편집 버퍼 지우기" #: gtkedit/gtkedit.c:1295 msgid "Insert File" msgstr "파일 끼워넣기" #: gtkedit/gtkedit.c:1295 msgid "Insert text from a file" msgstr "파일에서 글월 끼워넣기" #: gtkedit/gtkedit.c:1297 msgid "Copy to file" msgstr "파일로 복사" #: gtkedit/gtkedit.c:1297 msgid "copy a block to a file" msgstr "블럭을 파일로 복사" #: gtkedit/gtkedit.c:1337 msgid "Search/Replace" msgstr "찾기/바꿈" #: gtkedit/syntax.c:1069 gtkedit/syntax.c:1078 gtkedit/syntax.c:1087 #: gtkedit/syntax.c:1096 msgid " Spelling Message " msgstr " Spelling Message " #: gtkedit/syntax.c:1069 msgid "" " Fail trying to open ispell program. \n" " Check that it is in your path and works with the -a option. \n" " Alternatively, disable spell checking from the Options menu. " msgstr "" " ispell 프로그램을 열 수 없습니다. \n" " 경로에 있고, -a 옵션이 동작하는 지를 확인하시기 바랍니다. \n" " 그렇지 않으면 옵션 메뉴에서 spell 확인기능을 끄십시요. " #: gtkedit/syntax.c:1078 msgid "" " Fail trying to open ispell pipes. \n" " Check that it is in your path and works with the -a option. \n" " Alternatively, disable spell checking from the Options menu. " msgstr "" " ispell 파이프를 열 수 없습니다. \n" " 경로에 있고, -a 옵션이 동작하는 지를 확인하시기 바랍니다. \n" " 그렇지 않으면 옵션 메뉴에서 spell 확인기능을 끄십시요. " #: gtkedit/syntax.c:1087 msgid "" " Fail trying to read ispell pipes. \n" " Check that it is in your path and works with the -a option. \n" " Alternatively, disable spell checking from the Options menu. " msgstr "" " ispell 파이프를 읽을 수 없습니다. \n" " 경로에 있고, -a 옵션이 동작하는 지를 확인하시기 바랍니다. \n" " 그렇지 않으면 옵션 메뉴에서 spell 확인기능을 끄십시요. " #: gtkedit/syntax.c:1096 msgid "" " Error reading from ispell. \n" " Ispell is being restarted. " msgstr "" " ispell에서 읽기 에러가 생겼습니다. \n" " Ispell이 다시 시작될 것입니다. " #: gtkedit/syntax.c:1369 gtkedit/syntax.c:1371 msgid " Load Syntax Rules " msgstr " 구문 규칙 읽어오기 " #: gtkedit/syntax.c:1369 gtkedit/syntax.c:1371 msgid "" " Your syntax rule file is outdated \n" " A new rule file is being installed. \n" " Your old rule file has been saved with a .OLD extension. " msgstr "" " 당신의 구문 규칙 파일은 오래되었습니다 \n" " 새로운 규칙 파일이 인스톨될 것입니다. \n" " 오래된 규칙 파일을 .OLD 확장자를 붙여 보관합니다. " #: gtkedit/syntax.c:1519 gtkedit/syntax.c:1526 msgid " Load syntax file " msgstr " 구문 파일 읽어오기 " #: gtkedit/syntax.c:1519 msgid " File access error " msgstr " 파일 액세스 에러 " #: gtkedit/syntax.c:1525 #, c-format msgid " Error in file %s on line %d " msgstr " 파일 %s의 %d 라인에 에러 " #: src/achown.c:72 src/chmod.c:115 src/chown.c:80 msgid "&Set" msgstr "설정(&S)" #: src/achown.c:73 msgid "S&kip" msgstr "건너뜀(&k)" #: src/achown.c:74 src/chmod.c:119 src/chown.c:83 msgid "Set &all" msgstr "모두 설정(&a)" #: src/achown.c:362 src/achown.c:369 msgid "owner" msgstr "소유자" #: src/achown.c:364 src/achown.c:371 msgid "group" msgstr "집단" #: src/achown.c:366 msgid "other" msgstr "기타" #: src/achown.c:374 msgid "On" msgstr "On" #: src/achown.c:376 msgid "Flag" msgstr "Flag" #: src/achown.c:383 #, c-format msgid "%6d of %d" msgstr "%6d of %d" #: src/achown.c:391 msgid " Chown advanced command " msgstr " 고급 chown 명령 " #: src/achown.c:629 src/achown.c:645 src/achown.c:708 src/chmod.c:285 #: src/chmod.c:370 #, c-format msgid "" " Couldn't chmod \"%s\" \n" " %s " msgstr "" " \"%s\"의 모드를 바꿀 수 없습니다 \n" " %s " #: src/achown.c:634 src/achown.c:649 src/achown.c:712 src/chown.c:223 #: src/chown.c:345 #, c-format msgid "" " Couldn't chown \"%s\" \n" " %s " msgstr "" " \"%s\"의 소유자를 바꿀 수 없습니다 \n" " %s " #: src/achown.c:666 src/achown.c:670 src/chmod.c:320 src/chmod.c:324 #: src/chown.c:260 src/chown.c:264 src/panelize.c:300 src/user.c:621 msgid " Oops... " msgstr " 으윽... " #: src/achown.c:667 msgid " I can't run the Advanced Chown command on an extfs " msgstr " extfs에서는 고급 chown 명령을 실행할 수 없습니다 " #: src/achown.c:671 msgid " I can't run the Advanced Chown command on a tarfs " msgstr " tarfs에서는 고급 chown 명령을 실행할 수 없습니다 " #: src/background.c:181 msgid "Background process:" msgstr "Background 프로세스:" #: src/background.c:287 src/file.c:2189 msgid " Background process error " msgstr " Background 프로세스 에러 " #: src/background.c:294 msgid " Child died unexpectedly " msgstr " 예기치 않은 자식(child) 프로세스의 죽음 " #: src/background.c:296 msgid " Unknown error in child " msgstr " 자식(child) 프로세스에서 모르는 오류 발생 " #: src/background.c:311 msgid " Background protocol error " msgstr " Background 프로토콜 에러 " #: src/background.c:312 msgid "" " Background process sent us a request for more arguments \n" " than we can handle. \n" msgstr "" " Background process가 우리가 처리할 수 있는 것 보다 많은 \n" " 인자를 요구합니다. \n" #: src/boxes.c:63 msgid " Listing mode " msgstr " 목록보기 설정 " #: src/boxes.c:68 msgid "&Full file list" msgstr "전체 보여주기(&F)" #: src/boxes.c:69 msgid "&Brief file list" msgstr "간단히 보여주기(&B)" #: src/boxes.c:70 msgid "&Long file list" msgstr "길게 보여주기(&L)" #: src/boxes.c:71 msgid "&User defined:" msgstr "사용자 정의(&U):" #: src/boxes.c:72 msgid "&Icon view" msgstr "아이콘 보기(&I)" #: src/boxes.c:137 msgid "user &Mini status" msgstr "미니 상태바(&M)" #: src/boxes.c:186 msgid "Listing mode" msgstr "목록보기 설정" #: src/boxes.c:280 msgid "&Reverse" msgstr "반대로(&R)" #: src/boxes.c:281 msgid "case sensi&tive" msgstr "대소문자 구분(&t)" #: src/boxes.c:282 msgid "Sort order" msgstr "정렬 순서" #: src/boxes.c:381 msgid " confirm &Exit " msgstr " 종료 확인(&E) " #: src/boxes.c:383 msgid " confirm e&Xecute " msgstr " 실행 확인(&X) " #: src/boxes.c:385 msgid " confirm o&Verwrite " msgstr " 덮어쓰기 확인(&V) " #: src/boxes.c:387 msgid " confirm &Delete " msgstr " 지우기 확인(&D) " #: src/boxes.c:393 msgid " Confirmation " msgstr " 확인 " #: src/boxes.c:461 msgid "Full 8 bits output" msgstr "8 bits 출력" #: src/boxes.c:461 msgid "ISO 8859-1" msgstr "ISO 8859-1" #: src/boxes.c:461 msgid "7 bits" msgstr "7 비트" #: src/boxes.c:468 msgid "F&ull 8 bits input" msgstr "8 비트 입력(&u)" #: src/boxes.c:476 msgid " Display bits " msgstr " 출력 비트 " #: src/boxes.c:651 msgid "&Always use ftp proxy" msgstr "항상 FTP proxy 사용(&A)" #: src/boxes.c:653 msgid "sec" msgstr "초" #: src/boxes.c:657 msgid "ftpfs directory cache timeout:" msgstr "ftpfs 캐쉬 타임아웃:" #: src/boxes.c:661 msgid "ftp anonymous password:" msgstr "ftp anonymous 비밀번호:" #: src/boxes.c:668 msgid "Timeout for freeing VFSs:" msgstr "Timeout for freeing VFSs:" #: src/boxes.c:674 msgid " Virtual File System Setting " msgstr " 가상 파일 체계 설정 " #: src/boxes.c:740 msgid "Quick cd" msgstr "Quick cd" #. want cd like completion #: src/boxes.c:745 msgid "cd" msgstr "cd" #: src/boxes.c:796 msgid "Symbolic link" msgstr "심볼릭링크" #: src/boxes.c:833 msgid "Running " msgstr "실행중 " #: src/boxes.c:834 src/find.c:719 src/find.c:960 msgid "Stopped" msgstr "멈춤" #: src/boxes.c:895 msgid "&Stop" msgstr "멈춤(&S)" #: src/boxes.c:896 msgid "&Resume" msgstr "계속(&R)" #: src/boxes.c:897 msgid "&Kill" msgstr "죽임(&K)" #: src/boxes.c:936 msgid "Background Jobs" msgstr "Background Jobs" #: src/chmod.c:95 msgid "execute/search by others" msgstr "다른 사용자의 실행/찾기" #: src/chmod.c:96 msgid "write by others" msgstr "다른 사용자의 쓰기" #: src/chmod.c:97 msgid "read by others" msgstr "다른 사용자의 읽기" #: src/chmod.c:98 msgid "execute/search by group" msgstr "집단 구성원의 실행/찾기" #: src/chmod.c:99 msgid "write by group" msgstr "집단 구성원의 쓰기" #: src/chmod.c:100 msgid "read by group" msgstr "집단 구성원의 읽기" #: src/chmod.c:101 msgid "execute/search by owner" msgstr "소유자의 실행/찾기" #: src/chmod.c:102 msgid "write by owner" msgstr "소유자의 쓰기" #: src/chmod.c:103 msgid "read by owner" msgstr "소유자의 읽기" #: src/chmod.c:104 msgid "sticky bit" msgstr "sticky 비트" #: src/chmod.c:105 msgid "set group ID on execution" msgstr "실행시 집단 ID 설정" #: src/chmod.c:106 msgid "set user ID on execution" msgstr "실행시 사용자 ID 설정" #: src/chmod.c:116 msgid "C&lear marked" msgstr "선택 해제(&l)" #: src/chmod.c:117 msgid "S&et marked" msgstr "선택(&e)" #: src/chmod.c:118 msgid "&Marked all" msgstr "모두 선택(&M)" #: src/chmod.c:152 msgid "Permissions (Octal)" msgstr "허용 (8진수)" #: src/chmod.c:154 msgid "Owner name" msgstr "사용자 이름" #: src/chmod.c:156 msgid "Group name" msgstr "집단 이름" #: src/chmod.c:160 msgid " Chmod command " msgstr " Chmod 명령 " #: src/chmod.c:162 src/chown.c:120 msgid " Permission " msgstr " 허용 " #: src/chmod.c:169 msgid "Use SPACE to change" msgstr "바꿀려면 SPACE 사용" #: src/chmod.c:171 msgid "an option, ARROW KEYS" msgstr "선택항목, 화살표 글쇠" #: src/chmod.c:173 msgid "to move between options" msgstr "선택항목간에 이동하려면" #: src/chmod.c:175 msgid "and T or INS to mark" msgstr "선택하려면 T 혹은 INS" #: src/chmod.c:233 msgid "Chmod command" msgstr "Chmod 명령" #: src/chmod.c:321 msgid " I can't run the Chmod command on an extfs " msgstr " extfs에서는 chmod 명령을 실행 못합니다 " #: src/chmod.c:325 msgid " I can't run the Chmod command on a tarfs " msgstr " tarfs에서는 chmod 명령을 실행 못합니다 " #: src/chown.c:81 msgid "Set &users" msgstr "사용자 설정(&u)" #: src/chown.c:82 msgid "Set &groups" msgstr "집단 설정(&g)" #: src/chown.c:112 msgid " Name " msgstr " 이름 " #: src/chown.c:114 msgid " Owner name " msgstr " 소유자 이름 " #: src/chown.c:116 src/chown.c:128 msgid " Group name " msgstr " 집단 이름 " #: src/chown.c:118 msgid " Size " msgstr " 크기 " #: src/chown.c:124 msgid " Chown command " msgstr " Chown 명령 " #: src/chown.c:126 msgid " User name " msgstr " 사용자 이름 " #: src/chown.c:192 msgid "" msgstr "<모르는 사용자>" #. add fields for unknown names (numbers) #: src/chown.c:193 msgid "" msgstr "<모르는 집단>" #: src/chown.c:261 msgid " I can't run the Chown command on an extfs " msgstr " extfs에서는 chown 명령을 실행 못합니다 " #: src/chown.c:265 msgid " I can't run the Chown command on a tarfs " msgstr " tarfs에서는 chown 명령을 실행 못합니다 " #: src/cmd.c:198 #, c-format msgid " Can not fetch a local copy of %s " msgstr " 원격지 파일 %s를 로컬로 가져올 수 없습니다 " #: src/cmd.c:248 msgid " CD " msgstr " CD " #: src/cmd.c:248 msgid "Files tagged, want to cd?" msgstr "선택된 파일이 있는 데, 그래도 디렉토리을 바꿀까요?" #: src/cmd.c:254 src/cmd.c:713 src/cmd.c:732 msgid "Could not change directory" msgstr "디렉토리을 바꿀 수 없습니다" #: src/cmd.c:283 msgid " View file " msgstr " 파일 보기 " #: src/cmd.c:283 msgid " Filename:" msgstr " 파일명:" #: src/cmd.c:300 msgid " Filtered view " msgstr " 필터로 보기 " #: src/cmd.c:300 msgid " Filter command and arguments:" msgstr " 필터 명령 및 인자:" #: src/cmd.c:388 msgid "Create a new Directory" msgstr "새로운 디렉토리을 생성" #: src/cmd.c:388 msgid " Enter directory name:" msgstr " 디렉토리 이름 입력:" #: src/cmd.c:449 msgid " Filter " msgstr " 필터 " #: src/cmd.c:449 msgid " Set expression for filtering filenames" msgstr " 필터링할 파일명 설정 " #: src/cmd.c:515 msgid " Select " msgstr " 선택 " #: src/cmd.c:567 msgid " Unselect " msgstr " 선택해제 " #: src/cmd.c:640 msgid "Extension file edit" msgstr "Extension 파일 수정" #: src/cmd.c:641 msgid " Which extension file you want to edit? " msgstr " 수정하기를 원하는 extension 파일은? " #: src/cmd.c:642 msgid "&User" msgstr "사용자(&U)" #: src/cmd.c:642 src/cmd.c:668 msgid "&System Wide" msgstr "체계 전체(&S)" #: src/cmd.c:665 msgid "Menu file edit" msgstr "메뉴 파일 수정" #: src/cmd.c:666 msgid " Which menu file will you edit? " msgstr " 수정하기를 원하는 메뉴 파일은? " #: src/cmd.c:668 msgid "&Local" msgstr "로컬(&L)" #: src/cmd.c:668 msgid "&Home" msgstr "홈(&H)" #: src/cmd.c:858 msgid " Compare directories " msgstr " 디렉토리 비교 " #: src/cmd.c:858 msgid " Select compare method: " msgstr " 비교 방법 선택: " #: src/cmd.c:859 msgid "&Quick" msgstr "빠르게(&Q)" #: src/cmd.c:859 msgid "&Size only" msgstr "크기로만(&S)" #: src/cmd.c:859 msgid "&Thorough" msgstr "자세히(&T)" #: src/cmd.c:869 msgid " Both panels should be on the listing view mode to use this command " msgstr " 이 명령을 사용하려면 양쪽 판텔이 모두 보여야 합니다 " #: src/cmd.c:883 msgid " The command history is empty " msgstr " 명령 히스토리가 비었습니다 " #: src/cmd.c:889 msgid " Command history " msgstr " 명령 히스토리 " #: src/cmd.c:931 msgid "" " Not an xterm or Linux console; \n" " the panels cannot be toggled. " msgstr "" " xterm도 아니고 리눅스 콘솔도 아니고; \n" " 패널을 서로 바꿀 수 없습니다. " #: src/cmd.c:970 msgid "Type `exit' to return to the Midnight Commander" msgstr "The Midnight Commander로 돌아가려면 'exit'을 입력하십시오" #: src/cmd.c:1025 #, c-format msgid "" " Couldn't stat %s \n" " %s " msgstr "" " %s 파일정보를 얻을 수 없어요 \n" " %s " #: src/cmd.c:1034 src/cmd.c:1036 msgid " Link " msgstr " 링크 " #: src/cmd.c:1035 src/cmd.c:1174 src/file.c:1704 msgid " to:" msgstr " 대상:" #: src/cmd.c:1046 #, c-format msgid " link: %s " msgstr " 링크: %s " #: src/cmd.c:1079 #, c-format msgid " symlink: %s " msgstr " 심볼릭링크: %s " #: src/cmd.c:1133 #, c-format msgid " Symlink `%s' points to: " msgstr " Symlink `%s' points to: " #: src/cmd.c:1138 msgid " Edit symlink " msgstr " 심볼릭링크 수정 " #: src/cmd.c:1143 #, c-format msgid " edit symlink, unable to remove %s: %s " msgstr " 심볼릭링크 편집, %s 삭제 불가: %s " #: src/cmd.c:1147 #, c-format msgid " edit symlink: %s " msgstr " 심볼릭링크 수정: %s " #: src/cmd.c:1174 msgid " Link symbolically " msgstr " Link symbolically " #: src/cmd.c:1175 msgid " Relative symlink " msgstr " Relative symlink " #: src/cmd.c:1186 #, c-format msgid " relative symlink: %s " msgstr " relative symlink: %s " #: src/cmd.c:1336 msgid " Enter machine name (F1 for details): " msgstr " 호스트 이름 입력 (도움말 F1): " #: src/cmd.c:1363 #, c-format msgid " Could not chdir to %s " msgstr " %s로 디렉토리을 바꿀 수 없음 " #: src/cmd.c:1370 src/widget.c:1163 msgid " Link to a remote machine " msgstr " 원격 호스트에 연결 " #: src/cmd.c:1376 src/widget.c:1164 msgid " FTP to machine " msgstr " FTP 연결 " #: src/cmd.c:1382 src/widget.c:1165 msgid " SMB link to machine " msgstr " SMB 연결 " #: src/cmd.c:1392 msgid " Socket source routing setup " msgstr " 소켓 소스 라우팅 설정 " #: src/cmd.c:1393 msgid " Enter host name to use as a source routing hop: " msgstr " 원천 라우팅 홉을 사용하기 위한 호스트 이름: " #: src/cmd.c:1401 msgid " Host name " msgstr " 호스트 이름 " #: src/cmd.c:1401 msgid " Error while looking up IP address " msgstr " IP 주소 찾는 중 오류 발생 " #: src/cmd.c:1412 msgid " Undelete files on an ext2 file system " msgstr " ext2 파일체계에서 파일 되살림 " #: src/cmd.c:1413 msgid "" " Enter device (without /dev/) to undelete\n" " files on: (F1 for details)" msgstr "" " 파일을 복구하기 위해 '/dev/'를 생략한 디바이스명\n" " 입력: (자세히 알기 원하면 F1)" #: src/cmd.c:1463 msgid " Setup saved to ~/" msgstr " Setup saved to ~/" #: src/cmd.c:1468 msgid " Setup " msgstr " 환경설정 " #: src/command.c:170 #, c-format msgid "" " Can't chdir to '%s' \n" " %s " msgstr "" " '%s'로 디렉토리 바꿀 수 없음 \n" " %s " #: src/command.c:198 msgid " You can not execute commands on non-local filesystems" msgstr " 가상 파일 체계 디렉토리에서는 명령을 실행할 수 없어요 " #: src/dialog.c:56 msgid "" "\n" "\n" "\n" "refresh stack underflow!\n" "\n" "\n" msgstr "" "\n" "\n" "\n" "재생 스택 아래넘침\n" "\n" "\n" #: src/dir.c:61 msgid "&Unsorted" msgstr "정렬 않함(&U)" #: src/dir.c:62 msgid "&Name" msgstr "이름(&N)" #: src/dir.c:63 msgid "&Extension" msgstr "확장자(&E)" #: src/dir.c:64 msgid "&Modify time" msgstr "수정 시간(&M)" #: src/dir.c:65 msgid "&Access time" msgstr "접근 시간(&A)" #: src/dir.c:66 msgid "&Change time" msgstr "바꾼 시간(&C)" #: src/dir.c:67 msgid "&Size" msgstr "크기(&S)" #: src/dir.c:68 msgid "&Inode" msgstr "Inode(&I)" #. New sort orders #: src/dir.c:71 msgid "&Type" msgstr "&Type" #: src/dir.c:72 msgid "&Links" msgstr "&Links" #: src/dir.c:73 msgid "N&GID" msgstr "N&GID" #: src/dir.c:74 msgid "N&UID" msgstr "N&UID" #: src/dir.c:75 msgid "&Owner" msgstr "소유자(&O)" #: src/dir.c:76 msgid "&Group" msgstr "집단(&G)" #: src/dir.c:386 #, c-format msgid "File '%s' exists but can not be stat-ed: %s" msgstr "파일 '%s'가 있지만 정보를 얻을 수 없음: %s" #: src/dir.c:657 msgid "Unknown" msgstr "모름" #: src/ext.c:143 src/user.c:499 #, c-format msgid "" " Can't generate unique filename \n" " %s " msgstr "" " 유일한 파일이름을 만들 수 없습니다 \n" " %s " #: src/ext.c:150 src/user.c:511 #, c-format msgid "" " Can't create temporary command file \n" " %s " msgstr "" " 임시 명령 파일을 생성할 수 없습니다 \n" " %s " #: src/ext.c:165 src/user.c:533 msgid " Parameter " msgstr " Parameter " #: src/ext.c:315 msgid " Can't execute commands on a Virtual File System directory " msgstr " 가상 파일 체계 디렉토리에서는 명령을 실행할 수 없어요 " #: src/ext.c:412 msgid " file error" msgstr " 파일 에러" #: src/ext.c:413 msgid "Format of the " msgstr "Format of the " #: src/ext.c:431 msgid " file error " msgstr " 파일 에러 " #: src/ext.c:432 msgid "Format of the ~/" msgstr "Format of the ~/" #: src/ext.c:432 msgid "" " file has changed\n" "with version 3.0. You may want either to\n" "copy it from " msgstr "" " file has changed\n" "with version 3.0. You may want either to\n" "copy it from " #: src/ext.c:434 msgid "" "mc.ext or use that\n" "file as an example of how to write it.\n" msgstr "" "mc.ext를 그대로 사용하거나\n" "이 파일을 수정해서 사용하십시오.\n" #: src/ext.c:436 msgid "mc.ext will be used for this moment." msgstr "지금은 mc.ext를 사용하실 수 있습니다." #: src/features.inc:8 msgid "Edition: " msgstr "호화판: " #: src/features.inc:11 msgid "XView" msgstr "XView" #: src/features.inc:13 msgid "Tk" msgstr "Tk" #: src/features.inc:16 msgid "text mode" msgstr "텍스트 모드" #: src/features.inc:18 msgid " with X11 support to read modifiers" msgstr "" #: src/features.inc:24 msgid "Virtual File System: tarfs, extfs" msgstr "가상 파일 시스템: tarfs, extfs" #: src/features.inc:26 msgid ", ftpfs" msgstr ", ftpfs" #: src/features.inc:28 msgid " (proxies: hsc proxy)" msgstr " (proxies: hsc proxy)" #: src/features.inc:30 msgid ", mcfs" msgstr ", mcfs" #: src/features.inc:32 msgid " (with termnet support)" msgstr " (with termnet support)" #: src/features.inc:35 msgid ", smbfs" msgstr ", smbfs" #: src/features.inc:39 msgid ", undelfs" msgstr ", undelfs" #: src/features.inc:45 msgid "With builtin Editor\n" msgstr "With builtin Editor\n" #: src/features.inc:48 msgid "Using " msgstr "Using " #: src/features.inc:51 msgid "system-installed " msgstr "system-installed " #: src/features.inc:53 msgid "S-lang library with " msgstr "S-lang library with " #: src/features.inc:56 msgid "terminfo" msgstr "terminfo" #: src/features.inc:59 msgid "termcap" msgstr "termcap" #: src/features.inc:61 msgid "an unknown terminal" msgstr "an unknown terminal" #: src/features.inc:64 msgid " database" msgstr " database" #: src/features.inc:67 msgid "the ncurses library" msgstr "the ncurses library" #: src/features.inc:69 msgid "some unknown curses library" msgstr "some unknown curses library" #: src/features.inc:74 msgid "With subshell support: " msgstr "With subshell support: " #: src/features.inc:76 msgid "optional" msgstr "optional" #: src/features.inc:78 msgid "as default" msgstr "as default" #: src/features.inc:84 msgid "With support for background operations\n" msgstr "With support for background operations\n" #: src/file.c:154 src/tree.c:639 msgid " Copy " msgstr " 복사 " #: src/file.c:155 src/tree.c:677 msgid " Move " msgstr " 이동 " #: src/file.c:156 src/tree.c:745 msgid " Delete " msgstr " 지우기 " #: src/file.c:244 msgid " Invalid target mask " msgstr " Invalid target mask " #: src/file.c:342 msgid " Could not make the hardlink " msgstr " 하드링크를 만들 수 없습니다 " #: src/file.c:384 #, c-format msgid "" " Cannot read source link \"%s\" \n" " %s " msgstr "" " 원천 링크 \"%s\"를 읽을 수 없어요 \n" " %s " #: src/file.c:394 msgid "" " Cannot make stable symlinks across non-local filesystems: \n" "\n" " Option Stable Symlinks will be disabled " msgstr "" " 원격 파일체계으로는 심볼릭링크를 생성할 수 없습니다: \n" "\n" " Stable 심볼릭링크 선택항목은 사용않됩니다 " #: src/file.c:442 #, c-format msgid "" " Cannot create target symlink \"%s\" \n" " %s " msgstr "" " 심볼릭링크 \"%s\"를 생성할 수 없습니다 \n" " %s " #: src/file.c:509 #, c-format msgid "" " Cannot overwrite directory \"%s\" \n" " %s " msgstr "" " \"%s\" 디렉토리를 덮어쓸 수 없습니다 \n" " %s " #: src/file.c:518 #, c-format msgid "" " Cannot stat source file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일 정보를 얻을 수 없습니다 \n" " %s " #: src/file.c:531 #, c-format msgid " `%s' and `%s' are the same file. " msgstr " `%s'와 `%s'가 같은 파일입니다. " #: src/file.c:574 #, c-format msgid "" " Cannot create special file \"%s\" \n" " %s " msgstr "" " 특수(special) 파일 \"%s\"을 생성할 수 없습니다 \n" " %s " #: src/file.c:583 src/file.c:812 #, c-format msgid "" " Cannot chown target file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일의 소유자를 바꿀 수 없습니다 \n" " %s " #: src/file.c:592 src/file.c:831 #, c-format msgid "" " Cannot chmod target file \"%s\" \n" " %s " msgstr "" " 대상파일 \"%s\"의 모드를 바꿀 수 없습니다 \n" " %s " #: src/file.c:609 #, c-format msgid "" " Cannot open source file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일을 열 수 없습니다 \n" " %s " #: src/file.c:619 msgid " Reget failed, about to overwrite file " msgstr " 이어받기 실패, 파일을 덮어쓸 예정임 " #: src/file.c:625 #, c-format msgid "" " Cannot fstat source file \"%s\" \n" " %s " msgstr "" " 소스파일 \"%s\"의 파일정보를 얻을 수 없습니다 \n" " %s " #: src/file.c:651 #, c-format msgid "" " Cannot create target file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일을 생성할 수 없습니다 \n" " %s " #: src/file.c:665 #, c-format msgid "" " Cannot fstat target file \"%s\" \n" " %s " msgstr "" " 대상파일 \"%s\"의 파일정보를 얻을 수 없습니다 \n" " %s " #: src/file.c:696 #, c-format msgid "" " Cannot read source file \"%s\" \n" " %s " msgstr "" " 바탕파일 \"%s\"을 읽을 수 없습니다 \n" " %s " #: src/file.c:726 #, c-format msgid "" " Cannot write target file \"%s\" \n" " %s " msgstr "" " 대상파일 \"%s\"에 쓸 수 없습니다 \n" " %s " #: src/file.c:745 msgid "(stalled)" msgstr "(stalled)" #: src/file.c:783 #, c-format msgid "" " Cannot close source file \"%s\" \n" " %s " msgstr "" " 바탕파일 \"%s\"을 닫을 수 없습니다 \n" " %s " #: src/file.c:792 #, c-format msgid "" " Cannot close target file \"%s\" \n" " %s " msgstr "" " 대상파일 \"%s\"를 닫을 수 없습니다 \n" " %s " #: src/file.c:802 msgid "Incomplete file was retrieved. Keep it?" msgstr "완전하지 않은 파일이 받아졌습니다. 보존할까요?" #: src/file.c:803 msgid "&Delete" msgstr "지우기(&D)" #: src/file.c:803 src/hotlist.c:1443 msgid "&Keep" msgstr "보존(&K)" #: src/file.c:876 #, c-format msgid "" " Cannot stat source directory \"%s\" \n" " %s " msgstr "" " 원본 디렉토리 \"%s\"의 정보를 얻을 수 없습니다 \n" " %s " #: src/file.c:899 #, c-format msgid "" " Source directory \"%s\" is not a directory \n" " %s " msgstr "" " 원본 디렉토리 \"%s\"는 디렉토리이 아닙니다 \n" " %s " #. we found a cyclic symbolic link #: src/file.c:907 #, c-format msgid "" " Cannot copy cyclic symbolic link \n" " `%s' " msgstr "" " Cyclic 심볼릭링크는 복사할 수 없습니다 \n" " `%s' " #: src/file.c:964 #, c-format msgid "" " Cannot create target directory \"%s\" \n" " %s " msgstr "" " 대상 디렉토리 \"%s\"를 생성할 수 없습니다 \n" " %s " #: src/file.c:987 #, c-format msgid "" " Cannot chown target directory \"%s\" \n" " %s " msgstr "" " 대상 디렉토리 \"%s\"의 소유자를 바꿀 수 없습니다 \n" " %s " #. Source doesn't exist #: src/file.c:1100 #, c-format msgid "" " Cannot stat file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일의 정보를 얻을 수 없습니다 \n" " %s " #: src/file.c:1122 #, c-format msgid " `%s' and `%s' are the same file " msgstr " `%s'와 `%s'는 같은 파일입니다 " #: src/file.c:1129 #, c-format msgid " Cannot overwrite directory `%s' " msgstr " `%s' 디렉토리을 덮어쓸 수 없습니다 " #: src/file.c:1172 #, c-format msgid "" " Cannot move file \"%s\" to \"%s\" \n" " %s " msgstr "" " \"%s\" 파일을 \"%s\"로 이동할 수 없습니다 \n" " %s " #: src/file.c:1192 #, c-format msgid "" " Cannot remove file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일을 지울 수 없습니다 \n" " %s " #: src/file.c:1246 #, c-format msgid " `%s' and `%s' are the same directory " msgstr " `%s'와 `%s'는 같은 디렉토리입니다 " #: src/file.c:1265 #, c-format msgid " Cannot overwrite directory \"%s\" %s " msgstr " \"%s\" 디렉토리을 덮어쓸 수 없습니다. %s " #: src/file.c:1267 #, c-format msgid " Cannot overwrite file \"%s\" %s " msgstr " \"%s\" 파일을 겹쳐쓸 수 없습니다. %s " #: src/file.c:1294 #, c-format msgid "" " Cannot move directory \"%s\" to \"%s\" \n" " %s " msgstr "" " \"%s\" 디렉토리을 \"%s\"로 이동할 수 없습니다 \n" " %s " #: src/file.c:1357 #, c-format msgid "" " Cannot delete file \"%s\" \n" " %s " msgstr "" " \"%s\" 파일을 지울 수 없습니다 \n" " %s " #: src/file.c:1418 src/file.c:1488 src/file.c:1520 #, c-format msgid "" " Cannot remove directory \"%s\" \n" " %s " msgstr "" " \"%s\" 디렉토리을 지울 수 없습니다 \n" " %s " #: src/file.c:1559 msgid " Internal error: get_file \n" msgstr " 내부 오류: get_file \n" #. #. * This array introduced to avoid translation problems. The former (op_names) #. * is assumed to be nouns, suitable in dialog box titles; this one should #. * contain whatever is used in prompt itself (i.e. in russian, it's verb). #. * Notice first symbol - it is to fool gettext and force these strings to #. * be different for it. First symbol is skipped while building a prompt. #. * (I don't use spaces around the words, because someday they could be #. * dropped, when widgets get smarter) #. #: src/file.c:1680 msgid "1Copy" msgstr "1Copy" #: src/file.c:1680 msgid "1Move" msgstr "1Move" #: src/file.c:1680 msgid "1Delete" msgstr "1Delete" #: src/file.c:1695 #, c-format msgid "%o %f \"%s\"%m" msgstr "%o %f \"%s\"%m" #: src/file.c:1696 #, c-format msgid "%o %d %f%m" msgstr "%o %d %f%m" #: src/file.c:1698 #, c-format msgid "%o %f \"%s\"%e" msgstr "%o %f \"%s\"%e" #: src/file.c:1699 #, c-format msgid "%o %d %f%e" msgstr "%o %d %f%e" #: src/file.c:1703 vfs/fish.c:509 msgid "file" msgstr "file" #: src/file.c:1703 msgid "files" msgstr "files" #: src/file.c:1703 msgid "directory" msgstr "directory" #: src/file.c:1703 msgid "directories" msgstr "directories" #: src/file.c:1704 msgid "files/directories" msgstr "files/directories" #: src/file.c:1704 msgid " with source mask:" msgstr " with source mask:" #: src/file.c:1856 msgid " Can't operate on \"..\"! " msgstr " \"..\"에 대해서는 작업할 수 없습니다! " #: src/file.c:1875 src/screen.c:2118 msgid "Yes" msgstr "예" #: src/file.c:1875 src/screen.c:2118 msgid "No" msgstr "아니오" #: src/file.c:1928 msgid " Sorry, I could not put the job in background " msgstr " 미안, 백그라운드로 일을 수행할 수 없네요 " #: src/file.c:2014 src/file.c:2098 msgid " Internal failure " msgstr " 내부 오류 " #: src/file.c:2014 src/file.c:2098 msgid " Unknown file operation " msgstr " 알려지지 않은 파일 조작 " #: src/file.c:2029 #, c-format msgid "" " Destination \"%s\" must be a directory \n" " %s " msgstr "" " 대상 \"%s\"는 디렉토리이어야 합니다 \n" " %s " #: src/file.c:2190 msgid "&Retry" msgstr "재시도(&R)" #: src/file.c:2190 src/file.c:2251 src/filegui.c:264 src/filegui.c:592 msgid "&Abort" msgstr "중단(&A)" #: src/file.c:2242 msgid "" "\n" " Directory not empty. \n" " Delete it recursively? " msgstr "" "\n" " 빈 디렉토리이 아닌데요. \n" " 그래도 지울까요? " #: src/file.c:2243 msgid "" "\n" " Background process: Directory not empty \n" " Delete it recursively? " msgstr "" "\n" " 백그라운드 프로세스: 디렉토리이 비지 않았음 \n" " 그래도 지울까요? " #: src/file.c:2250 msgid "a&ll" msgstr "모두(&l)" #: src/file.c:2250 src/filegui.c:595 msgid "non&E" msgstr "non&E" #: src/file.c:2260 msgid " Type 'yes' if you REALLY want to delete " msgstr " 정말로 지우기를 원하시면 'yes'를 입력하십시오 " #: src/file.c:2262 msgid "all the directories " msgstr "모든 디렉토리 " #: src/file.c:2264 msgid " Recursive Delete " msgstr " Recursive 지우기 " #: src/file.c:2265 msgid " Background process: Recursive Delete " msgstr " 백그라운드 프로세스: Recursive 지우기 " #: src/filegui.c:424 msgid "File" msgstr "파일" #: src/filegui.c:447 msgid "Count" msgstr "갯수" #: src/filegui.c:468 msgid "Bytes" msgstr "바이트" #: src/filegui.c:505 msgid "Source" msgstr "원본" #: src/filegui.c:528 msgid "Target" msgstr "대상" #: src/filegui.c:550 msgid "Deleting" msgstr "지우기" #: src/filegui.c:590 #, c-format msgid "Target file \"%s\" already exists!" msgstr "대상 파일 \"%s\"이 이미 있는데요!" #: src/filegui.c:593 msgid "if &Size differs" msgstr "크기(&S)가 틀리면" #: src/filegui.c:596 msgid "&Update" msgstr "갱신(&U)" #: src/filegui.c:598 msgid "Overwrite all targets?" msgstr "모두 덮어쓸까요?" #: src/filegui.c:600 msgid "&Reget" msgstr "&Reget" #: src/filegui.c:601 msgid "ap&Pend" msgstr "ap&Pend" #: src/filegui.c:604 msgid "Overwrite this target?" msgstr "이 파일을 덮어쓸까요?" #: src/filegui.c:606 #, c-format msgid "Target date: %s, size %d" msgstr "대상 날짜: %s, 크기 %d" #: src/filegui.c:608 #, c-format msgid "Source date: %s, size %d" msgstr "원본 날짜: %s, 크기 %d" #: src/filegui.c:692 msgid " File exists " msgstr " 파일 있음 " #: src/filegui.c:693 msgid " Background process: File exists " msgstr " 백그라운드 프로세스: 파일 있음 " #. follow symlinks and preserve Attributes must be the first #: src/filegui.c:805 msgid "preserve &Attributes" msgstr "파일 속성 보존(&A)" #. &op_preserve #: src/filegui.c:807 msgid "follow &Links" msgstr "링크 따르기(&L)" #. &file_mask_op_follow_links #: src/filegui.c:809 msgid "to:" msgstr "대상:" #: src/filegui.c:810 msgid "&Using shell patterns" msgstr "명령해석기 패턴 사용(&U)" #: src/filegui.c:831 msgid "&Background" msgstr "&Background" #: src/filegui.c:840 msgid "&Stable Symlinks" msgstr "&Stable 심볼릭링크" #. &file_mask_stable_symlinks #: src/filegui.c:842 msgid "&Dive into subdir if exists" msgstr "같은 디렉토리 존재시 그 밑으로(&D)" #: src/filegui.c:1001 #, c-format msgid "" "Invalid source pattern `%s' \n" " %s " msgstr "" "원본 패턴 `%s'가 잘못되었습니다 \n" " %s " #: src/find.c:130 msgid "&Suspend" msgstr "일시중지(&S)" #: src/find.c:131 msgid "Con&tinue" msgstr "계속(&t)" #: src/find.c:132 msgid "&Chdir" msgstr "&Chdir" #: src/find.c:133 msgid "&Again" msgstr "다시(&A)" #: src/find.c:134 msgid "&Quit" msgstr "종료(&Q)" #: src/find.c:135 src/panelize.c:89 msgid "Pane&lize" msgstr "패널화(&l)" #: src/find.c:136 msgid "&View - F3" msgstr "보기(&V) - F3" #: src/find.c:137 msgid "&Edit - F4" msgstr "편집(&E) - F4" #: src/find.c:170 msgid "Start at:" msgstr "시작위치:" #: src/find.c:170 msgid "Filename:" msgstr "파일명:" #: src/find.c:170 msgid "Content: " msgstr "내용: " #: src/find.c:171 src/main.c:1245 src/main.c:1269 msgid "&Tree" msgstr "나무꼴(&T)" #: src/find.c:223 msgid "Find File" msgstr "파일 찾기" #: src/find.c:452 #, c-format msgid "Grepping in %s" msgstr "%s에서 문자열 찾는 중" #: src/find.c:490 msgid " Find/read " msgstr " 찾기/읽기 " #: src/find.c:490 msgid " Problem reading from child " msgstr " 자식(child)로 부터 읽을 수 없음 " #: src/find.c:537 msgid "Finished" msgstr "끝났어요" #: src/find.c:561 src/view.c:1528 #, c-format msgid "Searching %s" msgstr "%s 찾는 중" #: src/find.c:717 src/find.c:757 msgid "Suspend" msgstr "일시중지" #: src/find.c:717 msgid "Restart" msgstr "재시도" #: src/find.c:719 src/find.c:821 src/find.c:960 src/find.c:1056 msgid "Searching" msgstr "찾는 중" #: src/find.c:750 src/find.c:1031 msgid "Find file" msgstr "파일 찾기" #. The buttons #: src/find.c:755 msgid "Change to this directory" msgstr "이 디렉토리으로 가기" #: src/find.c:756 msgid "Search again" msgstr "다시 찾기" #: src/find.c:761 msgid "View this file" msgstr "이 파일 보기" #: src/find.c:762 msgid "Edit this file" msgstr "이 파일 편집" #: src/find.c:763 msgid "Send the results to a Panel" msgstr "그 결과를 패널에 표시" #: src/fixhlp.c:171 msgid "Usage: fixhlp \n" msgstr "Usage: fixhlp \n" #: src/fixhlp.c:176 msgid "fixhlp: Cannot open toc for writing" msgstr "fixhlp: toc 열기 에러" #: src/fixhlp.c:179 msgid "" "[Contents]\n" " Topics:\n" "\n" msgstr "" "[Contents]\n" " Topics:\n" "\n" #: src/help.c:279 msgid "" " Help file format error\n" "" msgstr "" " 도움말 파일 형식 에러\n" "" #: src/help.c:318 msgid " Internal bug: Double start of link area " msgstr " 내부 버그: Double start of link area " #: src/help.c:572 msgid " Can't find node [Contents] in help file " msgstr " 도움말 파일에서 [Contents]를 찾을 수 없어요 " #: src/help.c:741 msgid " Help " msgstr " 도움말 " #: src/help.c:766 src/user.c:637 #, c-format msgid "" " Can't open file %s \n" " %s " msgstr "" " %s 파일을 열 수 없어요 \n" " %s " #: src/help.c:771 #, c-format msgid " Can't find node %s in help file " msgstr " 도움말 파일에서 %s를 찾을 수 없어요 " #: src/help.c:808 msgid "Index" msgstr "색인" #: src/help.c:810 msgid "Prev" msgstr "이전" #: src/hotlist.c:132 msgid "&Move" msgstr "이동(&M)" #: src/hotlist.c:133 src/hotlist.c:1443 src/panelize.c:88 src/wtools.c:383 msgid "&Remove" msgstr "지우기(&R)" #: src/hotlist.c:134 src/hotlist.c:818 src/hotlist.c:915 msgid "&Append" msgstr "추가(&A)" #: src/hotlist.c:135 src/hotlist.c:816 src/hotlist.c:913 msgid "&Insert" msgstr "삽입(&I)" #: src/hotlist.c:136 msgid "New &Entry" msgstr "새 엔트리(&E)" #: src/hotlist.c:137 msgid "New &Group" msgstr "새 집단(&G)" #: src/hotlist.c:139 msgid "&Up" msgstr "위로(&U)" #: src/hotlist.c:140 msgid "&Add current" msgstr "현 패널 추가(&A)" #: src/hotlist.c:141 msgid "Change &To" msgstr "..로 바꾸기(&T)" #: src/hotlist.c:201 msgid "Subgroup - press ENTER to see list" msgstr "하위집단 - 보려면 ENTER를 누르십시오" #: src/hotlist.c:620 msgid "Active VFS directories" msgstr "활성 VFS 디렉토리" #: src/hotlist.c:620 msgid "Directory hotlist" msgstr "디렉토리 단축목록" #: src/hotlist.c:639 msgid " Directory path " msgstr " 디렉토리 경로 " #. This one holds the displayed pathname #: src/hotlist.c:642 src/hotlist.c:689 msgid " Directory label " msgstr " 디렉토리 꼬리표 " #: src/hotlist.c:663 msgid "Moving " msgstr "이동 " #: src/hotlist.c:892 msgid "New hotlist entry" msgstr "새 단축목록 엔트리" #: src/hotlist.c:892 msgid "Directory label" msgstr "디렉토리 꼬리표" #: src/hotlist.c:892 msgid "Directory path" msgstr "디렉토리 경로" #: src/hotlist.c:973 msgid " New hotlist group " msgstr " 새 단축목록 집단 " #: src/hotlist.c:973 msgid "Name of new group" msgstr "새 집단의 이름" #: src/hotlist.c:988 #, c-format msgid "Label for \"%s\":" msgstr "\"%s\"의 꼬리표:" #: src/hotlist.c:992 msgid " Add to hotlist " msgstr " 단축목록에 추가 " #: src/hotlist.c:1029 msgid " Remove: " msgstr " 지우기: " #: src/hotlist.c:1033 msgid "" "\n" " Group not empty.\n" " Remove it?" msgstr "" "\n" " 비어있지 않은 집단입니다.\n" " 지울까요?" #: src/hotlist.c:1378 msgid " Top level group " msgstr " 최상위 집단 " #: src/hotlist.c:1394 msgid "Hotlist is now kept in file ~/" msgstr "Hotlist is now kept in file ~/" #: src/hotlist.c:1396 msgid "MC will load hotlist from ~/" msgstr "MC will load hotlist from ~/" #: src/hotlist.c:1398 msgid "and then delete [Hotlist] section there" msgstr "and then delete [Hotlist] section there" #: src/hotlist.c:1400 src/hotlist.c:1419 src/hotlist.c:1442 src/hotlist.c:1467 msgid " Hotlist Load " msgstr " 단축목록 불러오기 " #: src/hotlist.c:1416 src/hotlist.c:1464 msgid "MC was unable to write ~/" msgstr "MC was unable to write ~/" #: src/hotlist.c:1417 msgid " file, your old hotlist entries were not deleted" msgstr " file, your old hotlist entries were not deleted" #: src/hotlist.c:1431 msgid "You have ~/" msgstr "You have ~/" #: src/hotlist.c:1431 msgid " file and [Hotlist] section in ~/" msgstr " file and [Hotlist] section in ~/" #: src/hotlist.c:1432 msgid "Your ~/" msgstr "Your ~/" #: src/hotlist.c:1432 msgid " most probably was created\n" msgstr " most probably was created\n" #: src/hotlist.c:1433 msgid "" "by an earlier development version of MC\n" "and is more actual than ~/" msgstr "" "by an earlier development version of MC\n" "and is more actual than ~/" #: src/hotlist.c:1434 msgid "" " entries\n" "\n" msgstr "" " entries\n" "\n" #: src/hotlist.c:1435 msgid "" "You can choose between\n" "\n" " Remove - remove old hotlist entries from ~/" msgstr "" "다음 중에서 선택하실 수 있습니다\n" "\n" " 삭제 - 이전 hotlist를 삭제: ~/" #: src/hotlist.c:1437 msgid "" " Keep - keep your old entries; you will be asked\n" " the same question next time\n" " Merge - add old entries to hotlist as group \"Entries from ~/" msgstr "" " 보존 - 이전 목록을 보존. 다음 번에도 똑같은 질문을 받게 될 " "것입니다\n" " 합치기 - 이전 목록을 추가. 그룹이름은 \"Entries from ~/" #: src/hotlist.c:1443 msgid "&Merge" msgstr "합치기(&M)" #: src/hotlist.c:1455 msgid " Entries from ~/" msgstr " Entries from ~/" #: src/hotlist.c:1465 msgid " file your old hotlist entries were not deleted" msgstr " file your old hotlist entries were not deleted" #: src/info.c:83 #, c-format msgid "Midnight Commander %s" msgstr "Midnight Commander %s" #: src/info.c:109 #, c-format msgid "File: %s" msgstr "파일: %s" #: src/info.c:122 msgid "Free nodes %d (%d%%) of %d" msgstr "빈 노드: %d (%d%%) of %d" #: src/info.c:128 msgid "No node information" msgstr "노드 정보 없음" #: src/info.c:133 msgid "Free space " msgstr "빈 공간:" #: src/info.c:135 msgid " (%d%%) of " msgstr " (%d%%) of " #: src/info.c:139 msgid "No space information" msgstr "빈 공간: 정보 없음" #: src/info.c:143 #, c-format msgid "Type: %s " msgstr "종류: %s " #: src/info.c:143 msgid "non-local vfs" msgstr "원격 vfs" #: src/info.c:149 #, c-format msgid "Device: %s" msgstr "디바이스: %s" #: src/info.c:153 #, c-format msgid "Filesystem: %s" msgstr "파일체계: %s" #: src/info.c:158 #, c-format msgid "Accessed: %s" msgstr "액세스일: %s" #: src/info.c:162 #, c-format msgid "Modified: %s" msgstr "수정일: %s" #: src/info.c:166 #, c-format msgid "Created: %s" msgstr "생성일: %s" #: src/info.c:179 msgid "Size: " msgstr "크기: " #: src/info.c:182 #, c-format msgid " (%d blocks)" msgstr " (%d 구역)" #: src/info.c:188 #, c-format msgid "Owner: %s/%s" msgstr "소유자: %s/%s" #: src/info.c:193 #, c-format msgid "Links: %d" msgstr "링크: %d" #: src/info.c:197 #, c-format msgid "Mode: %s (%04o)" msgstr "모드: %s (%04o)" #: src/info.c:202 #, c-format msgid "Location: %Xh:%Xh" msgstr "위치: %Xh:%Xh" #: src/info.c:212 msgid "File: None" msgstr "파일: 아님" #: src/layout.c:159 msgid "&Vertical" msgstr "수직(&V)" #: src/layout.c:160 msgid "&Horizontal" msgstr "수평(&H)" #: src/layout.c:170 msgid "&Xterm hintbar" msgstr "X 터미널 힌트바(&X)" #: src/layout.c:171 msgid "h&Intbar visible" msgstr "힌트바 보이기(&I)" #: src/layout.c:172 msgid "&Keybar visible" msgstr "글쇠바 보이기(&K)" #: src/layout.c:173 msgid "command &Prompt" msgstr "명령 프롬프트&P)" #: src/layout.c:174 msgid "show &Mini status" msgstr "미니 상태바 보이기(&M)" #: src/layout.c:175 msgid "menu&Bar visible" msgstr "메뉴바 보이기(&B)" #: src/layout.c:176 msgid "&Equal split" msgstr "같은 너비로(&E)" #: src/layout.c:177 msgid "pe&Rmissions" msgstr "허용(&R)" #: src/layout.c:178 msgid "&File types" msgstr "파일 종류(&F)" #: src/layout.c:372 src/learn.c:60 src/learn.c:179 src/option.c:145 msgid "&Save" msgstr "저장(&S)" #. length of line with '<' '>' buttons #: src/layout.c:380 msgid " Layout " msgstr " 배치 " #: src/layout.c:381 msgid " Panel split " msgstr " 패널 분리 " #: src/layout.c:382 msgid " Highlight... " msgstr " 하이라이트... " #: src/layout.c:383 src/option.c:156 msgid " Other options " msgstr " 기타 선택항목 " #: src/layout.c:384 msgid "output lines" msgstr "output lines" #: src/layout.c:451 msgid "Layout" msgstr "배치" #: src/learn.c:74 msgid " Learn keys " msgstr " 글쇠 배우기 " #: src/learn.c:93 msgid " Teach me a key " msgstr " 글쇠를 가르켜주십시오 " #: src/learn.c:94 #, c-format msgid "" "Please press the %s\n" "and then wait until this message disappears.\n" "\n" "Then, press it again to see if OK appears\n" "next to its button.\n" "\n" "If you want to escape, press a single Escape key\n" "and wait as well." msgstr "" "%s를 누르십시오\n" "그리고 이 메시지가 사라지기를 기다리십시오.\n" "\n" "그리고, 해당 버튼에 OK가 나타나도록 한번 더\n" "그 글쇠를 누르십시오\n" "\n" "만약 빠져나가길 원하시면 Escape글쇠를 한번만 누른 후\n" "마찬가지로 기다리십시오." #: src/learn.c:122 msgid " Cannot accept this key " msgstr " 받아들일 수 없는 글쇠 " #: src/learn.c:123 #, c-format msgid " You have entered \"%s\"" msgstr " 당신은 \"%s\"를 누르셨습니다" #: src/learn.c:170 msgid "OK" msgstr "OK" #: src/learn.c:177 msgid "" "It seems that all your keys already\n" "work fine. That's great." msgstr "" "당신의 글쇠들이 이미 잘 동작하는 것처럼\n" "보이는 군요. 아주 좋습니다." #: src/learn.c:179 msgid "&Discard" msgstr "버림(&D)" #: src/learn.c:183 msgid "" "Great! You have a complete terminal database!\n" "All your keys work well." msgstr "" "훌륭해요! 당신은 단말창 데이터베이스를 완성했어요!\n" "이제 모든 글쇠가 제대로 동작합니다." #: src/learn.c:267 msgid "Learn keys" msgstr "글쇠 배우기" #: src/learn.c:300 msgid "Press all the keys mentioned here. After you have done it, check" msgstr "여기 언급된 모든 글쇠를 누르십시오. 당신이 다 끝낸 후에는 OK가 찍히" #: src/learn.c:302 msgid "which keys are not marked with OK. Press space on the missing" msgstr "지 않은 글쇠가 있는 지 확인하십시오. 그 위에서 SPACE 글쇠를 누르거" #: src/learn.c:304 msgid "key, or click with the mouse to define it. Move around with Tab." msgstr "나 마우스로 클릭한 후 글쇠를 정의하십시오. 탭글쇠로 이동하십시오" #: src/main.c:709 msgid "" " The Commander can't change to the directory that \n" " the subshell claims you are in. Perhaps you have \n" " deleted your working directory, or given yourself \n" " extra access permissions with the \"su\" command? " msgstr "" " 커맨더가 당신이 현재 수행중인 subshell에 의해 \n" " 그 디렉토리으로 바꿀 수 없습니다. 아마도 당신이 \n" " 작업 디렉토리을 지웠거나, 아니면 \"su\" 명령을\n" " 사용하여 특별한 액세스 권한을 가진 것 아녜요? " #: src/main.c:784 msgid "Press any key to continue..." msgstr "계속하려면 아무 글쇠나 누르십시오..." #: src/main.c:834 msgid " The shell is already running a command " msgstr " 명령해석기가 이미 명령을 수행중입니다 " #: src/main.c:861 src/screen.c:2116 src/screen.c:2163 msgid " The Midnight Commander " msgstr " The Midnight Commander " #: src/main.c:862 msgid " Do you really want to quit the Midnight Commander? " msgstr " 정말로 Midnight Commander를 종료하시겠읍니까? " #: src/main.c:1242 src/main.c:1266 msgid "&Listing mode..." msgstr "파일목록보기 설정(&L)..." #: src/main.c:1243 src/main.c:1267 msgid "&Quick view C-x q" msgstr "빠르게 보기(&Q) C-x q" #: src/main.c:1244 src/main.c:1268 msgid "&Info C-x i" msgstr "정보(&I) C-x i" #: src/main.c:1247 src/main.c:1271 msgid "&Sort order..." msgstr "정렬 순서(&S)..." #: src/main.c:1249 src/main.c:1273 msgid "&Filter..." msgstr "필터(&F)..." #: src/main.c:1252 src/main.c:1276 msgid "&Network link..." msgstr "네트워크 연결(&N)..." #: src/main.c:1253 src/main.c:1277 msgid "FT&P link..." msgstr "FTP 연결(&P)..." #: src/main.c:1255 src/main.c:1279 msgid "SM&B link..." msgstr "SMB 연결(&B)..." #: src/main.c:1260 src/main.c:1284 msgid "&Drive... M-d" msgstr "드라이브(&D)... M-d" #: src/main.c:1262 src/main.c:1286 msgid "&Rescan C-r" msgstr "다시 읽기(&R) C-r" #: src/main.c:1290 msgid "&User menu F2" msgstr "사용자 메뉴(&U) F2" #: src/main.c:1291 msgid "&View F3" msgstr "보기(&V) F3" #: src/main.c:1292 msgid "Vie&w file... " msgstr "파일 보기(&w)... " #: src/main.c:1293 msgid "&Filtered view M-!" msgstr "필터로 보기(&F) M-!" #: src/main.c:1294 msgid "&Edit F4" msgstr "편집(&E) F4" #: src/main.c:1295 msgid "&Copy F5" msgstr "복사(&C) F5" #: src/main.c:1296 msgid "c&Hmod C-x c" msgstr "파일 모드 바꾸기(&H) C-x c" #: src/main.c:1298 msgid "&Link C-x l" msgstr "링크(&L) C-x l" #: src/main.c:1299 msgid "&SymLink C-x s" msgstr "심볼릭링크(&S) C-x s" #: src/main.c:1300 msgid "edit s&Ymlink C-x C-s" msgstr "심볼릭링크 수정(&Y) C-x C-s" #: src/main.c:1301 msgid "ch&Own C-x o" msgstr "소유자 바꾸기(&O) C-x o" #: src/main.c:1302 msgid "&Advanced chown " msgstr "고급 소유자 바꾸기(&A) " #: src/main.c:1304 msgid "&Rename/Move F6" msgstr "바꾸기/이동(&R) F6" #: src/main.c:1305 msgid "&Mkdir F7" msgstr "디렉토리 생성(&M) F7" #: src/main.c:1306 msgid "&Delete F8" msgstr "지우기(&D) F8" #: src/main.c:1307 msgid "&Quick cd M-c" msgstr "디렉토리 빨리 바꾸기(&Q) M-c" #: src/main.c:1309 msgid "select &Group M-+" msgstr "집단선택(&G) M-+" #: src/main.c:1310 msgid "u&Nselect group M-\\" msgstr "집단선택 해제(&N) M-\\" #: src/main.c:1311 msgid "reverse selec&Tion M-*" msgstr "선택반전(&T) M-*" #: src/main.c:1313 msgid "e&Xit F10" msgstr "종료(&X) F10" #: src/main.c:1323 msgid "&Directory tree" msgstr "디렉토리 나무꼴(&D)" #: src/main.c:1325 msgid "&Find file M-?" msgstr "파일 찾기(&F) M-?" #: src/main.c:1326 msgid "s&Wap panels C-u" msgstr "패널 바꾸기(&W) C-u" #: src/main.c:1327 msgid "switch &Panels on/off C-o" msgstr "패널 열기/닫기(&P) C-o" #: src/main.c:1328 msgid "&Compare directories C-x d" msgstr "디렉토리 비교(&C) C-x d" #: src/main.c:1329 msgid "e&Xternal panelize C-x !" msgstr "외부명령 패널화하기(&X) C-x !" #: src/main.c:1330 msgid "show directory s&Izes" msgstr "디렉토리 크기 보기(&I)" #: src/main.c:1332 msgid "command &History" msgstr "명령 히스토리(&H)" #: src/main.c:1333 msgid "di&Rectory hotlist C-\\" msgstr "디렉토리 단축목록(&R) C-\\" #: src/main.c:1335 msgid "&Active VFS list C-x a" msgstr "활성 VFS 목록(&A) C-x a" #: src/main.c:1336 msgid "Fr&ee VFSs now" msgstr "VFS를 지금 해제(_e)" #: src/main.c:1339 msgid "&Background jobs C-x j" msgstr "백그라운드 jobs(&B) C-x j" #: src/main.c:1343 msgid "&Undelete files (ext2fs only)" msgstr "파일 되살림 (est2fs만 가능)" #: src/main.c:1346 msgid "&Listing format edit" msgstr "파일 목록 형식 바꾸기(&L)" #: src/main.c:1348 msgid "&Extension file edit" msgstr "확장자 파일 수정(&E)" #: src/main.c:1349 msgid "&Menu file edit" msgstr "메뉴 파일 수정(&M)" #: src/main.c:1354 msgid "&Configuration..." msgstr "환경설정(&C)..." #: src/main.c:1356 msgid "c&Onfirmation..." msgstr "확인(&O)..." #: src/main.c:1357 msgid "&Display bits..." msgstr "출력 비트(&D)..." #: src/main.c:1359 msgid "learn &Keys..." msgstr "글쇠 배우기(&K)..." #: src/main.c:1362 msgid "&Virtual FS..." msgstr "가상 파일체계(&V)..." #: src/main.c:1365 msgid "&Save setup" msgstr "환경 저장(&S)" #: src/main.c:1381 src/main.c:1383 msgid " &Left " msgstr " 왼쪽(&L) " #: src/main.c:1383 msgid " &Above " msgstr " 위(&A) " #: src/main.c:1386 msgid " &File " msgstr " 파일(&F) " #: src/main.c:1387 msgid " &Command " msgstr " 명령(&C) " #: src/main.c:1388 msgid " &Options " msgstr " 선택항목(&O) " #: src/main.c:1390 src/main.c:1392 msgid " &Right " msgstr " 오른쪽(&R) " #: src/main.c:1392 msgid " &Below " msgstr " 아래(&B) " #: src/main.c:1447 msgid " Information " msgstr " 정보 " #: src/main.c:1448 msgid "" " Using the fast reload option may not reflect the exact \n" " directory contents. In this cases you'll need to do a \n" " manual reload of the directory. See the man page for \n" " the details. " msgstr "" " 빠른 다시불러오기 선택항목을 사용할 경우 디렉토리 내용이 \n" " 항상 똑같다고 볼 수 없게 됩니다. 이런 경우가 생기면 \n" " 당신은 수동으로 디렉토리을 다시 읽어야만 합니다. \n" " 자세한 내용을 알고 싶으시면 설명서를 보십시오. " #: src/main.c:1927 msgid "Thank you for using GNU Midnight Commander" msgstr "GNU Midnight Commander를 사용해주셔서 감사합니다" #: src/main.c:2284 #, c-format msgid "with mouse support on xterm%s.\n" msgstr "with mouse support on xterm%s.\n" #: src/main.c:2285 msgid " and the Linux console" msgstr " and the Linux console" #: src/main.c:2381 msgid "The TERM environment variable is unset!\n" msgstr "TERM 환경변수가 설정되어있지 않습니다!\n" #: src/main.c:2487 msgid "" "Usage is:\n" "\n" "mc [flags] [this_dir] [other_panel_dir]\n" "\n" msgstr "" "사용법:\n" "\n" "mc [옵션] [이 디렉토리] [다른 패널 디렉토리]\n" "\n" #: src/main.c:2490 msgid "-a, --stickchars Force use of +, -, | for line drawing.\n" msgstr "-a, --stickchars 선을 그릴 때 무조건 +, -, | 을 사용.\n" #: src/main.c:2492 msgid "-b, --nocolor Force black and white display.\n" msgstr "-b, --nocolor 흑백으로 표시.\n" #: src/main.c:2494 msgid "-B, --background [DEVEL-ONLY: Debug the background code]\n" msgstr "-B, --background [개발자만: 백그라운드 코드 디버그]\n" #: src/main.c:2496 msgid "" "-c, --color Force color mode.\n" "-C, --colors Specify colors (use --help-colors to get a list).\n" "-d, --nomouse Disable mouse support.\n" msgstr "" "-c, --color 무조건 컬러 사용.\n" "-C, --colors 컬러 명시 (목록을 얻으려면 --help-colors 사용).\n" "-d, --nomouse 마우스 사용않함.\n" #: src/main.c:2500 msgid "-e, --edit Startup the internal editor.\n" msgstr "-e, --edit 내장 편집기 시작.\n" #: src/main.c:2502 msgid "" "-f, --libdir Print configured paths.\n" "-h, --help Shows this help message.\n" "-k, --resetsoft Reset softkeys (HP terminals only) to their " "terminfo/termcap\n" " default.\n" msgstr "" #: src/main.c:2507 msgid "-l, --ftplog file Log ftpfs commands to the file.\n" msgstr "" #: src/main.c:2510 msgid "-M, --memory file [DEVEL-ONLY: Log MAD messages to the file.]\n" msgstr "" #: src/main.c:2512 msgid "" "-P, --printwd At exit, print the last working directory.\n" "-s, --slow Disables verbose operation (for slow terminals).\n" msgstr "" #: src/main.c:2515 msgid "-t, --termcap Activate support for the TERMCAP variable.\n" msgstr "" #: src/main.c:2518 msgid "" "-S, --createcmdile Create command file to set default directory upon exit.\n" msgstr "" #: src/main.c:2521 msgid "" "-u, --nosubshell Disable the concurrent subshell mode.\n" "-U, --subshell Force the concurrent subshell mode.\n" "-r, --forceexec Force subshell execution.\n" msgstr "" #: src/main.c:2525 msgid "" "-v, --view fname Start up into the viewer mode.\n" "-V, --version Report version and configuration options.\n" "-x, --xterm Force xterm mouse support and screen save/restore.\n" msgstr "" #: src/main.c:2529 msgid "-X, --dbgsubshell [DEVEL-ONLY: Debug the subshell].\n" msgstr "" #: src/main.c:2531 msgid "" "\n" "Please send any bug reports (including the output of `mc -V')\n" "to mc-bugs@nuclecu.unam.mx\n" msgstr "" #: src/main.c:2547 msgid "" "--colors KEYWORD={FORE},{BACK}\n" "\n" "{FORE} and {BACK} can be ommited, and the default will be used\n" "\n" "Keywords:\n" " Global: errors, reverse, gauge, input\n" " File display: normal, selected, marked, markselect\n" " Dialog boxes: dnormal, dfocus, dhotnormal, dhotfocus\n" " Menus: menu, menuhot, menusel, menuhotsel\n" " Help: helpnormal, helpitalic, helplink, helpslink\n" " File types: directory, execute, link, device, special, core\n" "\n" "Colors:\n" " black, gray, red, brightred, green, brightgreen, brown,\n" " yellow, blue, brightblue, magenta, brightmagenta, cyan,\n" " brightcyan, lightgray and white\n" "\n" msgstr "" #: src/main.c:2596 #, c-format msgid "Library directory for the Midnight Commander: %s\n" msgstr "Midnight Commander용 라이브러리 디렉토리: %s\n" #: src/main.c:2610 msgid "" "Option -m is obsolete. Please look at Display Bits... in the Option's menu\n" msgstr "" "-m 선택항목은 의미가 없습니다. 선택항목 메뉴의 '출력 비트'를 보십시오\n" #: src/main.c:2687 msgid "Use to debug the background code" msgstr "백그라운드 코드를 디버깅할 때 사용" #: src/main.c:2693 msgid "Request to run in color mode" msgstr "컬러 모드로 실행을 요구" #: src/main.c:2695 msgid "Specifies a color configuration" msgstr "컬러 환경을 명세" #: src/main.c:2700 msgid "Edits one file" msgstr "한 파일 편집" #: src/main.c:2704 msgid "Displays this help message" msgstr "이 도움말 보여주기" #: src/main.c:2707 msgid "Displays a help screen on how to change the color scheme" msgstr "컬러를 어떻게 바꿀 수 있는 지 도움말 화면 출력" #: src/main.c:2710 msgid "Log ftp dialog to specified file" msgstr "주어진 파일로 ftp 다이알로그 로깅" #: src/main.c:2717 msgid "Obsolete" msgstr "쓸모없음" #: src/main.c:2719 msgid "Requests to run in black and white" msgstr "흑백 모드로 실행을 요구" #: src/main.c:2721 msgid "Disable mouse support in text version" msgstr "텍스크 버젼에서 마우스 사용않함" #: src/main.c:2724 msgid "Disables subshell support" msgstr "subshell 지원 않함" #: src/main.c:2728 msgid "Prints working directory at program exit" msgstr "프로그램 종료시 작업 디렉토리 출력" #: src/main.c:2730 msgid "Resets soft keys on HP terminals" msgstr "HP 터미널에서 소프트 글쇠 리셋" #: src/main.c:2732 msgid "To run on slow terminals" msgstr "느린 터미널에서 실행 시" #: src/main.c:2735 msgid "Use stickchars to draw" msgstr "Use stickchars to draw" #: src/main.c:2739 msgid "Enables subshell support (default)" msgstr "subshell 지원함 (기본값)" #: src/main.c:2744 msgid "Tries to use termcap instead of terminfo" msgstr "terminfo 대신 termcap 사용 시도" #: src/main.c:2748 msgid "Displays the current version" msgstr "현재 버젼 출력" #: src/main.c:2750 msgid "Launches the file viewer on a file" msgstr "파일에 대해 파일 보기 실행" #: src/main.c:2752 msgid "Forces xterm features" msgstr "xterm 기능을 무조건 사용" #: src/main.c:2754 msgid "Geometry for the window" msgstr "창의 크기/위치" #: src/main.c:2754 msgid "GEOMETRY" msgstr "GEOMETRY" #: src/main.c:2755 msgid "No windows opened at startup" msgstr "시작할 때 창을 열지 않아요" #: src/main.c:2756 msgid "No desktop icons" msgstr "데스크탑 아이콘 사용않함" #: src/main.c:2757 msgid "Look more like traditional gmc" msgstr "전통적인 gmc처럼 보기" #: src/main.c:2759 msgid "Display the directory that holds the .links startup files and exit" msgstr ".links 시작파일을 가진 디렉토리 출력하고 종료" #: src/main.c:3071 msgid "" "Couldn't open tty line. You have to run mc without the -P flag.\n" "On some systems you may want to run # `which mc`\n" msgstr "" "tty 선을 열수 없네요. 당신은 -P 선택항목없이 MC를 실행해야 합니다.\n" "특정 체계에서는 # `which mc` 와 같이 실행할 수도 있습니다.\n" #: src/main.c:3149 msgid " Notice " msgstr " Notice " #: src/main.c:3150 msgid "" " The Midnight Commander configuration files \n" " are now stored in the ~/.mc directory, the \n" " files have been moved now\n" msgstr "" " The Midnight Commander 환경설정 파일은 이제 ~/mc \n" " 디렉토리에 저장됩니다. 모든 파일이 그쪽 \n" " 으로 옮겨졌습니다.\n" #: src/option.c:74 msgid "safe de&Lete" msgstr "안전한 지우기(&L)" #: src/option.c:75 msgid "cd follows lin&Ks" msgstr "cd 링크 따르기(&K)" #: src/option.c:76 msgid "advanced cho&Wn" msgstr "고급 소유자 바꾸기(&W)" #: src/option.c:77 msgid "l&Ynx-like motion" msgstr "Lynx같은 동작(&Y)" #: src/option.c:79 msgid "Animation" msgstr "에니메이션" #: src/option.c:81 msgid "rotatin&G dash" msgstr "회전하는 대쉬(&G)" #: src/option.c:83 msgid "co&Mplete: show all" msgstr "Complete: 모두 보기(&M)" #: src/option.c:84 msgid "&Use internal view" msgstr "내장 뷰어 사용(&U)" #: src/option.c:85 msgid "use internal ed&It" msgstr "내장 에디터 사용(&I)" #: src/option.c:86 msgid "auto m&Enus" msgstr "자동 사용자 메뉴(&E)" #: src/option.c:87 msgid "&Auto save setup" msgstr "환경 자동 저장(&A)" #: src/option.c:88 msgid "shell &Patterns" msgstr "명령해석기 패턴(&P)" #: src/option.c:89 msgid "Compute &Totals" msgstr "Compute &Totals" #: src/option.c:90 msgid "&Verbose operation" msgstr "동작할 때 말을 많이(&V)" #: src/option.c:91 msgid "&Fast dir reload" msgstr "디렉토리 빨리 다시읽기(&F)" #: src/option.c:92 msgid "mi&X all files" msgstr "모든 파일 섞기(&X)" #: src/option.c:93 msgid "&Drop down menus" msgstr "드롭다운 메뉴(&D)" #: src/option.c:94 msgid "ma&Rk moves down" msgstr "선택시 깜박이를 밑으로 옮김(&R)" #: src/option.c:95 msgid "show &Hidden files" msgstr "숨은 파일 보기(&H)" #: src/option.c:96 msgid "show &Backup files" msgstr "여벌 파일 보기(&B)" #: src/option.c:103 msgid "&Never" msgstr "결코(&N)" #: src/option.c:104 msgid "on dumb &Terminals" msgstr "dumb 터미널에서만" #: src/option.c:105 msgid "alwa&Ys" msgstr "항상(&Y)" #. Similar code is in layout.c (init_layout()) #: src/option.c:153 msgid " Configure options " msgstr " 환경설정 선택항목 " #: src/option.c:154 msgid " Panel options " msgstr " 패널 선택항목 " #: src/option.c:155 msgid " Pause after run... " msgstr " 실행 후 멈춤... " #: src/option.c:207 msgid "Configure options" msgstr "환경설정 선택항목" #: src/panelize.c:87 msgid "&Add new" msgstr "새명령 추가(&A)" #: src/panelize.c:99 msgid " External panelize " msgstr " 외부명령어 패널화 " #: src/panelize.c:194 src/panelize.c:458 msgid "External panelize" msgstr "외부명령어 패널화" #: src/panelize.c:219 src/panelize.c:276 src/panelize.c:347 src/panelize.c:368 msgid "Other command" msgstr "기타 명령어" #: src/panelize.c:260 msgid " Add to external panelize " msgstr " 외부명령 패널화에 추가 " #: src/panelize.c:261 msgid " Enter command label: " msgstr " 명령어 꼬리표 입력: " #: src/panelize.c:301 msgid " I can't run external panelize while logged on a non local directory " msgstr "" " 원격 디렉토리으로 로그한 경우에는 외부 패널화 명령을 실행할 수 없습니다 " #: src/panelize.c:351 msgid "Find *.orig after patching" msgstr "*.orig 파일이 있습니다" #: src/panelize.c:352 msgid "Find SUID and SGID programs" msgstr "SUID와 SGID 풀그림이 있어요" #: src/panelize.c:403 msgid "Cannot invoke command." msgstr "명령을 실행할 수 없어요." #: src/panelize.c:458 msgid "Pipe close failed" msgstr "파이프 닫기 실패" #: src/popthelp.c:31 msgid "Show this help message" msgstr "이 도움말 보여주기" #: src/popthelp.c:32 msgid "Display brief usage message" msgstr "간단한 사용 메시지 출력" #: src/screen.c:227 msgid "SUB-DIR" msgstr "" #: src/screen.c:227 msgid "UP--DIR" msgstr "" #: src/screen.c:417 msgid "MTime" msgstr "MTime" #: src/screen.c:418 msgid "ATime" msgstr "ATime" #: src/screen.c:419 msgid "CTime" msgstr "CTime" #: src/screen.c:421 msgid "Perm" msgstr "Perm" #: src/screen.c:422 msgid "Nl" msgstr "Nl" #: src/screen.c:423 msgid "Inode" msgstr "Inode" #: src/screen.c:424 msgid "UID" msgstr "UID" #: src/screen.c:425 msgid "GID" msgstr "GID" #: src/screen.c:661 #, c-format msgid " %s bytes in %d file%s" msgstr " %s bytes in %d file%s" #: src/screen.c:1325 msgid "Unknow tag on display format: " msgstr "Unknow tag on display format: " #: src/screen.c:1451 msgid "User suplied format looks invalid, reverting to default." msgstr "사용자가 제공한 형식은 잘못되었습니다. 기본값 사용." #: src/screen.c:2117 src/screen.c:2164 msgid " Do you really want to execute? " msgstr " 정말로 실행하시겠읍니까? " #: src/screen.c:2128 src/screen.c:2178 msgid " No action taken " msgstr " No action taken " #: src/screen.c:2399 src/screen.c:2429 src/tree.c:1016 msgid "RenMov" msgstr "RenMov" #: src/screen.c:2400 src/screen.c:2430 src/tree.c:1020 msgid "Mkdir" msgstr "Mkdir" #: src/screen.c:2416 src/tree.c:866 #, c-format msgid "" " Can't chdir to \"%s\" \n" " %s " msgstr "" " \"%s\"로 디렉토리을 바꿀 수 없어요 \n" " %s " #: src/subshell.c:287 #, c-format msgid "Couldn't open named pipe %s\n" msgstr "%s 파이프를 열 수 없어요\n" #: src/subshell.c:705 msgid " The shell is still active. Quit anyway? " msgstr " 명령해석기가 아직 활성상태입니다. 그래도 종료하실래요? " #: src/subshell.c:731 msgid " There are stopped jobs." msgstr " stopped jobs가 있습니다." #: src/subshell.c:732 msgid " Quit anyway? " msgstr " 그래도 종료하실래요? " #: src/subshell.c:785 #, c-format msgid "Warning: Couldn't change to %s.\n" msgstr "경고: %s로 바꿀 수 없습니다.\n" #: src/tree.c:192 #, c-format msgid "" "Can't open the %s file for writing:\n" "%s\n" msgstr "" "쓰기 위한 파일 %s를 열수 없어요:\n" "%s\n" #: src/tree.c:637 #, c-format msgid "Copy \"%s\" directory to:" msgstr "디렉토리 \"%s\"를 복사할 곳:" #: src/tree.c:675 #, c-format msgid "Move \"%s\" directory to:" msgstr "디렉토리 \"%s\"를 이동할 곳:" #: src/tree.c:682 #, c-format msgid "" " Can't stat the destination \n" " %s " msgstr "" " 대상 정보(stat)를 알아낼 수 없습니다 \n" " %s " #: src/tree.c:688 msgid " The destination isn't a directory " msgstr " 디렉토리이 아니네요 " #: src/tree.c:744 #, c-format msgid " Delete %s? " msgstr " %s를 지울까요? " #: src/tree.c:776 msgid "Static" msgstr "Static" #: src/tree.c:776 msgid "Dynamc" msgstr "Dynamc" #: src/tree.c:1012 msgid "Forget" msgstr "Forget" #: src/tree.c:1025 msgid "Rmdir" msgstr "Rmdir" #: src/treestore.c:360 #, c-format msgid "" "Can't write to the %s file:\n" "%s\n" msgstr "" "%s 파일에 쓸 수 없습니다:\n" "%s\n" #: src/user.c:250 #, c-format msgid " Invalid shell pattern definition \"%c\". " msgstr " \"%c\"는 알수 없는 명령해석기 패턴입니다. " #: src/user.c:383 msgid " Debug " msgstr " 디버그 " #: src/user.c:392 msgid " ERROR: " msgstr " 오류: " #: src/user.c:396 msgid " True: " msgstr " 사실: " #: src/user.c:398 msgid " False: " msgstr " 거짓: " #: src/user.c:602 msgid " Warning -- ignoring file " msgstr " 경고 -- 파일을 무시 " #: src/user.c:603 #, c-format msgid "" "File %s is not owned by root or you or is world writable.\n" "Using it may compromise your security" msgstr "" "%s 파일이 root 혹은 당신의 소유가 아니거나 누구든 쓰기 가능합니다.\n" "이 파일을 사용하는 것은 보안에 문제가 있습니다" #: src/user.c:622 msgid " I can't run programs while logged on a non local directory " msgstr " 원격지로 로깅한 상태에서는 풀그림을 실행할 수 없습니다 " #. FIXME: this message is not quite right #: src/user.c:720 #, c-format msgid " Empty file %s " msgstr " 빈 파일 %s " #. Create listbox #: src/user.c:730 msgid " User menu " msgstr " 사용자 메뉴 " #: src/util.c:232 msgid "name_trunc: too big" msgstr "name_trunc: 너무 길어서" #. strftime() format string for recent dates #: src/util.c:599 src/util.c:624 msgid "%b %e %H:%M" msgstr "%b %e %H:%M" #. strftime() format string for old dates #: src/util.c:600 src/util.c:622 msgid "%b %e %Y" msgstr "%b %e %Y" #: src/utilunix.c:382 msgid " Pipe failed " msgstr " 파이프 실패 " #: src/utilunix.c:386 msgid " Dup failed " msgstr " 복제 실패 " #: src/view.c:403 msgid "" "File: \n" "\n" " " msgstr "" "파일: \n" "\n" " " #: src/view.c:404 msgid "" "\n" "\n" "has been modified, do you want to save the changes?\n" msgstr "" "\n" "\n" "이 바뀌었어요. 바뀐 내용을 저장할까요?\n" #: src/view.c:406 msgid " Save changes " msgstr " 바뀐 내용 저장 " #: src/view.c:448 msgid " Can't spawn child program " msgstr " 자식(child) 풀그림을 실행할 수 없습니다 " #: src/view.c:457 msgid " Empty output from child filter " msgstr " 자식(child) 필터의 출력이 아무것도 없어요 " #: src/view.c:462 msgid " Could not open file " msgstr " 파일 열기 실패 " #: src/view.c:477 msgid " Can't open file \"" msgstr " 열 수 없는 파일: \"" #: src/view.c:484 msgid "" " Can't stat file \n" " " msgstr "" " 파일 정보를 얻을 수 없습니다 \n" " " #: src/view.c:490 msgid " Can't view: not a regular file " msgstr " 일반파일이 아니라 볼 수 없습니다 " #: src/view.c:571 #, c-format msgid "" " Can't open \"%s\"\n" " %s " msgstr "" " \"%s\"를 열 수 없습니다 \n" " %s " #: src/view.c:580 #, c-format msgid "" " Can't stat \"%s\"\n" " %s " msgstr "" " \"%s\" 파일정보를 얻을 수 없어요\n" " %s " #: src/view.c:716 #, c-format msgid "File: %s" msgstr "파일: %s" #: src/view.c:730 #, c-format msgid "Offset 0x%08x" msgstr "옵셋 0x%08x" #: src/view.c:741 msgid " [grow]" msgstr " [grow]" #: src/view.c:1520 #, c-format msgid "Searching for `%s'" msgstr "`%s' 찾는 중" #: src/view.c:1627 src/view.c:1750 msgid " Search string not found " msgstr " 글월을 찾을 수 없군요 " #: src/view.c:1789 msgid " Invalid regular expression " msgstr " 알수 없는 정규 표현식 " #: src/view.c:1913 #, c-format msgid "" " The current line number is %d.\n" " Enter the new line number:" msgstr "" " 현재 줄 번호는 %d입니다.\n" " 새로운 줄 번호을 입력:" #: src/view.c:1935 #, c-format msgid "" " The current address is 0x%lx.\n" " Enter the new address:" msgstr "" " 현재 주소는 0x%lx입니다.\n" " 새로운 주소 입력:" #: src/view.c:1937 msgid " Goto Address " msgstr " 주소 찾기 " #: src/view.c:1968 msgid " Enter regexp:" msgstr " 정규표현식 입력:" #: src/view.c:2073 msgid "Ascii" msgstr "아스키" #: src/view.c:2073 msgid "Hex" msgstr "십육진" #: src/view.c:2074 msgid "Goto" msgstr "Goto" #: src/view.c:2074 msgid "Line" msgstr "줄" #: src/view.c:2077 msgid "RxSrch" msgstr "RxSrch" #: src/view.c:2080 msgid "EdText" msgstr "EdText" #: src/view.c:2080 msgid "EdHex" msgstr "EdHex" #: src/view.c:2082 msgid "UnWrap" msgstr "UnWrap" #: src/view.c:2082 msgid "Wrap" msgstr "Wrap" #: src/view.c:2085 msgid "HxSrch" msgstr "HxSrch" #: src/view.c:2088 msgid "Raw" msgstr "Raw" #: src/view.c:2088 msgid "Parse" msgstr "Parse" #: src/view.c:2092 msgid "Unform" msgstr "Unform" #: src/view.c:2092 msgid "Format" msgstr "Format" #: src/widget.c:995 msgid " History " msgstr " 히스토리 " #. KEY_F(0) is not here, since we are mapping it to f10, so there is no reason #. to define f0 as well. Also, it makes Learn keys a bunch of problems :( #: src/win.c:224 msgid "Function key 1" msgstr "Function key 1" #: src/win.c:225 msgid "Function key 2" msgstr "Function key 2" #: src/win.c:226 msgid "Function key 3" msgstr "Function key 3" #: src/win.c:227 msgid "Function key 4" msgstr "Function key 4" #: src/win.c:228 msgid "Function key 5" msgstr "Function key 5" #: src/win.c:229 msgid "Function key 6" msgstr "Function key 6" #: src/win.c:230 msgid "Function key 7" msgstr "Function key 7" #: src/win.c:231 msgid "Function key 8" msgstr "Function key 8" #: src/win.c:232 msgid "Function key 9" msgstr "Function key 9" #: src/win.c:233 msgid "Function key 10" msgstr "Function key 10" #: src/win.c:234 msgid "Function key 11" msgstr "Function key 11" #: src/win.c:235 msgid "Function key 12" msgstr "Function key 12" #: src/win.c:236 msgid "Function key 13" msgstr "Function key 13" #: src/win.c:237 msgid "Function key 14" msgstr "Function key 14" #: src/win.c:238 msgid "Function key 15" msgstr "Function key 15" #: src/win.c:239 msgid "Function key 16" msgstr "Function key 16" #: src/win.c:240 msgid "Function key 17" msgstr "Function key 17" #: src/win.c:241 msgid "Function key 18" msgstr "Function key 18" #: src/win.c:242 msgid "Function key 19" msgstr "Function key 19" #: src/win.c:243 msgid "Function key 20" msgstr "Function key 20" #: src/win.c:244 msgid "Backspace key" msgstr "Backspace key" #: src/win.c:245 msgid "End key" msgstr "End key" #: src/win.c:246 msgid "Up arrow key" msgstr "Up arrow key" #: src/win.c:247 msgid "Down arrow key" msgstr "Down arrow key" #: src/win.c:248 msgid "Left arrow key" msgstr "Left arrow key" #: src/win.c:249 msgid "Right arrow key" msgstr "Right arrow key" #: src/win.c:250 msgid "Home key" msgstr "Home key" #: src/win.c:251 msgid "Page Down key" msgstr "Page Down key" #: src/win.c:252 msgid "Page Up key" msgstr "Page Up key" #: src/win.c:253 msgid "Insert key" msgstr "Insert key" #: src/win.c:254 msgid "Delete key" msgstr "Delete key" #: src/win.c:255 msgid "Completion/M-tab" msgstr "Completion/M-tab" #: src/win.c:256 msgid "+ on keypad" msgstr "+ on keypad" #: src/win.c:257 msgid "- on keypad" msgstr "- on keypad" #: src/win.c:258 msgid "* on keypad" msgstr "* on keypad" #. From here on, these won't be shown in Learn keys (no space) #: src/win.c:260 msgid "Left arrow keypad" msgstr "Left arrow keypad" #: src/win.c:261 msgid "Right arrow keypad" msgstr "Right arrow keypad" #: src/win.c:262 msgid "Up arrow keypad" msgstr "Up arrow keypad" #: src/win.c:263 msgid "Down arrow keypad" msgstr "Down arrow keypad" #: src/win.c:264 msgid "Home on keypad" msgstr "Home on keypad" #: src/win.c:265 msgid "End on keypad" msgstr "End on keypad" #: src/win.c:266 msgid "Page Down keypad" msgstr "Page Down keypad" #: src/win.c:267 msgid "Page Up keypad" msgstr "Page Up keypad" #: src/win.c:268 msgid "Insert on keypad" msgstr "Insert on keypad" #: src/win.c:269 msgid "Delete on keypad" msgstr "Delete on keypad" #: src/win.c:270 msgid "Enter on keypad" msgstr "Enter on keypad" #: src/win.c:271 msgid "Slash on keypad" msgstr "Slash on keypad" #: src/win.c:272 msgid "NumLock on keypad" msgstr "NumLock on keypad" #: vfs/cpio.c:141 vfs/cpio.c:157 #, c-format msgid "" "Couldn't open cpio archive\n" "%s" msgstr "" "cpio 아카이브 파일을 열 수 없습니다\n" "%s" #: vfs/cpio.c:224 #, c-format msgid "" "Premature end of cpio archive\n" "%s" msgstr "" #: vfs/cpio.c:309 vfs/cpio.c:358 #, c-format msgid "" "Corrupt cpio header encountered in\n" "%s" msgstr "" #: vfs/cpio.c:427 #, c-format msgid "" "Inconsistent hardlinks of\n" "%s\n" "in cpio archive\n" "%s" msgstr "" #. In case entry is already there #. This shouldn't happen! (well, it can happen if there is a record for a #. file and than a record for a directory it is in; cpio would die with #. 'No such file or directory' is such case) #. This can be considered archive inconsistency #: vfs/cpio.c:450 #, c-format msgid "%s contains duplicit entries! Skiping!" msgstr "%s가 이상한 엔트리를 포함하고 있습니다! 건너뜀!" #: vfs/cpio.c:517 #, c-format msgid "" "Unexpected end of file\n" "%s" msgstr "" "파일 %s에서\n" "기대되지 않은 EOF" #: vfs/direntry.c:300 #, c-format msgid "Dir cache expired for %s" msgstr "%s의 디렉토리 캐쉬 만료됨" #: vfs/direntry.c:430 vfs/direntry.c:433 msgid " Direntry warning " msgstr " 디렉토리 경고 " #: vfs/direntry.c:430 #, c-format msgid "Super ino_usage is %d, memory leak" msgstr "" #: vfs/direntry.c:433 msgid "Super has want_stale set" msgstr "" #: vfs/direntry.c:811 msgid "Starting linear transfer..." msgstr "Linear 전송 시작함..." #: vfs/direntry.c:956 msgid "Getting file" msgstr "파일 받음" #: vfs/extfs.c:270 #, c-format msgid "" "Couldn't open %s archive\n" "%s" msgstr "" "%s 아카이브 파일을 열 수 없습니다\n" "%s" #: vfs/extfs.c:302 vfs/extfs.c:322 msgid "Inconsistent extfs archive" msgstr "모순된 extfs 아카이브" #: vfs/fish.c:140 #, c-format msgid "fish: Disconnecting from %s" msgstr "fish: %s로부터 연결 끊어짐" #: vfs/fish.c:218 msgid "fish: Waiting for initial line..." msgstr "fish: 초기 라인을 기다리는 중..." #: vfs/fish.c:228 msgid "Sorry, we can not do password authenticated connections for now." msgstr "미안합니다. 아직 비밀번호 인증 연결은 할 수 없습니다." #: vfs/fish.c:233 msgid " fish: Password required for " msgstr " fish: Password required for " #: vfs/fish.c:242 msgid "fish: Sending password..." msgstr "fish: 사용자 비밀번호 보냄..." #: vfs/fish.c:248 msgid "fish: Sending initial line..." msgstr "fish: 초기 라인 보냄..." #: vfs/fish.c:252 msgid "fish: Handshaking version..." msgstr "fish: 핸드쉐이킹 버젼..." #: vfs/fish.c:256 msgid "fish: Setting up current directory..." msgstr "fish: 현재 디렉토리 설정중..." #: vfs/fish.c:258 #, c-format msgid "fish: Connected, home %s." msgstr "fish: 연결됨, 홈은 %s." #: vfs/fish.c:347 #, c-format msgid "fish: Reading directory %s..." msgstr "fish: 디렉토리 %s 읽는 중..." #: vfs/fish.c:451 msgid "fish: failed" msgstr "fish: 실패" #. Use this as stor: ( dd block ; dd smallblock ) | ( cat > file; cat > /dev/null ) #: vfs/fish.c:471 #, c-format msgid "fish: store %s: sending command..." msgstr "fish: %s 저장: 명령 보냄..." #: vfs/fish.c:496 msgid "fish: Local read failed, sending zeros" msgstr "fish: 로컬 읽기 실패. 0을 보냄" #: vfs/fish.c:508 #, c-format msgid "fish: storing %s %d (%d)" msgstr "fish: %s %d 저장 (%d)" #: vfs/fish.c:509 msgid "zeros" msgstr "" #: vfs/fish.c:556 msgid "Aborting transfer..." msgstr "송신 중단..." #: vfs/fish.c:565 msgid "Error reported after abort." msgstr "중단 후에 에러 보고됨." #: vfs/fish.c:567 msgid "Aborted transfer would be successful." msgstr "송신이 성공적으로 중단되었습니다." #: vfs/ftpfs.c:318 #, c-format msgid "ftpfs: Disconnecting from %s" msgstr "ftpfs: %s로부터 연결 끊어짐" #: vfs/ftpfs.c:376 msgid " FTP: Password required for " msgstr " FTP: Password required for " #: vfs/ftpfs.c:409 msgid " Proxy: Password required for " msgstr " Proxy: Password required for " #: vfs/ftpfs.c:435 msgid "ftpfs: sending proxy login name" msgstr "ftpfs: 프록시 로그인 이름 보냄" #: vfs/ftpfs.c:439 msgid "ftpfs: sending proxy user password" msgstr "ftpfs: 프록시 사용자 비밀번호 보냄" #: vfs/ftpfs.c:443 msgid "ftpfs: proxy authentication succeeded" msgstr "ftpfs: 프록시 인증 성공" #: vfs/ftpfs.c:447 #, c-format msgid "ftpfs: connected to %s" msgstr "ftpfs: %s로 연결됨" #: vfs/ftpfs.c:464 msgid "ftpfs: sending login name" msgstr "ftpfs: 로그인 이름 보냄" #: vfs/ftpfs.c:469 msgid "ftpfs: sending user password" msgstr "ftpfs: 사용자 비밀번호 보냄" #: vfs/ftpfs.c:474 msgid "ftpfs: logged in" msgstr "ftpfs: 로그 인" #: vfs/ftpfs.c:489 #, c-format msgid "ftpfs: Login incorrect for user %s " msgstr "ftpfs: Login incorrect for user %s " #: vfs/ftpfs.c:521 #, c-format msgid " Could not set source routing (%s)" msgstr " 소스 라우팅 (%s)를 설정할 수 없습니다" #: vfs/ftpfs.c:647 msgid "ftpfs: Invalid host name." msgstr "ftpfs: 유효하지 않은 호스트 이름." #: vfs/ftpfs.c:667 msgid "ftpfs: Invalid host address." msgstr "ftpfs: 유효하지 않은 호스트 주소." #: vfs/ftpfs.c:690 #, c-format msgid "ftpfs: making connection to %s" msgstr "ftpfs: %s로 연결 시도중" #: vfs/ftpfs.c:700 msgid "ftpfs: connection interrupted by user" msgstr "ftpfs: 사용자에 의해 연결 중단됨" #: vfs/ftpfs.c:702 #, c-format msgid "ftpfs: connection to server failed: %s" msgstr "ftpfs: 서버로 연결 실패: %s" #: vfs/ftpfs.c:744 #, c-format msgid "Waiting to retry... %d (Control-C to cancel)" msgstr "재시도 기다림... %d (취소하려면 Control-C)" #: vfs/ftpfs.c:930 msgid "ftpfs: could not setup passive mode" msgstr "ftpfs: 수동 모드로 설정할 수 없습니다" #: vfs/ftpfs.c:1005 msgid "ftpfs: aborting transfer." msgstr "ftpfs: 송신 중단됨." #: vfs/ftpfs.c:1007 #, c-format msgid "ftpfs: abort error: %s" msgstr "ftpfs: 중단 에러: %s" #: vfs/ftpfs.c:1012 msgid "ftpfs: abort failed" msgstr "ftpfs: 중단 실패" #: vfs/ftpfs.c:1101 vfs/ftpfs.c:1200 msgid "ftpfs: CWD failed." msgstr "ftpfs: CWD 실패." #: vfs/ftpfs.c:1111 vfs/ftpfs.c:1118 msgid "ftpfs: couldn't resolve symlink" msgstr "ftpfs: 심볼릭링크를 해석할 수 없습니다" #: vfs/ftpfs.c:1169 msgid "Resolving symlink..." msgstr "심볼릭링크 해석..." #: vfs/ftpfs.c:1188 #, c-format msgid "ftpfs: Reading FTP directory %s... %s%s" msgstr "ftpfs: FTP 디렉토리 %s 읽는 중... %s%s" #: vfs/ftpfs.c:1189 msgid "(strict rfc959)" msgstr "(strict rfc959)" #: vfs/ftpfs.c:1190 msgid "(chdir first)" msgstr "(chdir first)" #: vfs/ftpfs.c:1287 msgid "ftpfs: failed" msgstr "ftpfs: 실패" #: vfs/ftpfs.c:1297 msgid "ftpfs: failed; nowhere to fallback to" msgstr "ftpfs: 실패; nowhere to fallback to" #: vfs/ftpfs.c:1360 #, c-format msgid "ftpfs: storing file %d (%d)" msgstr "ftpfs: 파일 저장 %d (%d)" #: vfs/ftpfs.c:1775 msgid "" "~/.netrc file has not correct mode.\n" "Remove password or correct mode." msgstr "" "~/.netrc 파일의 모드가 잘못되었습니다.\n" "비밀번호를 지우거나 모드를 고치십시오." #: vfs/mcfs.c:156 vfs/mcfs.c:178 vfs/mcfs.c:204 msgid " MCFS " msgstr " MCFS " #: vfs/mcfs.c:156 msgid " The server does not support this version " msgstr " 서버가 이 판번호을 지원하지 않습니다 " #: vfs/mcfs.c:173 msgid "" " The remote server is not running on a system port \n" " you need a password to log in, but the information may \n" " not be safe on the remote side. Continue? \n" msgstr "" " 원격 서버가 시스템 포트를 사용하고 있지 않습니다 \n" " 로그인하려면 비밀번호가 필요합니다만 비밀번호의 사용은 \n" " 원격 서버쪽에서는 안전하지 않습니다. 계속할까요? \n" #: vfs/mcfs.c:176 msgid " Yes " msgstr " 예 " #: vfs/mcfs.c:176 msgid " No " msgstr " 아니오 " #: vfs/mcfs.c:178 msgid " The remote server is running on strange port. Giving up.\n" msgstr " 원격서버가 이상한 포트를 사용하고 있습니다. 포기합니다.\n" #: vfs/mcfs.c:190 msgid " MCFS Password required " msgstr " MCFS 비밀번호 요구됨 " #: vfs/mcfs.c:204 msgid " Invalid password " msgstr " 틀린 비밀번호 " #: vfs/mcfs.c:235 #, c-format msgid " Can't locate hostname: %s " msgstr " 호스트 위치를 알 수 없음: %s " #: vfs/mcfs.c:253 #, c-format msgid " Can't create socket: %s " msgstr " 소켓을 생성할 수 없음: %s " #: vfs/mcfs.c:259 #, c-format msgid " Can't connect to server: %s " msgstr " 서버로 연결할 수 없음: %s " #: vfs/mcfs.c:324 msgid " Too many open connections " msgstr " 너무 많은 연결이 이루어짐 " #. This is place of next pointer #: vfs/mcfs.c:1127 msgid "Midnight Commander's private remote filesystem" msgstr "" #: vfs/smbfs.c:116 msgid "Domain:" msgstr "도메인:" #: vfs/smbfs.c:116 msgid "Username:" msgstr "사용자명:" #: vfs/smbfs.c:116 msgid "Password: " msgstr "비밀번호: " #: vfs/smbfs.c:171 #, c-format msgid "Password for \\\\%s\\%s" msgstr "\\\\%s\\%s의 비밀번호" #: vfs/smbfs.c:667 #, c-format msgid "" " reconnect to %s failed\n" " " msgstr "" " %s로의 재연결 실패\n" " " #: vfs/smbfs.c:1243 msgid " Authentication failed " msgstr "" #: vfs/smbfs.c:1738 #, c-format msgid " %s mkdir'ing %s " msgstr " %s mkdir'ing %s " #: vfs/smbfs.c:1759 #, c-format msgid " %s rmdir'ing %s " msgstr " %s rmdir'ing %s " #: vfs/smbfs.c:1868 vfs/smbfs.c:1888 vfs/smbfs.c:1949 #, c-format msgid " %s opening remote file %s " msgstr " %s opening remote file %s " #: vfs/smbfs.c:1972 #, c-format msgid " %s renaming files\n" msgstr " %s renaming files\n" #: vfs/tar.c:84 vfs/tar.c:101 #, c-format msgid "" "Couldn't open tar archive\n" "%s" msgstr "" "테잎 아카이브 파일을 열 수 없습니다\n" "%s" #: vfs/tar.c:284 msgid "Unexpected EOF on archive file" msgstr "아카이브 파일에서 기대되지 않은 EOF" #: vfs/tar.c:339 vfs/tar.c:346 msgid "Inconsistent tar archive" msgstr "잘못된 테잎 아카이브" #: vfs/tar.c:411 #, c-format msgid "" "Hmm,...\n" "%s\n" "doesn't look like a tar archive." msgstr "" "흠,...\n" "%s\n" "테잎 아카이브 파일같지 않습니다." #: vfs/vfs.c:1153 msgid "Changes to file lost" msgstr "" #: vfs/vfs.c:1847 msgid "Could not parse:" msgstr "분석할 수 없음:" #: vfs/vfs.c:1849 msgid "More parsing errors will be ignored." msgstr "앞으로의 분석에러는 무시될 것입니다." #: vfs/vfs.c:1849 msgid "(sorry)" msgstr "(미안)" #: vfs/vfs.c:1860 msgid "Internal error:" msgstr "내부 오류:" #: vfs/vfs.c:1870 msgid "%s: %s: %s %3d%% (%ld bytes transfered)" msgstr "%s: %s: %s %3d%% (%ld 바이트 송신)" #: vfs/vfs.c:1871 #, c-format msgid "%s: %s: %s %ld bytes transfered" msgstr "%s: %s: %s %ld 바이트 송신됨" #: vfs/undelfs.c:81 msgid " undelfs: error " msgstr " undelfs: 에러 " #: vfs/undelfs.c:184 msgid " not enough memory " msgstr "" #: vfs/undelfs.c:189 msgid " while allocating block buffer " msgstr "" #: vfs/undelfs.c:193 #, c-format msgid " open_inode_scan: %d " msgstr "" #: vfs/undelfs.c:197 #, c-format msgid " while starting inode scan %d " msgstr "" #: vfs/undelfs.c:204 #, c-format msgid "undelfs: loading deleted files information %d inodes" msgstr "" #: vfs/undelfs.c:219 #, c-format msgid " while calling ext2_block_iterate %d " msgstr "" #: vfs/undelfs.c:227 msgid " no more memory while reallocating array " msgstr "" #: vfs/undelfs.c:246 #, c-format msgid " while doing inode scan %d " msgstr "" #: vfs/undelfs.c:270 msgid " Ext2lib error " msgstr " Ext2lib 에러 " #: vfs/undelfs.c:297 #, c-format msgid " Could not open file %s " msgstr " %s 파일을 열 수 없습니다 " #: vfs/undelfs.c:300 msgid "undelfs: reading inode bitmap..." msgstr "undelfs: inode 비트맵을 읽는 중..." #: vfs/undelfs.c:303 #, c-format msgid "" " Could not load inode bitmap from: \n" " %s \n" msgstr "" " 다음에서 inode 비트맵을 읽을 수 없음: \n" " %s \n" #: vfs/undelfs.c:306 msgid "undelfs: reading block bitmap..." msgstr "" #: vfs/undelfs.c:309 #, c-format msgid "" " Could not load block bitmap from: \n" " %s \n" msgstr "" #: vfs/undelfs.c:315 msgid "undelfs: done." msgstr "undelfs: 끝남." #: vfs/undelfs.c:318 msgid "undelfs: failure" msgstr "undelfs: 실패" #: vfs/undelfs.c:342 msgid " vfs_info is not fs! " msgstr "" #: vfs/undelfs.c:398 vfs/undelfs.c:582 msgid " You have to chdir to extract files first " msgstr "" #: vfs/undelfs.c:521 msgid " while iterating over blocks " msgstr "" #: vfs/undelfs.c:626 #, c-format msgid " Could not open file: %s " msgstr " 파일 열기 실패: %s " #. This is place of next pointer #: vfs/undelfs.c:684 msgid "Undelete filesystem for ext2" msgstr "ext2에서의 파일복구 시스템"