libssh/doc/mainpage.dox
Jakub Jelen daabd78742 Remove remaining mentions of SSH-v1 protocol
also remove anything mentioning limitation to SSHv2 as it is the only
protocol supported these days.

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
2022-06-09 09:08:02 +02:00

255 lines
12 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
@mainpage
This is the online reference for developing with the libssh library. It
documents the libssh C API and the C++ wrapper.
@section main-linking Linking
We created a small howto how to link libssh against your application, read
@subpage libssh_linking.
@section main-tutorial Tutorial
You should start by reading @subpage libssh_tutorial, then reading the documentation of
the interesting functions as you go.
@section main-features Features
The libssh library provides:
- <strong>Key Exchange Methods</strong>: <i>curve25519-sha256, curve25519-sha256@libssh.org, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521</i>, diffie-hellman-group1-sha1, diffie-hellman-group14-sha1
- <strong>Public Key Algorithms</strong>: ssh-ed25519, ecdsa-sha2-nistp256, ecdsa-sha2-nistp384, ecdsa-sha2-nistp521, ssh-rsa, rsa-sha2-512, rsa-sha2-256,ssh-dss
- <strong>Ciphers</strong>: <i>aes256-ctr, aes192-ctr, aes128-ctr</i>, aes256-cbc (rijndael-cbc@lysator.liu.se), aes192-cbc, aes128-cbc, 3des-cbc, blowfish-cbc
- <strong>Compression Schemes</strong>: zlib, <i>zlib@openssh.com</i>, none
- <strong>MAC hashes</strong>: hmac-sha1, hmac-sha2-256, hmac-sha2-512, hmac-md5
- <strong>Authentication</strong>: none, password, public-key, keyboard-interactive, <i>gssapi-with-mic</i>
- <strong>Channels</strong>: shell, exec (incl. SCP wrapper), direct-tcpip, subsystem, <i>auth-agent-req@openssh.com</i>
- <strong>Global Requests</strong>: tcpip-forward, forwarded-tcpip
- <strong>Channel Requests</strong>: x11, pty, <i>exit-status, signal, exit-signal, keepalive@openssh.com, auth-agent-req@openssh.com</i>
- <strong>Subsystems</strong>: sftp(version 3), <i>OpenSSH Extensions</i>
- <strong>SFTP</strong>: <i>statvfs@openssh.com, fstatvfs@openssh.com</i>
- <strong>Thread-safe</strong>: Just don't share sessions
- <strong>Non-blocking</strong>: it can be used both blocking and non-blocking
- <strong>Your sockets</strong>: the app hands over the socket, or uses libssh sockets
- <b>OpenSSL</b> or <b>gcrypt</b>: builds with either
@section main-additional-features Additional Features
- Client <b>and</b> server support
- SSHv2 protocol support
- Supports <a href="https://test.libssh.org/" target="_blank">Linux, UNIX, BSD, Solaris, OS/2 and Windows</a>
- Automated test cases with nightly <a href="https://test.libssh.org/" target="_blank">tests</a>
- Event model based on poll(2), or a poll(2)-emulation.
@section main-copyright Copyright Policy
libssh is a project with distributed copyright ownership, which means we prefer
the copyright on parts of libssh to be held by individuals rather than
corporations if possible. There are historical legal reasons for this, but one
of the best ways to explain it is that its much easier to work with
individuals who have ownership than corporate legal departments if we ever need
to make reasonable compromises with people using and working with libssh.
We track the ownership of every part of libssh via git, our source code control
system, so we know the provenance of every piece of code that is committed to
libssh.
So if possible, if youre doing libssh changes on behalf of a company who
normally owns all the work you do please get them to assign personal copyright
ownership of your changes to you as an individual, that makes things very easy
for us to work with and avoids bringing corporate legal departments into the
picture.
If you cant do this we can still accept patches from you owned by your
employer under a standard employment contract with corporate copyright
ownership. It just requires a simple set-up process first.
We use a process very similar to the way things are done in the Linux Kernel
community, so it should be very easy to get a sign off from your corporate
legal department. The only changes weve made are to accommodate the license we
use, which is LGPLv2 (or later) whereas the Linux kernel uses GPLv2.
The process is called signing.
How to sign your work
----------------------
Once you have permission to contribute to libssh from your employer, simply
email a copy of the following text from your corporate email address to:
contributing@libssh.org
@verbatim
libssh Developer's Certificate of Origin. Version 1.0
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the appropriate
version of the GNU General Public License; or
(b) The contribution is based upon previous work that, to the best of
my knowledge, is covered under an appropriate open source license
and I have the right under that license to submit that work with
modifications, whether created in whole or in part by me, under
the GNU General Public License, in the appropriate version; or
(c) The contribution was provided directly to me by some other
person who certified (a) or (b) and I have not modified it.
(d) I understand and agree that this project and the contribution are
public and that a record of the contribution (including all
metadata and personal information I submit with it, including my
sign-off) is maintained indefinitely and may be redistributed
consistent with the libssh Team's policies and the requirements of
the GNU GPL where they are relevant.
(e) I am granting this work to this project under the terms of the
GNU Lesser General Public License as published by the
Free Software Foundation; either version 2.1 of
the License, or (at the option of the project) any later version.
https://www.gnu.org/licenses/lgpl-2.1.html
@endverbatim
We will maintain a copy of that email as a record that you have the rights to
contribute code to libssh under the required licenses whilst working for the
company where the email came from.
Then when sending in a patch via the normal mechanisms described above, add a
line that states:
@verbatim
Signed-off-by: Random J Developer <random@developer.example.org>
@endverbatim
using your real name and the email address you sent the original email you used
to send the libssh Developers Certificate of Origin to us (sorry, no
pseudonyms or anonymous contributions.)
Thats it! Such code can then quite happily contain changes that have copyright
messages such as:
@verbatim
(c) Example Corporation.
@endverbatim
and can be merged into the libssh codebase in the same way as patches from any
other individual. You dont need to send in a copy of the libssh Developers
Certificate of Origin for each patch, or inside each patch. Just the sign-off
message is all that is required once weve received the initial email.
Have fun and happy libssh hacking!
The libssh Team
@section main-rfc Internet standard
@subsection main-rfc-secsh Secure Shell (SSH)
The following RFC documents described SSH-2 protcol as an Internet standard.
- <a href="https://tools.ietf.org/html/rfc4250" target="_blank">RFC 4250</a>,
The Secure Shell (SSH) Protocol Assigned Numbers
- <a href="https://tools.ietf.org/html/rfc4251" target="_blank">RFC 4251</a>,
The Secure Shell (SSH) Protocol Architecture
- <a href="https://tools.ietf.org/html/rfc4252" target="_blank">RFC 4252</a>,
The Secure Shell (SSH) Authentication Protocol
- <a href="https://tools.ietf.org/html/rfc4253" target="_blank">RFC 4253</a>,
The Secure Shell (SSH) Transport Layer Protocol
- <a href="https://tools.ietf.org/html/rfc4254" target="_blank">RFC 4254</a>,
The Secure Shell (SSH) Connection Protocol
- <a href="https://tools.ietf.org/html/rfc4255" target="_blank">RFC 4255</a>,
Using DNS to Securely Publish Secure Shell (SSH) Key Fingerprints
(not implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc4256" target="_blank">RFC 4256</a>,
Generic Message Exchange Authentication for the Secure Shell Protocol (SSH)
- <a href="https://tools.ietf.org/html/rfc4335" target="_blank">RFC 4335</a>,
The Secure Shell (SSH) Session Channel Break Extension
- <a href="https://tools.ietf.org/html/rfc4344" target="_blank">RFC 4344</a>,
The Secure Shell (SSH) Transport Layer Encryption Modes
- <a href="https://tools.ietf.org/html/rfc4345" target="_blank">RFC 4345</a>,
Improved Arcfour Modes for the Secure Shell (SSH) Transport Layer Protocol
It was later modified and expanded by the following RFCs.
- <a href="https://tools.ietf.org/html/rfc4419" target="_blank">RFC 4419</a>,
Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer
Protocol
- <a href="https://tools.ietf.org/html/rfc4432" target="_blank">RFC 4432</a>,
RSA Key Exchange for the Secure Shell (SSH) Transport Layer Protocol
(not implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc4462" target="_blank">RFC 4462</a>,
Generic Security Service Application Program Interface (GSS-API)
Authentication and Key Exchange for the Secure Shell (SSH) Protocol
(only the authentication implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc4716" target="_blank">RFC 4716</a>,
The Secure Shell (SSH) Public Key File Format
(not implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc5647" target="_blank">RFC 5647</a>,
AES Galois Counter Mode for the Secure Shell Transport Layer Protocol
(the algorithm negotiation implemented according to openssh.com)
- <a href="https://tools.ietf.org/html/rfc5656" target="_blank">RFC 5656</a>,
Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer
- <a href="https://tools.ietf.org/html/rfc6594" target="_blank">RFC 6594</a>,
Use of the SHA-256 Algorithm with RSA, DSA, and ECDSA in SSHFP Resource Records
(not implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc6668" target="_blank">RFC 6668</a>,
SHA-2 Data Integrity Verification for the Secure Shell (SSH) Transport Layer Protocol
- <a href="https://tools.ietf.org/html/rfc7479" target="_blank">RFC 7479</a>,
Using Ed25519 in SSHFP Resource Records
(not implemented in libssh)
- <a href="https://tools.ietf.org/html/rfc8160" target="_blank">RFC 8160</a>,
IUTF8 Terminal Mode in Secure Shell (SSH)
(not handled in libssh)
- <a href="https://tools.ietf.org/html/rfc8270" target="_blank">RFC 8270</a>,
Increase the Secure Shell Minimum Recommended Diffie-Hellman Modulus Size to 2048 Bits
- <a href="https://tools.ietf.org/html/rfc8308" target="_blank">RFC 8308</a>,
Extension Negotiation in the Secure Shell (SSH) Protocol
(only the "server-sig-algs" extension implemented)
- <a href="https://tools.ietf.org/html/rfc8332" target="_blank">RFC 8332</a>,
Use of RSA Keys with SHA-256 and SHA-512 in the Secure Shell (SSH) Protocol
- <a href="https://tools.ietf.org/html/rfc8709" target="_blank">RFC 8709</a>,
Ed25519 and Ed448 Public Key Algorithms for the Secure Shell (SSH) Protocol
There are also drafts that are being currently developed and followed.
- <a href="https://tools.ietf.org/html/draft-ietf-curdle-ssh-kex-sha2-10" target="_blank">draft-ietf-curdle-ssh-kex-sha2-10</a>
Key Exchange (KEX) Method Updates and Recommendations for Secure Shell (SSH)
- <a href="https://tools.ietf.org/html/draft-miller-ssh-agent-03" target="_blank">draft-miller-ssh-agent-03</a>
SSH Agent Protocol
- <a href="https://tools.ietf.org/html/draft-ietf-curdle-ssh-curves-12" target="_blank">draft-ietf-curdle-ssh-curves-12</a>
Secure Shell (SSH) Key Exchange Method using Curve25519 and Curve448
Interesting cryptography documents:
- <a href="https://www.cryptsoft.com/pkcs11doc/" target="_blank">PKCS #11</a>, PKCS #11 reference documents, describing interface with smartcards.
@subsection main-rfc-sftp Secure Shell File Transfer Protocol (SFTP)
The protocol is not an Internet standard but it is still widely implemented.
OpenSSH and most other implementation implement Version 3 of the protocol. We
do the same in libssh.
- <a href="https://tools.ietf.org/html/draft-ietf-secsh-filexfer-02" target="_blank">
draft-ietf-secsh-filexfer-02.txt</a>,
SSH File Transfer Protocol
@subsection main-rfc-extensions Secure Shell Extensions
The OpenSSH project has defined some extensions to the protocol. We support some of
them like the statvfs calls in SFTP or the ssh-agent.
- <a href="https://api.libssh.org/rfc/PROTOCOL" target="_blank">
OpenSSH's deviations and extensions</a>
- <a href="https://api.libssh.org/rfc/PROTOCOL.certkeys" target="_blank">
OpenSSH's pubkey certificate authentication</a>
- <a href="https://api.libssh.org/rfc/PROTOCOL.chacha20poly1305" target="_blank">
chacha20-poly1305@openssh.com authenticated encryption mode</a>
- <a href="https://api.libssh.org/rfc/PROTOCOL.key" target="_blank">
OpenSSH private key format (openssh-key-v1)</a>
*/