Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
(cherry picked from commit bc0c027ac08303532001d2d258bedd4803d47865)
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
(cherry picked from commit 964df4dc290c631fe2ece74600e510ca6c0a7385)
Signed-off-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
(cherry picked from commit 21ef4881210d601f33c77fd9b9c7038dfe226281)
The tests are compiled without -D_GNU_SOURCE, therefore
the XSI version of strerror_r is used. Defining
_GNU_SOURCE in torture.h then including *.c gives error
because it is assuming GNU version of strerror_r in
the source file.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The cmocka captures all signals so I was not able to reproduce the code
path. But leaving the code in for future readers.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Thanks to Harry Sintonen from WithSecure for pointing this out.
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Remove config options: protocol, mac, cipher, compressionlevel,
gssapikeyexchange,
gssapirenewalforcesrekey,
gssapitrustdns,
rhostsrsaauthentication,
rsaauthentication,
useprivilegedport,
pubkeyacceptedtypes
since they are not supported by OpenSSH
Rename some config options:
hostbasedkeytypes, challengeresponseauthentication and pubkeyacceptedkeytypes
to hosbasedacceptedalgorithms, kdbinteractiveauthentication and pubkeyacceptedalgorithms
to be consistent with the OpenSSH manual https://man.openbsd.org/sshd_config.
Keep pubkeyacceptedkeytypes for backward compatibility.
Rename SOC_PUBKEYACCEPTEDTYPES to SOC_PUBKEYACCEPTEDKEYTYPES in config.h
Update unittests/torture_config.c and unittests/torture_options.c
Signed-off-by: Anh Minh Tran <anhminh@seznam.cz>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
The libssh versions before this included files with relative path based
on the current working directory, which can result unexpected results
and is different from the OpenSSH include behavior. The manual page for
ssh_config lists:
> iles without absolute paths are assumed to be in ~/.ssh if included in
> a user configuration file or /etc/ssh if included from the system
> configuration file.
This is following the semantics as close as possible with a difference
that we do not use the hardcoded ~/.ssh for user configuration files,
but the path defined with SSH_OPTIONS_SSH_DIR, which is already used
to reference any other files in used home directory.
Fixes#93
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Currently Compression=no (the default) force-disables zlib algos, while
Compression=yes force-enables it. This means that mismatching options between
client and server lead to connection failure. This can easily happen if the
server has default settings but the client specifies Compression=yes.
OpenSSH treats the option as a "prefer compression" setting:
Compression=no -> none,zlib@openssh.com,zlib (default)
Compression=yes -> zlib@openssh.com,zlib,none
This commit changes the libssh behaviour to the same as OpenSSH.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Normally, the length of session_id and secret_hash is the same,
but if we will get into rekeying with a peer that changes preference
of key exchange algorithm, the new secret hash can be larger or
smaller than the previous session_id causing invalid reads or writes.
Resolves https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=35485
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Another item identified during code review was cases where the return
value of ssh_list_new() was not properly checked and handled. This
updates all cases that were missing this to handle failure to allocate a
new list.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
These calls can fail and the return code should always be checked. These
issues were identified when code review called it out on new code. The
updates here are to existing code with no behavior changes to make
review simpler.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
In https://gitlab.com/libssh/libssh-mirror/-/merge_requests/145#note_463232084
behavior in libssh was identified where it diverges from how for example
OpenSSH behaves. In OpenSSH if a request success of failure message is
received, apart from it being treated as a keepalive message, it is
ignored otherwise.
Libssh does handle the unexpected message and triggers an error
condition internally. This means that with the Dropbear behavior where
it replies to a hostkeys-00@openssh.com message even with a want_reply
= 0 (arguably a bug), libssh enters an error state.
This change makes the libssh behavior match OpenSSH to ignore these
messages. The spec is a bit unclear on whether Dropbear is buggy here or
not, but let's be liberal with the input accepted here in libssh.
Signed-off-by: Dirkjan Bussink <d.bussink@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Stanislav Zidek <szidek@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
ssh_pki_export_pubkey_blob() is incorrectly used to export ecdsa pubkeys from privkeys
when pubkeys are not imported into pkcs #11 tokens.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
determines if public keys must be loaded in pkcs #11 tokens or not.
tests: Adds the load_public parameter in all files where torture_setup_tokens() was used.
Signed-off-by: Sahana Prasad <sahana@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The introduced function returns whether the library is initialized or
not.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
v3:
- add tests for malformed encrypted inputs
v2:
- use proper size key for chacha20poly1305
- make copy of cleartext for chacha20poly1305 test-case
- update chacha20_encrypted
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Given a string, the added function encodes existing newline characters
('\n') as the string "\\n" and puts into a given output buffer.
The output buffer must have at least 2 times the length of the input
string plus 1 for the terminating '\0'. In the worst case, each
character can be replaced by 2 characters.
Fixes T189
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Previously, there was non-consistent usage of constans SSH_KEX_METHODS,
KEX_METHODS_SIZE and of magic number 10 to reference the arrays used
for algorithm negotiation by peers. This commit settles down to the single
constant and its usage throughout the whole codebase.
Fixes T195
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
This adds support for Ed25519 keys from files in PEM format when using
OpenSSL with Ed25519 support. The default encoding for the PEM file is
expected to be PKCS#8. Encrypted files are supported.
For the lack of an API, it is not possible to export keys in PEM format,
only in OpenSSH format.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This removes unused function pki_signature_verify()
from pki_{crypto, mbedcrypto, gcrypt}. The function was also removed
from include/libssh/pki_priv.h. The function ssh_pki_signature_verify()
was changed to receive a const unsigned char *input.
All tests calling pki_signature_verify() were changed to call
ssh_pki_signature_verify() instead.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Use OpenSSL to generate and verify Ed25519 signatures, if supported.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
