doc: fix up various typos and trailing whitespace

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>

doc/authentication.dox

@@ -187,7 +187,7 @@ keyboard-interactive authentication, coming from the RFC itself (rfc4256):
   the name and prompts. If the server presents names or prompts longer than 30
   characters, the client MAY truncate these fields to the length it can
   display. If the client does truncate any fields, there MUST be an obvious
-  indication that such truncation has occured.
+  indication that such truncation has occurred.
 
   The instruction field SHOULD NOT be truncated. Clients SHOULD use control
   character filtering as discussed in [SSH-ARCH] to avoid attacks by

doc/forwarding.dox

@@ -4,7 +4,7 @@
 
 Port forwarding comes in SSH protocol in two different flavours:
 direct or reverse port forwarding. Direct port forwarding is also
-named local port forwardind, and reverse port forwarding is also called
+named local port forwarding, and reverse port forwarding is also called
 remote port forwarding. SSH also allows X11 tunnels.
 
 
@@ -26,12 +26,12 @@ Mail client application   Google Mail
     SSH client   =====>   SSH server
 
 Legend:
---P-->: port connexion through port P
+--P-->: port connections through port P
 =====>: SSH tunnel
 @endverbatim
 A mail client connects to port 5555 of a client. An encrypted tunnel is
 established to the server. The server connects to port 143 of Google Mail (the
-end point). Now the local mail client can retreive mail.
+end point). Now the local mail client can retrieve mail.
 
 
 @subsection forwarding_reverse Reverse port forwarding
@@ -51,7 +51,7 @@ Example of use of reverse port forwarding:
     SSH client   <=====   SSH server
 
 Legend:
---P-->: port connexion through port P
+--P-->: port connections through port P
 =====>: SSH tunnel
 @endverbatim
 In this example, the SSH client establishes the tunnel,
@@ -148,9 +148,9 @@ To do reverse port forwarding, call ssh_channel_listen_forward(),
 then ssh_channel_accept_forward().
 
 When you call ssh_channel_listen_forward(), you can let the remote server
-chose the non-priviledged port it should listen to. Otherwise, you can chose
-your own priviledged or non-priviledged port. Beware that you should have
-administrative priviledges on the remote server to open a priviledged port
+chose the non-privileged port it should listen to. Otherwise, you can chose
+your own privileged or non-privileged port. Beware that you should have
+administrative privileges on the remote server to open a privileged port
 (port number < 1024).
 
 Below is an example of a very rough web server waiting for connections on port

doc/guided_tour.dox

@@ -42,7 +42,7 @@ you'll usually open a "sftp session" or a "scp session".
 
 The most important object in a SSH connection is the SSH session. In order
 to allocate a new SSH session, you use ssh_new(). Don't forget to
-always verify that the allocation successed.
+always verify that the allocation succeeded.
 @code
 #include <libssh/libssh.h>
 #include <stdlib.h>
@@ -285,9 +285,9 @@ int verify_knownhost(ssh_session session)
 
 The authentication process is the way a service provider can identify a
 user and verify his/her identity. The authorization process is about enabling
-the authenticated user the access to ressources. In SSH, the two concepts
+the authenticated user the access to resources. In SSH, the two concepts
 are linked. After authentication, the server can grant the user access to
-several ressources such as port forwarding, shell, sftp subsystem, and so on.
+several resources such as port forwarding, shell, sftp subsystem, and so on.
 
 libssh supports several methods of authentication:
  - "none" method. This method allows to get the available authentications
@@ -338,7 +338,7 @@ int main()
   }
 
   // Verify the server's identity
-  // For the source code of verify_knowhost(), check previous example
+  // For the source code of verify_knownhost(), check previous example
   if (verify_knownhost(my_ssh_session) < 0)
   {
     ssh_disconnect(my_ssh_session);
@@ -456,7 +456,7 @@ might be recoverable. SSH_FATAL means the connection has an important
 problem and isn't probably recoverable.
 
 Most of time, the error returned are SSH_FATAL, but some functions
-(generaly the ssh_request_xxx ones) may fail because of server denying request.
+(generally the ssh_request_xxx ones) may fail because of server denying request.
 In these cases, SSH_REQUEST_DENIED is returned.
 
 For thread safety, errors are bound to ssh_session objects.

doc/introduction.dox

@@ -12,13 +12,13 @@ mean that you should not try to know about and understand these details.
 
 libssh is a Free Software / Open Source project. The libssh library
 is distributed under LGPL license. The libssh project has nothing to do with
-"libssh2", which is a completly different and independant project.
+"libssh2", which is a completely different and independent project.
 
 libssh can run on top of either libgcrypt or libcrypto,
 two general-purpose cryptographic libraries.
 
 This tutorial concentrates for its main part on the "client" side of libssh.
-To learn how to accept incoming SSH connexions (how to write a SSH server),
+To learn how to accept incoming SSH connections (how to write a SSH server),
 you'll have to jump to the end of this document.
 
 This tutorial describes libssh version 0.5.0. This version is a little different

doc/scp.dox

@@ -2,7 +2,7 @@
 @page libssh_tutor_scp Chapter 6: The SCP subsystem
 @section scp_subsystem The SCP subsystem
 
-The SCP subsystem has far less functionnality than the SFTP subsystem.
+The SCP subsystem has far less functionality than the SFTP subsystem.
 However, if you only need to copy files from and to the remote system,
 it does its job.
 
@@ -210,7 +210,7 @@ int scp_receive(ssh_session session, ssh_scp scp)
   size = ssh_scp_request_get_size(scp);
   filename = strdup(ssh_scp_request_get_filename(scp));
   mode = ssh_scp_request_get_permissions(scp);
-  printf("Receiving file %s, size %d, permisssions 0%o\n",
+  printf("Receiving file %s, size %d, permissions 0%o\n",
           filename, size, mode);
   free(filename);
 

doc/sftp.dox

@@ -100,7 +100,7 @@ Possible errors are:
 
 @subsection sftp_mkdir Creating a directory
 
-The function sftp_mkdir() tahes the "SFTP session" we juste created as
+The function sftp_mkdir() takes the "SFTP session" we just created as
 its first argument. It also needs the name of the file to create, and the
 desired permissions. The permissions are the same as for the usual mkdir()
 function. To get a comprehensive list of the available permissions, use the
@@ -363,14 +363,14 @@ They use a new handle_type, "sftp_dir", which gives access to the
 directory being read.
 
 In addition, sftp_readdir() returns a "sftp_attributes" which is a pointer
-to a structure with informations about a directory entry:
+to a structure with information about a directory entry:
   - name: the name of the file or directory
   - size: its size in bytes
   - etc.
 
 sftp_readdir() might return NULL under two conditions:
   - when the end of the directory has been met
-  - when an error occured
+  - when an error occurred
 
 To tell the difference, call sftp_dir_eof().
 

doc/shell.dox

@@ -245,7 +245,7 @@ provide a more elegant way to wait for data coming from many sources.
 
 The functions ssh_select() and ssh_channel_select() remind of the standard
 UNIX select(2) function. The idea is to wait for "something" to happen:
-incoming data to be read, outcoming data to block, or an exception to
+incoming data to be read, outgoing data to block, or an exception to
 occur. Both these functions do a "passive wait", i.e. you can safely use
 them repeatedly in a loop, it will not consume exaggerate processor time
 and make your computer unresponsive. It is quite common to use these