Enhancement to PR #1101 - add --rcv-timeout option to allow setting the timeout for receiving packet from the sender in a running test, instead of the constant 120 seconds set in #1101. This is to allow short timeout, so the server will not be "busy" for long time doing nothing. Also, the resolution is set to ms (with minimum of 100ms), as at least in fast networks that may be required.
Since both the server and the client can be a sender, the option is allowed for both. The server setting is for all tests - the client is not sending its --rcv-timeout setting to the server.
While changing the help message, few printf constants from other help lines were changed to parameters.
Adds an --dont-fragment flag that sets the DF flag in the header for UDP/IPv4 tests.
Co-authored-by: root <root@DESKTOP-L81E90U.localdomain>
Co-authored-by: Bruce A. Mah <bmah@es.net>
This lets iperf work better with multi-homed machines and
VRF.
Fixes#1089.
Based on a patch by Ben Greear <greearb@candelatech.com> via PR #817.
Co-authored-by: Ben Greear <greearb@candelatech.com>
* Issue 1065
* feat: Allow to configure a custom value for time drift between client/server for authentication
The use case is to support scenarios where it's not possible to enforce sync between client and server times.
* enh: drift redefined with skew
Co-authored-by: Francesco Marino <francesco.marino@cybaze.it>
This flag takes an optional argument, which is a format specification to strftime(3)...this allows for custom timestamp formats. Based on a suggested implementation by @davidBar-On. Towards #909.
The netinet/sctp.h header file defines HAVE_SCTP, so we have this
warning while building:
In file included from ../../src/iperf.h:30,
from ../../src/iperf_sctp.c:46:
./iperf_config.h:44: warning: "HAVE_SCTP" redefined
44 | #define HAVE_SCTP 1
|
In file included from ../../src/iperf_sctp.c:43:
/usr/include/netinet/sctp.h:56: note: this is the location of the previous definition
56 | #define HAVE_SCTP
|
This patch replaces our HAVE_SCTP definition with HAVE_SCTP_H to avoid
this warning.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This condition was only possible when configuration authentication
via the libiperf API.
While here, also fix a few other sundry issues:
* Remove arbitrary length limits on username and password.
* Improved error handling.
* Updated error messages for readability.
* Fixed minor typo in some identifiers.
Fixes#996.
This option simulates payload in iperf2, which is just repetitive pattern
(ASCII '0..9' repeating), as opposed to iperf3 where payload is random.
It might help in testing and reveal problems in networking gear with hardware
compression (including WiFi access points), where iperf2 and iperf3 perform
differently, just based on payload entropy.
* s/bandwidth/bitrate/ in user-facing places. Towards #583.
iperf3 has long misused terminology; bandwidth is a measure of
capacity. iperf3 measures bitrate or throughput. We standardize
on "bitrate" because it begins with the same letter as "bandwidth"
(to match the -b command-line option).
User-facing output mentioning "bandwidth" now uses "bitrate".
The long command-line option for -b (--bandwidth) is now --bitrate
(--bandwidth is transparently accepted for backward compatibility).
A few places in documentation that talk about bandwidth as a
measured value have been reworded to use bitrate or throughput.
There are a number of places in code where variables are still
called "bandwidth". We leave these alone for now.
A mention of "bandwidth" in the test parameters JSON also needs
to remain unchanged to avoid breaking compatibility. However,
the test results JSON never used the term "bandwidth" in
the first place.
* s/bandwidth/throughput in one place in RPM description. Towards #583.
* Add configurable timeout for the setup of the control connection.
This is specified using the new --connect-timeout option, with an
integer parameter in ms. The iperf3 client will wait for this
amount of time for the setup of the control connection to the
server. If this option is not given, the OS default for TCP
connection setup is used. Specifying a smaller connection timeout
allows faster detection of a down / unresponsive iperf3 server.
The implementation uses a variation on the timeout_connect()
function from OpenBSD's netcat utility.
Fixes#216.
We now reject all invalid format characters given as the
argument to the -f/--format flag. All valid characters are now
documented in the usage message and manual page.
Towards #566.
* Add --pacing-timer option to allow tuning of -b timers.
These control the granularity of the timer and hence burstiness
of iperf3's sends. The default is 1ms (1000), which is the default
starting with iperf 3.2. Follow-on to the commit in #460.
* Update manpage and release notes for --pacing-timer.
* Untangle some problems with printing summary statistics.
There were (at least) two problems:
o The server cannot print summary statistics as seen from the
client, because the server has to generate its summaries
before receiving any statistics from the client. This
shortcoming is somewhat hard-coded into the semantics of
messages on the control channel, and probably can't be easily
changed.
o UDP summary statistics for each stream were ambiguous in that
it wasn't clear whether they were intended to apply to the
sender or receiver.
To fix this, we split UDP summary statistics into two lines,
one for the sender side and one for the receiver side. This
hopefully eliminates any ambiguity about the statistics. On the
server, we don't attempt to print the (not very meaningful and
potentially misleading) statistics corresponding to the client.
Possible fix for #560.
* Try to report more accurate ending statistics.
Basically the client side was using only its measured test duration
to compute figures such as bitrate, but the server's test duration
could be different due to network delays/jitter. So we make sure
that the test durations (for each stream) are passed in the test
results and used appropriately when we print statistics for the
sender and receiver.
Towards #560, also this could help towards #238.
* Silence a warning over an uninitialized variable.
Add an optional mode that requires clients to authenticate with the server.
In this mode, clients need to provide a username and a password, which are checked against a password file on the server. The authentication credentials are protected by an RSA public keypair...the encrypted credentials are sent along with the test parameters.
Operationally the use of this feature places the following additional requirements on the build and installation of iperf3:
o The presence of the OpenSSL headers and libraries to build iperf3, and the libraries available on the client and server at runtime.
o Generation of an RSA public keypair; the private part is used by the server and the public part must be distributed to the clients.
o Username/password pairs for all authorized users, to be stored in a file on the server.
o Loose time synchronization between the server and clients (to within approximately 30 seconds).
o Appropriate command-line flags given on the client and server.
Note that iperf3 can be built and run as before, without fulfilling any of these requirements.
Partial documentation for this feature is included in this commit. It is anticipated that additional documentation text and editing will follow this merge.
Submitted by @ralcini. First suggested by @codyhanson in pull request #242.
Change the internal command-line option code for --dscp from the literal
'5' to a constant defined as OPT_DSCP.
Add manpage text for --dscp option.
Tweak help text for --dscp (while here, fix problem in --tos text).
Using a command line adding dscp (instead of tos) you can:
--dscp EF,CS1,etc.
--dscp 0x08
--dscp 63
These will provide the correct shifted left 2 tos value for these, and
for people that think in terms of dscp values, this is a goodness.
Having this option available lets an enduser clearly distinguish between
an old version of iperf with a non-working --tos facility, vs a
version where it works, with something saner that lets just specify
the dscp.
I did not come up with a good -? option for it, and used -5 internally.
* Dynamically determine an appropriate default UDP send size.
We use the TCP MSS for the control connection as the default UDP
sending length, if the --length parameter is not specified for a
UDP test. This computation replaces the former hard-coded 8K
default, which was way too large for non-jumbo-frame Ethernet
networks.
The concept for this solution was adapted from nuttcp. The
iperf3 implementation is pretty easy since we already were
getting the MSS for the control connection anyway (although we
needed to get it slightly earlier in the setup process to be
useful).
Towards issue #496.
While here, s/int/socklen_t/ in one place to fix a compile warning,
and bump a few copyright dates.
* Warn if doing a UDP test and the socket buffer isn't big enough.
This is surprisingly an issue on FreeBSD and macOS, where the MTU
over the loopback interface is actually larger than the default
UDP socket buffer size. In these cases, doing a UDP test over the
loopback interface (with the new UDP defaults) will fail unless a
smaller --length or a larger --window size is set explicitly.
Linux has larger UDP socket buffers by default (much larger than the
largest possible MTU), but even in the case that the socket buffers
are too small to hold an MTU-sized send, the kernel seems to do the
send correctly anyway.
Still working towards a good solution for issue #496.
* Further refinement on UDP buffer size settings.
If the default buffer size on a UDP test can't hold a packet,
then increase the buffer size to be large enough to hold one
packet payload. (If the buffer size was explicitly set, but too
small to hold a packet payload, then warn but don't change the
buffer size.)
Minor code refactoring to...factor out some common code into
a new iperf_udp_buffercheck() function.
Still working towards issue #496.
* First try to fix pacing issues. Code compiles, lightly run-tested.
Make --bandwidth only control application-level pacing, refecting
behavior of iperf 3.1.2 and earlier.
Add a new --fq-rate that controls only FQ-based per-socket pacing.
A given test can use application-level pacing, FQ pacing, both,
or neither.
Deprecate the --no-fq-socket-pacing option; specifying this generates
a warning and is equivalent to --fq-rate=0.
Towards issue #467 and related to issue #325.
* Move --fq-rate in the help text to be just below --b, tweak wording.
* Sigh. One more tweak on help text.
Some day I probably need to review and rewrite the whole thing.
Still working towards #467.
commit 2dc03630a736be2ae9f64823aabb5776e7074c2a
Merge: 61e325c 0da552c
Author: Bruce A. Mah <bmah@es.net>
Date: Thu May 26 09:40:58 2016 -0700
Merge branch 'master' into issue-325
commit 61e325c5d0a4e7a9823221ce507db0f478fc98b5
Merge: 227992f ccbcee6
Author: Bruce A. Mah <bmah@es.net>
Date: Thu May 26 11:09:54 2016 -0400
Merge branch 'issue-325' of github.com:esnet/iperf into issue-325
Conflicts:
src/iperf3.1
commit 227992f366e7f4895b6762011576ba22a42a752e
Author: Bruce A. Mah <bmah@es.net>
Date: Thu May 26 11:07:01 2016 -0400
Don't set SO_MAX_PACING_RATE if the rate is 0. Also tweak some help text.
Towards #325, in response to feedback from @bltierney.
commit ccbcee6366d50ec632fc00eb11fde8a886f8febe
Author: Bruce A. Mah <bmah@es.net>
Date: Tue May 24 09:19:41 2016 -0700
Fix manpage formatting for consistency.
commit 90ac5a9ce09bd746ca5f943a8226ab864da3ebf8
Author: Bruce A. Mah <bmah@es.net>
Date: Tue May 24 12:14:16 2016 -0400
Add some documentation for fair-queueing per-socket pacing.
For #325.
commit 5571059870f7aefefb574816de70b6406848888f
Author: Bruce A. Mah <bmah@es.net>
Date: Tue May 24 11:55:44 2016 -0400
Change the fair-queueing socket pacing logic in response to feedback.
By default, on platforms where per-socket pacing is available, it
will be used. If not available, iperf3 will fall back to application-
level pacing.
The --no-fq-socket-pacing option can be used to forcibly disable
fair-queueing per-socket pacing. (The earlier --socket-pacing option
has been removed.)
Tested on CentOS 7, more testing on other platforms is required to
be sure it didn't break the old application-level pacing behavior.
For #325.
commit 3e3f506fe9f375a5771c9e3ddfe8677c1a7146e7
Merge: 50a379e 3b23112
Author: Bruce A. Mah <bmah@es.net>
Date: Tue May 24 09:54:39 2016 -0400
Merge branch 'master' into issue-325
commit 50a379eddfa89d1313d2aeeb62a6fbc82f00ea17
Author: Bruce A. Mah <bmah@es.net>
Date: Sat Apr 16 02:55:42 2016 -0400
Regen.
commit 200d3fe3917b3d298bdf52a0bde32c47cf2727b0
Author: Bruce A. Mah <bmah@es.net>
Date: Sat Apr 16 02:41:32 2016 -0400
Checkpoint for initial work on #325 to add socket pacing.
This works only on Linux and depends on the availability of
the SO_MAX_PACING_RATE socket option and the fq queue discipline.
Use --socket-pacing to use SO_MAX_PACING_RATE instead of the
default iperf3 user-level rate limiting; in either case, the
--bandwidth parameter controls the desired rate.
Lightly tested with both --tcp and --udp, normal and --reverse.
Real testing requires analysis of packet timestamps between
multiple hosts.
Contains an alternate implementation of previously-submitted patches
to set the maximum segment size and no-delay options.
As a result of this change, SCTP functionality on Linux will generally
require the libsctp library (on CentOS and similar distributions this
is provided by the lksctp-tools RPM).
Part of #131.
Submitted by: Bruce Simpson <bs48@st-andrews.ac.uk>
Primarily useful for bwctl integration, this is enabled with the -1
and/or --one-off flags.
Fixes#230, based on a patch by @i2aaron.
Signed-off-by: Bruce A. Mah <bmah@es.net>
size.
This appears to be necessary on some long, high-bandwidth paths
to get sane results, either by reducing packet loss or by somehow
allowing the sending host of a test to go faster.
Fixes#219.
with system header <locale.h>.
This apparently fixes problems on an ARM build, but this was generally
broken anyway. It's slightly amazing this didn't cause problems before;
perhaps we never used <locale.h> before?
Addresses #203.
